Dual Clip

21K downloads · 2 years ago · Dual Clips are a common Multiboard connection piece. They are mostly used to connect Plates or Tiles

This model is restricted by licensing terms.

View license.

Description

Dual Clips are a common Multiboard connection piece. They are mostly used to connect Plates or Tiles together, as well as beams, and Bin Dividers.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Tags:

Community Makes (3)

solved the gap problem with my remix:
https://makerworld.com/it/models/2013725-multiboard-reduced-lenght-dual-clip-no-gaps

Isue with new tiles, that have small hole near border. Dual clip doesn't go all the way in because attachment hole has different shape.

I've printed probably around 50 of these and they work fine. This is the only one I have that isn't in use. I've broken a total of 2 out of the 50ish due to repeatedly installing them into different parts and pulling them out with pliers etc.

If you're struggling to install these:
1) Print the Clip Tool that is for handling these.
2) Try printing them in something like ABS or PETG that has a little flex. PLA doesn't flex, it just breaks.

Community Makes (3)

Discussions

MadSciSlack9 months ago

I've printed probably around 50 of these and they work fine. This is the only one I have that isn't in use. I've broken a total of 2 out of the 50ish due to repeatedly installing them into different parts and pulling them out with pliers etc. If you're struggling to install these: 1) Print the Clip Tool that is for handling these. 2) Try printing them in something like ABS or PETG that has a little flex. PLA doesn't flex, it just breaks.

PrinterFlashforge Adventurer 3

Print bed sizeX: 150 mm; Y: 150 mm; Z: 150 mm

MaterialABS

Layer height0.2 mm

Infill density15 %

platini767 months ago

solved the gap problem with my remix: https://makerworld.com/it/models/2013725-multiboard-reduced-lenght-dual-clip-no-gaps

PrinterBambu Lab H2D

MaterialPETG

e.zemeckis9 months ago

Isue with new tiles, that have small hole near border. Dual clip doesn't go all the way in because attachment hole has different shape.

MaterialPETG

Layer height0.2 mm

SupportsNone

BrimNo

platini767 months ago

same problem here, how did you solve?

skovsende11 months ago

Why is this file 1.2MB in size? That seems slightly excessive

MadSciSlack9 months ago

Are you from 1990 and still using dial-up? That's nothing, and furthermore why would you publicly complain about a 1.2MB file size?

knight45766 months ago

Still fits on a 3.5" floppy!

darkunderarms88 months ago

lol

robertspendlove7 days ago

Maybe he's asking because it's a simple file that doesn't need to be that size, and it's possible the file has a nefarious payload attached if it is supposed to be much smaller. Perhaps the designer can enlighten us.

carajean2062 months ago

Ok I printed these out of petg.... I will never do that again. My fingers are bruised so if you are of the gentler species print in something else.

shartim4683 months ago

I'm having trouble printing them? Every time i try to they never stick to the plate and cause a clogged mess even using 3d glue. Any tips to solve this issue? If not do i even need this to connect the tiles together?

twoods28 months ago

my duel clips are also a pain to install, I use a softblow hammer to install then pliers to force plates together

e.zemeckis9 months ago

This clip works with older tiles, but it fits poorly in newer ones. When using new tiles there is gap between them. Old tiles has different holes for fixing. It would be nice if author fix this isue.

gaiadrazer10 months ago

welp sh1t, I was brought over here from the Multipoint Plates page. but apparently we needed "thin dual clip" to fit those. the link needs to be fixed

MadSciSlack9 months ago

What parts were you attaching? This info might be helpful for others now that you've resolved it.