Cinderwing3D

HAPPY JULY CINDERS!!! I hope you all had a safe 4th of July! I am starting this month off with a new thing! I made these for my kids and they've been having SO much fun with them magically clicking everything with their wands! I might end up making more of these if you all like them!!!!!!- TracyPS.

HEY CINDERS!Ok so.... I don't entirely understand the dumpling thing but I've been getting SO SO many requests I decided to take a crack at it? I thought it'd be cute to also make them clicker tail versions so..... here you go! I had a lot of fun making all the folds to make it look extra squishy!!

HEY CINDERS!Well, you all REALLY liked the Golden Retriever from the Pet hatchling pack so.... I made a few more puppies!!!!!!!!! I actually have a whole bunch of rotties so of course I HAD to! I don't know if I'll make even more (more doggies) in the future as right now as I still want to fill out

HEY CINDERS!I don't make too many models that I get to tap back into the fact that I am a veteran but with July coming up I wanted to make a little eagle! I see a lot of stand up eagles so I thought it'd be nice to make a floppy one for some variety! Thanks Admin Jazzy for the paint jobs!- Tracy DO

HEY ALL!So this one is a but out of my normal but my in laws wanted a BIGFOOT and while I was at it, made a Yeti too! I figured this would be something you all would want to so with their ok I wanted to give it to you all as well! I hope you all enjoy this funny model!- TracyDownload the BIGFOOT!Do

HEY CINDERS!!!!!!!!!!!!So this one has been a long time coming! This was the model I teased back IN January 2026 but ended up taking a bit longer than expected because I wanted to make sure this was P E R F E C T before I got it to you all! This is the cumulation of all the previous standing models

HEY ALL!Finishing this month up with the cutest set to date! Say hi to the PET HATCHLINGS! I already made a cute kitty before but I wanted to make some more pets to finish up the set a bit!!! I also wanted to say THANK YOU for all the pack suggestions! It's so helpful!!!- Tracy Download Here! FILAM

CINDERS!!!!! HI!!!HEY EVERYONE! I am SO SO SO EXCITED for this one!!! I do not have much of a green thumb myself so keeping plants alive can be tough for me.... so why not just MAKE ONE! This one took a bit to get JUST right and I'm really happy with the results!!!!!A new hatchling pack is on its w

HEY CINDERS!!!Trying to get ahead this year so I'm going ahead and dropping this Tiny Star Cookie! As always with these models I have a WYVERN with 2 legs, 2 wings and a DRAGON with 4 legs and 2 wings! I always get asked so I wanted to make sure to say it here!! I hope you all enjoy this YUMMY COOK

HEY CINDERS!!!Starting off May with this sweet TREAT! I have said before I LOVE LOVE LOVE chocolate strawberries and I wanted to make a cute little turtle because I've been feeling the turtles lately! I'm currently finishing up the last bits on this month's dragon as well and I'm REALLY excited for

HEY CINDERS!!!You know what time it is!!! Hatchling time! With spring here, I imagine a lot of the ponds and such are starting to wake up and I wanted to bring a little bit of that into this pack! I know the axolotl and koi have been big requests too! I hope you all enjoy!!!!!!- Tracy DOWNLOAD HERE

HEY CINDERS!!!This one has been in the works for some time! I wasn't quite sure how to translate bee into a dragon but since you all loved the Death's Head Moth Dragon SO much, I had to try!!!! I really think it came out well and I hope its fun for you all to print!- Tracy Download the fullsize HER

So I didn't actually plan to make this one so fast but you all ABSOULUTELY wanted this one as soon as possible!!!!!!!!!!!!! I do my best to listen to everyone when the requests get crazy!!! I hope you'll forgive the extra cupcakes so soon after the Birthday Dragon!!Just like the dragon it has both

HAPPY APRIL CINDERS!!!!!!!!!!!!!It's basically tradition at this point.... I made the original as a one off silly thing but now I look forward to making something every year now!!!! It's also a great chance to mess around with some new things...👀 I hope you all enjoy this silly model!!!- TracyDOWN

HI CINDERS!!!Would you all believe... it's my BIRTHDAY TODAY????? I wanted some cake so I whipped up this sweet treat for us all to share!!!! I wanted to make this one a little extra too so I also made a clicker version!!!!!! I thought it would be so cute and it is!! Thank you all so much!I'm all b

HEY CINDERS!!! Ever since I did some Tiny style farm animals you all have be BEGGING for some Farm Hatchlings!!! These guys are super cute and I had a little fun with the horse paintjobs too! I know some of you will be really excited for the chicken and rooster!!!!!!! Thank you all as always!!! Dra

HEY CINDERS!!! You all seemed really excited for the Cherry Blossom Wyvern and Dragon so I decided to toss another one up! With Easter coming up soon I wanted to get this one too you quick as I could! I think this one turned out extra CUTE! I'm feeling WAY better now but I'm still not quite at 100%

