**Model**
This 3D Printed RC Utility Boat is a large catamaran air boat powered by a brushless motor. The boat is designed to carry environmental and water quality monitoring equipment. It is capable of carrying a large payload inside the hull as well as on the optional modular deck system and water sample system (STLs shortly) and the underwater FPV module ([here](https://thangs.com/electrosync/Dome-Housing-for-Underwater-Pan-and-Tilt-Camera--44080?manualModelView=true))


[Build Videos](https://youtube.com/playlist?list=PL8GvyQkytuDe1de9TAWhmk2fqm0deYAWv)

**Print Settings**
- This is a big project and all the print settings can be found in the print guide [here](https://electrosync.com.au/wp-content/uploads/2021/06/Electroysnc-3D-Printed-RC-Boat-Build-Guide.pdf)

**Hardware Required**
- See build guide.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

3D Printed RC Catamaran Utility Boat

Assembly.stl

1. Hull - Section Stern.stl

2. Hull - Section 1.stl

3. Hull - Section 2.stl

4. Hull - Section Bow.stl

5. Hull - Tray Support.stl

6. Hull - Tray.stl

7. Hull - Tube Mount.stl

8. Hull - Rear Hatch.stl

9. Hull - Rear Hatch Rail.stl

10. Hull - Front Hatch.stl

11. Hull - Hatch Clip.stl

12. Drive - Motor Mount Left.stl

13. Drive - Motor Mount Right.stl

14. Drive - Motor Mount Clamp Left.stl

15. Drive - Motor Mount Clamp Right.stl

16. Drive - Rudder Mount.stl

17. Drive - Rudder Left.stl

18. Drive - Rudder Right.stl

19. Drive - Rudder Linkage Spacer.stl

20. Drive - Rudder Linkage Horn.stl

21. Drive - Servo Mount.stl

22. Drive - Servo Mount Clamp.stl

23. Hull - Old Section 1 .stl

24. Hull - Old Section 2.stl

25. Fin.stl

3D Printed RC Catamaran Utility Boat

Category: