Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:781145.
JD is a 3D printable biped humanoid that clips together with EZ-Bits. You can change the appearance and build of this robot by connecting the parts differently to build any configuration. Here's a video of it working: https://youtu.be/4MweeM97G9c
Print Settings
Rafts: Yes
Supports: Yes
Infill: 30
Filament brand: Canadian Filaments
Filament material: PLA
Notes:
Here is how the parts clip together: https://www.youtube.com/watch?v=Rm4H5y_RLVY
The instructions involve photos, which you can find here: https://www.ez-robot.com/learn-robotics-getting-started-humanoid-robot-kit.html
The servo mounting holes can be difficult to fit onto the servo output gears. Here's a tutorial to help you along the way: https://synthiam.com/Community/Tutorials/Strengthen-Servo-Splines-in-3D-Printed-Brackets-17948
The larger servos used in this robot's arms and legs are here: https://www.ez-robot.com/store/p16/servo-motor/Heavy-Duty-Servo-Motor/DIY-Servo-Motor.html
The smaller micro servos used in the head, neck and grippers are here: https://www.ez-robot.com/store/p19/servo-motor/Micro-Servo/Mini-Servo-Motor.html
The camera for the head is here: https://www.ez-robot.com/store/p64/robotics-camera.html
The RGB eyes are here: https://www.ez-robot.com/store/p52/18-rgb-led-block.html
The EZ-Bv4 Robot Controller Brain is here: https://www.ez-robot.com/store/p24/EZB-smart-robot-controller.html
The LiPo battery is here: https://www.ez-robot.com/store/p25/robot-power/lipo-battery.html
The internal wiring harness + power switch is here: https://www.ez-robot.com/store/p89/wiring-harness-short.html
The iOS and Android App can be downloaded here: https://www.ez-robot.com/mobile-robot-software.html
Windows software for programming JD can be found here: https://www.ez-robot.com/pc-robot-software.html