HAPPY MARCH CINDERS!!!!Hey!!! It's been a minute since we had some spiders and since I've been sick... I've been eating a lot more fruit!!!! I thought it'd be cute to spin up a little spider pack to go along with that! I hope you all enjoy!!!- TracyDOWNLOAD HERE FILAMENT and Tools: https://www.amaz

HI CINDERS!!!! It's time for another hatchlings pack!!!!!! This was not actually the pack I had planned on but due to me and the whole family getting SICK! I decided to release this part 2 pack a little early so I could rest up! The Llamacorn might be my favorite thing I've modelled all month i LOV

HI CINDERS!!!! This is one of those highly requested designs that ended up taking a little bit longer than expected because I REALLY wanted to make sure the flowers printed well at smaller scales and THEY DO! I hope you all enjoy this cutie!!!!!!!!!!- TracyDOWNLOAD HERE FILAMENT and Tools: https://

HI CINDERS!!!!So after the Smore's Dragon, I got a LOT of comments saying that it kinda looked like a cow and a lot of you wanted to see a Cow Dragon? I was being silly one night and decided to have a try at it and.... I fell IN LOVE WITH IT!!!!! It's SO cute!!!!!!!!!!!! So here is this month's dra

HAPPY FEBRUARY!Hey all! I was playing more with the clicker ideas, and the kids really wanted a little something for Valentine's and I thought a Key to your heart would be SO cute! They also work as a keychain! They really enjoyed playing with this so I wanted to share it all with you! Would you li

Hey Cinders!!!I just wanted to come in today and say thank you again for ANOTHER YEAR OF CINDER! January 2022 is when I released the original Crystal Dragon and I try to do something a little interesting each January to commemorate it! This year however the model is still needing a little bit more

HI CINDERS!!!So how many of you guessed there would be a dragon with a clicker tail happening???? I've been so excited to do this and HERE IT IS! This beautiful dragon came because one complaint I got a lot about the Rose Dragons is that they were kinda pointy? I wanted to make a not pointy rose!!!

HI CINDERS!!!Today I have for you a little splash of Spring! I've been getting a lot of requests for bug hatchlings??? Y'all request some crazy stuff sometimes haha!!!!!! Depending on how things go there might be a Bug Pack 2 in the future!!! Let me know what you think!- TracyDOWNLOAD HERE! FILAMEN

Continuing the Heart theming with a new tiny dragon/wyvern release!!!! I've seen folks asking for some new ones and I thought a cute heart themed one would be great! I really am trying to get y'all holiday type models earlier!!! I hope you all enjoy this sweet treat!!!!- TracyPS! The Dragon has 4 a

HAPPY 2026 CINDERSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!Starting off the new year with some cute Heart Turtles!!!!!! These are so cute, and I had a lot of fun making the heart shaped shell!This month is Cinderwing3D's 4th year!!! It is CRAZY and I truly appreciate you all being here with me and my family!!!

CINDERS!!! HI!As I said in the last release, I am finishing this month up earlier than normal! I'll be away with my family until Jan 4th! Admin Jazzy will still be here to take care of things as usual! I have a new hatchling pack for you!!! I've always made long flexi dragons, and I wanted to make

Hi Cinders!!!!!Remember how I said no more cookie DRAGONS for a bit???? Well I didn't say anything about SPIDERS! A lot of requests came in for Tiny Spider Cookies and who am I to say no???Hope you all enjoy! One more set out for this month and I'll be done for the month! I wanted to make sure I sp

HELLO CINDERS!!!Today I am releasing something... different and new! At least to me haha! My kids have really been enjoying these clickers and I decided to try and make one myself!!!! I designed these in mind specifically to use the Pawpers from Pawpular Prints and they were so kind to provide a fi

HEY CINDERS!!!Like I said in the last post, I'm MOVING FAST! SO today.... is this month's dragon! The Holly Wyvern! This was a simple but challenging design because I wanted the wings to look a certain way and it took a long time to tweak them until I was happy! I hope you all enjoy this one! More

HAPPY DECEMBER CINDERSSSSSSSS!!!!Wanted to start this month off with.... A SWEET TREAT. I LIED! Y'all get more cookies!!!!!!!! I wanted to make some little gingerbread pals that I could use as tree ornaments and whipped these up! Theres 8 different styles to choose from! They all print fairly quick

HAPPY HOLIDAYS CINDERS!!!!!!!Just in time before Thanksgiving for a lot of you, the last model of the month, the Chocolate Chip Cookie Dragon!! This dragon features beautiful milky feathers and yummy chocolate chip cookies! This is a design I was 100% sure on but everyone seems to LOVE the cookies,

