Social Media Calibration Cube - Flex your precision!

Do it for the 'Gram!

Many 3D printers use "Calibration Cubes" as a way to test their machine to see if it is operating properly. This is my version of a Calibration Cube that features various Social Media logos for... reasons. It just seemed like a silly thing to make and that people could print for Social Media posts, so here it is! Features TikTok, YouTube, Twitch, Instagram, Patreon, and my own RLY on the cube.

Please consider checking out my Social Media Channels: https://www.hotrodhippie.com/links

The Cube is designed to measure 20mm cubed, so when you are completed printing it you can check the dimensions with vernier calipers and confirm if they are correct. Each of the Logos should be 1.8mm deep at their deepest point (Except Patreon on top which is 10mm.). RLY on the bottom should be .6mm deep. This is handy to check for ghosting as well (where you see the edge continuing into the surface next to a detail).

• ** PRINT PARAMETERS:**
  • .1 or .2mm Layer Height Recommended
  • .4mm Nozzle Recommended
  • 3 Perimeters / Walls Recommended
  • 10%+ Infill (I use Rectilinear)
  • NO Supports Required

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.HotRodHippie.com/links

All of my Designs are covered by a Creative Commons Non-Commercial License. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally