Printing Printer Parts!
This is a mount to install an Antclabs BL Touch onto the Biqu H2 Direct Drive Extruder. It mounts to the "front" of the Biqu H2, to the side of the extruder drive wheel. This is intended to work with Part Cooling fans mounted behind the extruder or in some way that does not use the front Biqu H2 mounting screw holes (see Photos).
For Firmware - Probe Offsets: X: 34.499 Y: -28.785mm Z: 2.2mm NOTE: Z-height must be calibrated on your machine, this is just a rough baseline to start from. NOT responsible for a nozzle crashing into your bed.
2 Files are included, one for threading M3 screws directly into the BL Touch mount, or the other is intended to have Heat Inserts pressed into it (the way I intended the design to be used). Links below should point you toward the necessary parts if you want to do either method.
I used this on my Ender 5 Plus with the Biqu (BigTreeTech) H2 extruder & a Linear Rail mod. Anyone want the additional design files?
- Necessary Parts (Affiliate Links):
- Biqu H2 Extruder: https://amzn.to/3qKccqZ
- ANTCLABS BL Touch: https://amzn.to/32ZBedJ
- M3 Screws: https://amzn.to/3yXDjBY
- M3 Heat Inserts: https://www.mcmaster.com/97171A310/
- INCLUDED FILES:
- CAD STEP File to learn how I designed these.
- BL Touch Mount - Thread Into Plastic
- BL Touch Mount - Heat Set Inserts Version
- PRINT PARAMETERS:
- No Supports Required
- 4 Perimeters Recommended (Thread holes)
- 25%+ Infill (I used Rectilinear)
Mine were printed in GreenGate3D "BubbleGum Pink"
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.HotRodHippie.com/links
All of my Designs are covered by a Creative Commons Non-Commercial LIcense. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.
PLEASE Credit any and all Remixes of my designs: MandicReally