CINDERS!!!This one was actually a request from my mother in law and it felt like a fun pair to have Tiny Bear and the Tiny Moose come out around the same time SO! Enjoy this moose!!!!One more model for this month! We are in the home stretch!- TracyDOWNLOAD HERE! FILAMENT and Tools: https://www.amaz

Hey CINDERS!!!!! It's been a MINUTE since the last Tadling set so this one's a bit bigger! Shoutout to Tester Eli and Admin Jazzy for getting this pack together! This pack comes with Keychain versions AND color 3MFS! Hope you all enjoy! Two more releases this month!!!!- TracyDOWNLOAD HERE! FILAMENT

Hey CINDERS!!!!! My family has been asking me for a few critters lately and I thought they'd make for some great "TINY" style models so.... ITS BEAR TIME! This one comes with a Santa hat version too! All paint jobs shown in the photos come with download too, painted by Admin Jazzy of course!!Thank

This month I wanted to get these hatchlings out a little bit early for all your Holiday printing! This pack is a bit different in that it comes with Santa versions of each hatchling! I also included a Rudolph version of the Reindeer just to cover all the bases!! I've got more holiday models coming

HAPPY NOVEMBER CINDERS!Hey!! Starting off the month with another turtle because I've been feeling them lately! Along with the Apple Pie Turtle this was another highly asked for design! My kids LOVED this one! I've got some more sweet treats cooking up this month that I can't wait to share! Thank yo

HEY CINDERS!And finishing up this month I have a new hatchling pack for you all! This one is featuring some of my favorite woodland friends! The turkey might be my favorite, and the paint job is based off my own turkey!!! I hope you all enjoy these little ones!!!! I got some fun plans for next mont

HAPPY HALLOWEEN!!!!!!!So I want to preface this that I 100% completely understand this is coming out late for the season but I REALLLLLLLY wanted to do it! I do strive to get the models out ahead of season but sometimes you just get hit with inspiration and BAM CANDY CORN DRAGON!!!!I really do hope

HEY CINDERS!I know this Halloween release is cutting it a bit close but I just LOVE making spooky models and I HAD to make a spider set for the month!!! This set features a Candy Corn, Eyeball, Cauldron, Crossbones Skull, and a Poison Apple!! One of these is a hint to the dragon for this month too

HEY CINDERS!Today's release is a bit interesting! I saw a few comments asking for some bone snakes and thought HEY that would be fun for Halloween! I took it an extra step and made RATTLESNAKES because there are a ton of them around me 😅!!!! This release has 3 different sized sneks, a Tiny, a Baby

HEY CINDERS!Today I have for you another cute bird! With winter coming up I figured this would be a great time to drop this TINY CARDINAL! I wanted to make a sturdy bird that could sit anywhere and look cute! This one comes with two color styles, since everyone forgets about the lady Cardinals and

HEY CINDERSSSSSSSI actually didn't plan on making another Cookie Dragon this year as I went a LITTLE crazy with them this year but folks kept asking for this one so I went ahead and MADE IT! This is NOT the dragon for this month but I wanted to get it out early enough for everyone to print for Hall

HAPPY OCTOBER CINDERS!!!Starting off this month with a sweet treat! It's been a minute since I made a turtle and with the holidays coming up... it's time for some PIE! I like my pie with some ice cream, so I also made a version with a scoop on the top!! ENJOY!!!- TracyDOWNLOAD HERE! FILAMENT and To

HEY CINDERS!!!!!I was a little worried this wouldn't be "halloween-enough" for the season but the testers assured me it was perfect!! So today I present to you the DEATH'S HEAD MOTH DRAGON! Featuring a new wing style and more insect like features! The BABY is also releasing along sid

HEY CINDERS!!!!!This one was a HOOT to make!!!!!!! I really wanted to make an owl that was FULLY print in place, without any assembly and so I came up with this one! Jazzy painted all those spots by hand!! Apparently it took forever... oops.This model has a supported head that you just need to twis

HEY CINDERS!!!!!So a few (a lot of you... haha) had a suggestion for a little Pumpkin egg for the Spooky Hatchlings and I thought it was a great idea!! I whipped this up as quick as I could! the vine also works for KEYCHAINS! Yay!On TOP of this my kids really wanted some HALLOWEEN HORSES! So I pain

ITS SPOOKY TIME CINDERS!Getting this month's Hatchling pack out a LITTLE sooner for all your HALLOWEEN MARKETS! I tried to make a fun spread that works well for Halloween but also for year-round! These all have basic color 3mfs and Tester KELCY also did 4 additional paint jobs for the Cat!! I'm fin

HEY CINDERS!!!!Today's release is a simple one but one weirdly asked for a lot? Apparently everyone likes tiny octopus so.... I turned it into a pumpkin! Some of you Cinders who have been around for a long time (THANK YOU!!!!!) may remember the Harvest Lurker! This is basically a MUCH cuter version

