Spray Paint Cap Adapter - Rustoleum to Montana Tip!

This part is a Spray Paint Can Cap Adapter. It allows you to use a Male Cap Nozzle on a Rustoleum can which has a Male Tip. Various "aftermarket" tips have various flow rates, fan spreads, and other characteristics someone may want when spraying paint. This allows you to use that wide variety of "aftermarket" tips on a standard Rustoleum paint can. As well as having Wings on the part for finger options when spraying and aid installing/removing the adapter.

Remove the stock Rustoleum Cap, Install the New Cap onto your Adapter, then Assemble the Adapter/Cap onto the Rustoleum Can.

This is a VERY tight fit to the can tip and the new Cap. It is meant to be this way so that the seal and fit is good. It does require a strong push together to assemble. Wings can aid in removal.

• PRINT PARAMETERS:
  • Recommend printing with the "Top" smaller end on the build plate.
  • Supports required
  • .16mm Layer Height
  • 100% Infill Ratio

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.HotRodHippie.com/links

All of my Designs are covered by a Creative Commons Non-Commercial License. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.