The KROMATIK Collection features sweeping angular channels that capture the surrounding light, shadow, and colors in a striking manner. This reflection grounds the pieces within their environment while their dramatic forms make them stand out.

KROMATIK 003 was designed for printing in 'vase mode'. When printing at 100% scale I recommend a 0.8 mm extrusion width and 5-10 solid bottom layers for a strong and watertight model. Of course you're always encouraged to experiment with scale and settings... you may discover something special!

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included 'Solid' versions for standard printing, with 1 mm and 1.2 mm thick walls. I've found the vase mode version to work well, but certain printers and situations may benefit from the solid version (eg. resin printing).

When using this as a pot for live plants, it pairs well with my 140 mm Floating Drip Tray to catch excess water runoff.

Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PLA Marble filament.* *_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_1.