HEY CINDERS!So, to start off September I have a special little SURPRISE! The original Nightwing Dragon was always a favorite, but it wasn't in my usual CINDER style so.... I made one!! This one feature all the same cool lunar hooks to hang off all sorts of things! This one also has a full paintjob

SURPRISE! I know y'all have been wanting some more decor but to be real, I don't feel super confident in making them! You know who is though? GAZZALADRA! He makes the loveliest decor items! You may know him from all his cool mushroom shelves, and I thought, HEY I HAVE MUSHROOMS! So here we are!Plea

Hey everyone!!!!!!!!!!!!So today I have the next hatchling pack!!! DINOS! I tried to pick dinos for this one that I didn't see a lot of out there! I figured it would be more fun that way, and I'll likely do more dinos in future packs, so don't worry if you don't see your fave! Feel free to leave a

Andddddddddd here's the BABY Solar Dragon!! I hope you all enjoy! I've been liking releasing the Babies alongside the full size and I hope you all do too!!-Tracy FILAMENT and Tools: https://www.amazon.com/shop/cinderwing3dSingle Color: Epax3D Orange DawnMulticolor Light: HP3DF Glitter White, Ziro C

HEY EVERYONE!Today I have something long asked for! The SOLAR DRAGON! The Lunar Dragon is one of my most downloaded and loved models to this day and it was about time we had the other half! It comes winged and wingless and has a fun sun ray flexi tail!! Admin Jazzy painted up the 3mfs too! I can't

Hey everyone!!! Today I have for you the return of the TINY SPIDERS! Spooky season is upon us and I wanted to get a jump start on some new Tiny Spider for the fall! This pack has THREE! Say hi to the Autumn Leaf, Pinecone, and Dessert Tiny Spiders! Admin Jazzy painted up some 3MFs as well for these

Hello everyone and happy August!!!!!!!!!!Starting off this month with a cute little turtle! It's been a minute since I've made one and a mushroom was a natural choice with fall coming up! I can't wait for things to cool down a bit!This one has two version, a regular and a BIG CAP! Because mushroom

HEY EVERYONE!Finishing up this month with a pair of exclusives! We haven't had a Tiny Wolf Pup in a minute and I wanted to whip a few up! These friendly pups are VERY FLOPPY! This one as always was tested between 60-100% but will likely scale well!These will stay as EXCLUSIVES!Thank you all so much

HEY EVERYONE!!!So this one was a request from my MIL! She really wanted a lil piggy and I thought it would be SUPER adorable, so I went ahead and made it! This one features 3 different pigs, a winged, muddy, and regular! Paint jobs were done by Admin Jazzy! THEY CAN SIT UP! It's just so cute!This o

Hey Cinders!!!I was REALLY EXCITED for this one, so I went ahead and pushed it up in the schedule!!!! This pack features a Hippo, Crocodile, Flamingo, Zebra, Lions, and Giraffe! This pack will be free to download until the end of July 2025! Jazzy hand painted the Zebra stripes to really help make i

HEY CINDERS!This month's dragon is here! I was really feeling this one, so I got it done right away! I know a lot of people are going out camping and doing summer stuff so I thought this would be FUN!How do we feel about the Baby being release along with the full size because.... THE BABY IS RELEAS

Happy July Cinders!!!!Wanted to start the month off with something fun and summer-y so.... what's more summer than a SEA MONSTER!!! This is one of those releases I almost didn't release because I wasn't sure if you all would like it but it was just too funny not to!Because of its shape, I was able

Hey all! Last one for this month! As promised here is the next Hatchlings pack! This set will be a member exclusive! This time with summer coming up I decided to go with a nice sea critter theme!These are STRONG and they have a great WIGGLE! These were also tested down to 60% scale of the file size

Cinders! Hello! 🐱I am really excited for this one! I have really been enjoying the pop up neck style and these kitties are just so cute! Featuring both a winged and wingless version, the winged having the cutest little wings! Jazzy got a 3mf painted up as well! This dragon is a Supporter Exclusive

Hey Cinders!!!In my attempts to get caught up with all the Baby Dragons, today I bring you the Baby Koi Dragon! This one was a bit of fun because me and the testers tossed around giving these one 4 legs like the rest, or fins! As you can see, I ended up going with the fins and I think it's just so

HEY CINDERS!!Has anyone noticed that I'm taking this month to get caught up on the Baby Dragons? 🤣Today I have the BABY Snapdragon Dragon for you all! There are two versions of this, winged and wingless! This dragon is a Supporter Exclusive as will not be made public! Jazzy also painted up a 3mf f

