tracking pixel
Devin B

EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring

by
Make Anything
Follow
Follow
Remix Model
Make Anything
Make Anything
|
Image 3 of 4
EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring 3d model
Make Anything
Make Anything
|
Image 3 of 4
EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring 3d model
2D
3D
Makes
EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring 3d model
EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring 3d model
EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring 3d model
EZPZ Keyring Bubbles 0.75" x 1.5" // Keychain Ring - Keychain printed at 150% - 3d model
This model is restricted by licensing terms. 
39 Likes55 DownloadsJanuary 24, 2024
This model is restricted by licensing terms. 


This simple key ring works better than you might expect for a little piece of plastic! Easy to print in place with no supports required, just separate the small gap after printing. This is a handy 'bubble' variation that combines two rings. It's 0.75" tall and 1.5" across. I wouldn't dangle my Lambo keys from it, but it is fairly sturdy.

Relevant Short

Printing Guidelines

  • Print with 4 shells/perimeters to create a solid part
  • 0.16mm layer height separates easily after printing

After printing, the gaps should separate fairly easily. You may need to use your clippers to split the ends first, then the remainder of the ring should pull apart.


39 Likes55 DownloadsJanuary 24, 2024
1




This model is restricted by licensing terms. 
39 Likes55 DownloadsJanuary 24, 2024
This model is restricted by licensing terms.