Tube Junction

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5242358.

Today we bring you a fully customizable tube junction, inspired by our Boat Rail Base.

This was created by request and is currently a work in progress.

Did you know?

Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects:

https://codeandmake.com/premium

OpenSCAD Customizer Options

We recommend you use OpenSCAD to customize this design.

This design has the following Customizer options:

General

• Configuration - The type of junction
• Material_Thickness - Thickness of the material

Tube

• Tube_Profile - The shape of the tube
• Round_Tube_Inside_Diameter - The inside diameter of the round tube
• Rectangular_Tube_Inside_Width - The inside width (X/Y axis) of the rectangular tube
• Rectangular_Tube_Inside_Height - The inside height (Z axis) of the rectangular tube
• Min_Tube_Length - The minimum length of the tube
• Tube_Bevel_Percentage - The amount to bevel the end of the tube (as a percentage)
• Grub_Screw_Hole_Diameter - Grub screw hole diameter. Not threaded. Will require manual tapping.

Material

We recommend printing this in a durable filament, such as ABS, nylon or even metal!

Versions

• 0.1 (11 Feb 2022) - Initial version - work in progress

Printing

Recommended slicer settings:

• Resolution: 0.1mm - 0.2mm
• Infill: ~50% or higher if you need it to be extra durable.
• Supports: Should not be required for small parts. May be necessary for larger parts, depending on chosen settings and orientation.
• Rafts: Not required, unless you experience adhesion issues.

License

The "Tube Junction" models (.stl) are licensed under the CC BY license by Code and Make.

The "Tube Junction" code (.scad) is licensed under The MIT License by Code and Make.

Note: 'BSD' license has been selected as it is the closest available option in the list.

We are proud to offer content to you absolutely free.

We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:

https://codeandmake.com/support

We thank you so much for your support!