Hi Cinders!!!!Today I have a SWEET TREAT for you! I've been getting a lot of suggestions for a 4th of July dragon and I was feeling a bit snacky so.... I baked us up a treat! Due to the 4th coming soon, I also wanted to do a little extra for everyone and go ahead and release the Baby version as wel

Hello Cinders!!!I got a flowery friend for you all today! Tester Kelcy was a bit of inspiration for this due to her love of deer and flowers haha! :) She was also the one who did the initial paint job for you all! This deer features multiple adjustments to accommodate those antlers in the form of l

Jazzy here! We hadn't planned to make an "official" statement but due to the influx of messages and questions.... here I am!There is a new creativity policy in place at Etsy. These new rules include 3D printed products. You can read more about it here. These rules are NEW, and I don’t know exactly

Hi Cinders!!!I really REALLY appreciate when y'all let me know what you want and this one was one more than a few of you were waiting on!!! It's TIME! Say hi to the Baby Steampunk Dragon! I had to rework the tail a little to make sure the gear still spins!-Tracy FILAMENT and Tools: https://www.amaz

Hey all! Today is something my kids requested!!! It's a bit simple and honestly, I debated even releasing them, but I really enjoy them and figured you all would as well! There is a both flexi and not flexi versions as well as two keychain options! They are pretty small (about 6g I think?) but shou

Hey all! Today I have for you a very cute COMMUNITY MOD by Tester Eli! The Discord is always up to some silly things and one day it was brought up that it would be really funny to make a Cowboy Crab, much like the Cowboy Frog! This rootin' tootin' crab will join its buddy as a Subscriber Exclusive!

Hey all! Jazzy here! Just wanted to do a quick little drop! I realized I could get some tadlings out despite everything going on so I figured this would be a fun way to sneak that 6th model in after all! Tester Eli was a big help in getting these tadlings up and ready to go, and Mod Silver helped w

Hi Cinders!Download here! For the finale this month, the regal Koi Dragon! This beautiful dragon has scales running down its entire length! This one has been requested for some time and Tracy finally got the feel for it, with summer coming up and all. She wanted to do something water themed!I spent

Download hereHi Cinders! Hey everyone! Due to Tracy having a little bit of a family emergency (everything is fine!) I'm here to get your last two releases for the month done! Starting with, as a few of you guessed.... the Tiny Hippogriff! A lot of you were really excited seeing a Hippogriff in the

Hi Cinders! Introducing a new line of designs called HATCHLINGS! These are the smallest scale designs that I've made and are meant to be printed tiny! I will be releasing these in Themed Packs over the months! I've had a ton of requests for models that can go smaller then my "Tiny" designs, so here

Download here!Hi Cinders! Have a pair of Tiny Ocean Dragons for you all in time for the warmer weather!! These cuties are joining the Tiny Dragon/Wyvern Collection! Hope you enjoy! Dragon and Wyvern Versions each with a .3MF Color file! -Tracy FILAMENT and Tools: https://www.amazon.com/shop/cinderw

Download here!Hi Cinders! Welcome to May!! Get ready for a fun month! Starting you all off with this adorable Highland Cows design! I made 2 versions: one with horns and one without. I've also included a 3.MF Color File for each! This design has the same new "snap up" neck that the Tiny Horse has,

Download here: https://than.gs/m/1323434Hi Cinders! I cant count the number of requests for these! I was going to release them next month but you all wanted them ASAP, so I just switched out for another model. I have included not only the 4 variations shown in the pictures (Unicorn, Unicorn Feather

Download here: https://than.gs/m/1320038Hi Cinders! Here is the SNAPDRAGON Dragon! I included both a winged and wingless version for variety printing! Like usual, these wings print attached, and then rotate and fan out after printing! Huge thank you to both Admin Jazzy and Cinderwing3D Tester Eli w

Hi Cinders! As stated in the Tiny Horse release post, I've been working on bringing you all a JUMBO version where the neck was easier to snap into place! - HERE IT IS! This is the essentially the same as the Tiny Horse except for a the neck piece designed for bigger prints. The original file (and i

Hi Cinders! Baby Peacock Dragon has landed! This cute design has THREE versions! While the adult was designed with only two versions, I did want to give this baby a version with 4 legs since there was room to! Also, like with most wings, these fan out and hold in place once printed! Hope you all en

Dear Cinderwing3D Community, We want to take a moment to address something that’s been weighing heavily on many of you. We've heard your concerns about the challenges of competing with cheap, mass-produced knockoffs flooding the market. We want you to know — we see it, we hear you, and we are not o

Hi Cinders! I have a fun Supporter Exclusive for you all! It's another adorable animal mash-up! Tested down to 40% with full articulation! I designed this print specifically with single-color in mind. Hope you all enjoy it! -TracyDOWNLOAD HERE: https://than.gs/m/1306390 FILAMENT and Tools: https://

