VESA 60mm Offset Mount - Monitor Arm Helper

60mm for 100mm...

100mm VESA 60mm Offset Bracket... Say that 5 times fast!

My Portrait orientation Monitor was too low on it's VESA mount. This has a 60mm Offset to relocate the VESA mount of a Monitor (100mm VESA). A file for a 8mm Screw Spacer is included for if your VESA Mount is recessed.

Screw through the VESA mount plate into this bracket (holes sized for M3 screws), then screw the offset plate to your monitor. The monitor I tested this on was rather light, 7.7lbs (3.5kg).

If you need MORE offset, check out my 100mm Version: https://social.thangs.com/m/56737

• FILES INCLUDED:
  • CAD STEP File of Assembly to modify for your needs. (Please credit any Remixes: MandicReally)
  • 100mm VESA Offset Bracket
  • 8mm Screw Spacer

• PRINT PARAMETERS:
  • Recommend a minimum of 4 Perimeters (or whatever you need to achieve 1.5mm+ Shell Thickness). Personally I printed at 6 for additional support around screw holes.
  • Minimum 25% Infill Recommended (100% is overkill.)
  • PETG or Other Higher Temp materials recommended to avoid distortion over time.
  • No Supports Required
  • If you need a Taller or Shorter Spacer just Scale on Z-axis only in your slicer or modify in the STEP file.

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.HotRodHippie.com/links

• DISCLAIMER:
  • USE AT YOUR OWN RISK. I can't validate that a really heavy monitor will be happy on this mount. The monitor I tested this on was rather light, 7.7lbs (3.5kg) and had almost zero flex after months of use.

All of my Designs are covered by a Creative Commons Non-Commercial License. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.