tracking pixel
Alan M

Bambu Lab - Fresh Air Fan 40mm Fan Mod!

by
MandicReally
Follow
Follow
Remix Model
MandicReally
MandicReally
|
Image 2 of 9
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
MandicReally
MandicReally
|
Image 2 of 9
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
2D
3D
Makes
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
Bambu Lab - Fresh Air Fan 40mm Fan Mod! 3d model
This model is restricted by licensing terms. 

Fresh Air Fan, Freaking Fabulous!

The stock Bambu Lab X1 / P1 fan location is... terrible. It doesn't get fresh air and is difficult to reach. This mod is a printable mount to install a 40mm fan closer to the back panel vent so it can be a Fresh Air Fan! You can use the original 40mm or change to another (quieter & more reliable) option. We recommend the Noctua 40mm x 20mm fan for its performance and quite sound profile.

Could be used in any application where you need additional cooling & can fit it. I just designed it with this Bambu application in mind.

NOTE: The Bambu fan is 4-wire PWM & 5V! TAKE CARE to wire a replacement fan properly & choose the proper fan voltage. WE ARE NOT respsonible for damage to your machine! We cannot garauntee that Bambu has not changed something about the wiring & fan design that may pose a danger to your electronics with aftermarket fan options! They change things all the time, it is hard to keep up.

Installation Steps - Reference Bambu Fan Replacement for more info :

  • Remove Rear Panel
  • Print the version you need (20 or 10mm depending on your fan choice)
  • Insert M3 Heat Inserts on Underside (see photos)
  • Apply VHB Tape to the area marked in RED on the Rendered image.
  • Install Fan to Bracket with M3 Screws (30mm for 20mm vers. / 20mm for 10mm vers.)
  • Locate over the silver heat sink and stick to the “Poop Chute” (see image)
  • Reinstall Rear Panel

Parts Needed (Affiliate Links):


Files Included:

  • Bambu Fresh Air Fan STEP File
  • Bambu Fresh Air Fan 20mm Vers STL
  • Bambu Fresh Air Fan 10mm Vers STL

Recommended Print Settings:

  • 2 Perimeters
  • 20% Infill
  • No Supports Required
  • ASA/ABS/PETG Filament recommended (in that order)

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.MandicReally.com/links

Designs covered by a Creative Commons Non-Commercial Share-Alike License. Commercial resale is never authorized without written permission. Want to become an Authorized Reseller? Become a Patron on the “Merchant” Tier on my Patreon to begin selling today: https://www.Patreon.com/MandicReally


46 Likes147 DownloadsJanuary 12, 2024


46 Likes147 DownloadsJanuary 12, 2024
This model is restricted by licensing terms.