Hi Cinders! Thank you all for being patient with this design! I am so excited to release this Tiny Horse to you all!Download here! Like the previous Tiny Deer design, the Tiny Horse neck prints in the down position and snaps up into place once printed. This allows for articulated head movement, mak

Hi Cinders! So happy to have you here for April! The first design of the month is our EXCLUSIVE Annual April Fool's Day Whatchamahoozit!   Like in previous years, you have to open the file to see it! - Our Test Team didn't even get to see this one!  And I have to say, it's the m

Hi Cinders! Who wants a Tiny Peacock!?   For the last design of the month I'm releasing this adorable Peacock! It's a quick print for single color, but because of all the colors and swaps, a 4-color print does take a quite a while. These were quite tedious to paint so huge THANK YOU

Download here: https://than.gs/m/1295918 Hi Cinders! It's been a great month and I've had a ton of fun designing and releasing a bunch of models to you all! I truly hope you've enjoyed what I've sent out so far! I set myself a pretty ambitious goal of giving you all 9 models this month, and I was f

Hi Cinders! Bringing you all the Tiny Bunny Dragon! So many of you have been asking for more Tiny Dragons for the Tiny Dragon/ Tiny Wyvern Collection and I thought this would be a cute little one for Easter coming up. It is decorated with eggs, spring themed feathers, and an adorable bunny face! Ho

Hi Cinders! I can't count the number of requests from people asking for an Easter themed spider! Bringing you all this cute simple design as a BONUS since it was not planned and was not counted as one of the original 8 designs. I really wanted to make this simple rendition special and included 2 fu

Hi Cinders!DOWNLOAD HERE! Being the Year of the Snake, I have a new snake for you all: the Crystal Snake! This is a completely new design with so much wiggle! It's really fun and looks great in many colors! And thank you Admin Jazzy for this incredible .3MF Paint File! Thank you! More to come! :) -

DOWNLOAD HERE!Hi Cinders! This TINY Flying serpent is joining the Tiny Dragon/ Tiny Wyvern Collection! - And thanks to Admin Jazzy, you all get an awesome .3MF file! Thank you Jazzy! Hope you all like it! As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" comes

DOWNLOAD HERE!Hi Cinders! Welcome to March 2025! Thank you all for being here and supporting me! I'm starting off the month with the BABY Fae Wolf Dragon, which is a baby version of the adult Fae Wolf Dragon released last year. There are 2 versions of this design: 1 with open pattern wings, and 1 w

Hi Cinders!DOWNLOAD HERE The final FEBRUARY 2025 design release is the Peacock Dragon! I LOVE this dragon! It has some striking features and an amazing tail! It also looks amazing in such a variety of colors! I think you all will have a lot of fun printing this one!! I personally LOVE the one

Hi Cinders!DOWNLOAD HERE Excited to release my new dinosaur design!  I made 2 head versions for both the popular Pterodactyl and the Nyctosaurus! Both are Pterosaurs which my kids call Flappy Dinos! I also included a .3mf color file for the Pterodactyl! Hope you all enjoy these! One more

Hi Cinders! Releasing the Baby Easter Cookie Dragon with it's adorable Easter egg themed cookies and icing scales! This is the BABY version of the Adult Easter Cookie Dragon that was just released this month!  ALSO with a .3MF Color File for you! Since the Adult was a Public Model, t

Download here! Hi Cinders! Bringing you all the BABY version of the Adult Gemstone Wyvern previously released in an earlier month. This Baby Dragon is an Exclusive and will not be made public! We also included a few .3MF Color files for fun! Hope you all like it! I find this new

Download here!Hi Cinders! This is an Easter Special! I only have a few of these Sugar Cookie Renditions planned, and with all the Holiday themed cookies, this one was on the list! This does NOT count as the big Cinder-Style Dragon for the month! - This is just a Holiday bonus! :) (Second pictu

Hi Cinders! This Tiny Clover Dragon has been patiently waiting to be added to the Tiny Dragon Collection!  I wanted to give it all to you in time for St. Patrick's Day! If you all want more of these tiny themed dragons please let me know below!Remember, you can also easily make this into

Hi Cinders! Like the Original Crystal Dragon, the Baby Version also needed updating. This is a release for the 2025 Remake for the BABY Crystal Dragon!  This design has the same updated links and crystals as the Adult 2025 Remake but while staying as close as possible to th

Download here: https://than.gs/m/1255542Hi Cinders! This is a really exciting design release for me! Bringing you all the Tiny Hummingbird! THIS IS ONE OF MY FAVORITE ANIMALS and I just had to make it! As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" come in

Hi Cinders! I really wanted to make a spinner for St. Patrick's Day!  It spins just like the Rose and Crystal Spinners. Admin Jazzy also made a simple .3MF file! Hope you all enjoy this! Remember, holes and loops for keychains and such are approved MODs! -Tracy FILAMENT and Tools: https:/

Hi Cinders! This is the 2025 Remake of the BABY Flying Serpent.  The 2025 Remake of the adult was released last month. Like the adult, the original Baby Flying Serpent had flaws that needed updating. This 2025 Version has new feathers, less overhangs, thicker feathers, and updated wi

Download here!Hi Cinders! I have one last Valentines design to give you all - THIS WAS NOT PLANNED! This is a Bonus MOD that was suggested by a supporter, and I took a few hours create it and see how I liked it. - Well, it's actually cute, so I have decided to release it to you all. I know it'

Hi Cinders! Like the 2025 Crystal Dragon, this is another 2025 Remake of the original Flying Serpent Design! The original design is so popular but has some flaws that have needed addressing. This 2025 Version is a COMPLETE remake with new feathers, less overhangs, thicker feathers, and updated

I can't believe it's been 3 years since my first design: the Crystal Dragon!Download here! Our StoryFor eight years, my husband and I dreamed of starting our own business. Our ultimate goal was to spend our lives together and with our family, free from the constraints of the traditional 9-to-5 grin

Hi Cinders! I thought it would be fun to make something kind of different for Valentines day! I had a certain skunk cartoon character in mind and also wanted to play off the phrase, "love stinks." This little guy is pretty cute though! I included a version with a rose and without (for more of a spr

YOU ALL KNEW THIS WAS COMING! Had to get it out ASAP for Valentines Day coming up! This is the BABY version of the Heart Cookie Dragon that was just released!  ALSO with a .3MF Color File for you! Since the Adult was an Exclusive, this baby will be made Public. COOKIE EGG! &nbsp

Hi Cinders! I really wanted to get this and the spinners out to you yesterday, but I really wasn't feeling well. I understand many of you need these out during the week to print for weekend fairs.   After the Gingerbread Dragon, MANY of you requested more "Sugar Cookie Dragons" with

Hi Cinders! This one might look familiar, but it is actually a complete remake! I previously released a Tiny Rose Wyvern but the roses were different. We heard many opinions of supporters wanting the original roses, and I decided to remake this in time for Valentines Day! :) I think these are so cu

Hi Cinders! Welcome to the New Year! I want to THANK YOU all so much for your support in this new month!! I'm so excited to have you here for January 2025! Since Valentines Day is coming up fast, I'm going to be trying to get the themed designs out first! Also check out the Spring Collection,

Download here!Hi Cinders! THIS ONE WAS FUN! I had HIGH EXPECTATIONS for my next dice tower. I wanted it to be Portable with dice storage, have amazing sound when the dice fall through it, have a longer "fall" time for more fun and sound, wanted it to hang so you could easily take it

Hi Cinders! I've been so excited waiting for this release!! Bringing you all a Tiny Skeleton T-rex PACK which not only includes a Tiny Skeleton T-rex but also 2 stand options and 2 Keychains!!! This Skeleton T-rex is one of the "Tiny" designs I've been working on which have bigger links to allow fo

Hi Cinders! I know it's too close to the Holidays for a lot of you who sell, but this BABY GINGERBREAD DRAGON was requested SO much and I got it out as soon as I could.  Please remember if you are looking for holiday designs, I do have a bunch from previous years that you can get way

Hi Cinders! Giving you all a Celestial Egg for the holidays!  This looks beautiful in single color Tri and Dual filaments!  Just a simple little design - more to come! :) Tracy FILAMENT and Tools: https://www.amazon.com/shop/cinderwing3d Ziro Citrus Breeze All my designs are pri

Hi Cinders! Bringing you all a cute little festive MISSILE TOAD, as a play off the popular holiday Mistletoe plant! This guy is a funny alternative to kiss under for the season, and also looks cute in the tree! This Missile Toad has the same body functionality as my Cinder Frog but has been co

Hi Cinders! Hope you all had a great holiday! I'm so excited to have you all here for DECEMBER 2024! This month is going to go a little differently! Since I have a few more models to release that are holiday themed, they will be releasing first in the month and as fast as we can possibly get t

Hi Cinders! This is the last release of November! I hope you all had a fun month with these 7 releases!! Please check the list in this post to make sure that you got them all! Bringing you all the GEMSTONE WYVERN!  This was a popular ask after the launch of the new wyvern body and wi

Hi Cinders! Sorry I'm a little late to the reindeer party! I AM SO HAPPY TO FINALLY RELEASE THIS DESIGN!!!  - TINY REINDEER!  It took some extra testing to be able to get you all the best version of this Reindeer that I could - and I'm so excited with how it turned out! My kids

Hi Cinders! The 4th and 5th Release of the month is double Supporter Exclusive! Baby Storm Dragons and Festive T-Rex!   These Baby Dragons have been waiting to be set free for a while! These are baby renditions from the bigger Strom Dragons released in June of this year. There is a winged

Hi Cinders! Bringing you all the festive Santa Turtle or "Santaurtle" I had fun making this one! It has a hat, belt, and even a beard! I know it's been a while since I released a turtle rendition and I wanted to bring this one to you for the Holidays! It looks great in multi-color so I painted up a

Hi Cinders! I hope you all are having a great month so far! The second design and the first of the winter themes for this month are a 3 Pack of SUPPORTER EXCLUSIVE Tiny Spiders! Designs Included in the 3 Pack: Bow Spider, Santa Spider, Snowflake Spider I am releasing these little MODS as some

Hi Cinders!Welcome to November 2024!DOWNLOAD MODEL HERE! I really excited to get into some winter models but I wanted to release this last Fall one first! I thought you all might like a cute Tiny Turkey for November! After the duck release, my kids have been going crazy for these bird-type models! I

Hi Cinders!Finally bringing you all a highly requested design! - The Steampunk Dragon! This dragon, being really technical, was a big challenge for me!  I first attempted it a couple years ago and I to put it down when I didn't like where it was going. I'm so excited I gave it another shot

Hi Cinders! The Wolf Spider! - This is a fun little spin on the recently released Tiny Wolf Pup! I've given this creature 8 spider legs, 8 spider eyes, and fangs! It's a mix of cute and creepy for this Halloween Season! The 100% is pretty big for a spider, so I have tested it down to 50%. Personally

Hi Cinders! I have something new for you all!  I thought it would be fun to make a Pumpkin Container to go with all the pumpkin creations I was making! This was a fast bonus design that I thought you all might like. Of course I couldn't stop there and decided to put a dragon face on it! I

Hi Cinders! Another Supporter Exclusive release! - The baby version of the new Pumpkin Wyvern from last month! This cutie is a new style of baby dragon specifically based off its adult wyvern version. It includes little wyvern wings off its front arms and the new wyvern back legs. Please let me know

Hi Cinders! Bringing you all the tiny WOLF PUP!  I love this little design and I'm so excited to give it to you!EDIT: Keychain version added! Recommended scale is 65%! This one was actually specially made for my daughter's Kindergarten class!  Her class sponsored an Iditarod sled

Hi Cinders! Happy October! I'm starting off this month releasing an exclusive, The Hollow Bat! Thank you for all the fun guesses from the Sneak Peak! - They gave me some great ideas for the future! ;) The Hollow Bat is a remake of the Original Tiny Bat design from August 2024. It is a Supporter Excl

Hi Cinders! Finally this month's Cinder-style Dragon is being released! Introducing the Pumpkin Wyvern!  This is a completely NEW body style that has some really fun features!  First, the fan wings print entirely in place! - no pop ins. All the fan style wings in the past have b

I have a new tiny model for you all! - 3 TINY SNAIL! As usual, I couldn't JUST make a tiny snail, I had to make variations as well! Bringing you all 3 variations in the spirit of the upcoming Holidays: Snail Skull Snail Pumpkin Snail These make great "Flushie" prints and can print REALLY tiny!&nbsp

Hi Cinders! This month's Baby Dragon release is the Baby Infested! This Baby Dragon has 4 variations to choose from (listed below) and thank you to Admin Jazzy you all have FOUR .3MF color files to go with them! Four Variations Included: Winged, Regular Tail Winged, Spinner Tail Wingl

Hi Cinders! I wanted to bring you all a fun new EGG VARIATION! - THE WEBBED EGG!  This Halloween themed egg looks great in BOTH multi color and single color! It matches the webs of the Wicked Dragons and Count Frogula!  It's also great for holding all those spider prints! I hope

Hi Cinders! I have several more designs planned for this month! I have a new style that's taking some time up so thank you for being patient with these releases! :) BONUS EXCLUSIVE DESIGN: Candy Spinners! We personally wanted these to give out for Trick-or-Treating! These fidget toys are perfect if

Hi Cinders! This Tiny Duck was a special request from someone in my family who love jeeps. This was not a planned model but I thought the community might like it as well and wanted to release it to you all anyways! Because of its shape, I was able to give it jumbo sized links compared to some of my

Hi Cinders! Welcome to SEPTEMBER!! Hang on - this month's going to be crazy! Starting you off with TWO more Tiny Spider Variations! These have become quite the collection and we had SO many submissions for these two variations after the last release! The Tiny Pumpkin Spider and the Tiny Hollow

So today, I have not one, but THREE RELEASES for you today to finish out August due to all the moving I am doing! 1/3: INFESTED DRAGON The Infested Dragon has been a beast planned for months! I wanted to make a Cinder-style Dragon that was unique, asymmetrical, and GROSS to release early for Hallowe

Hi Cinders! This Baby Dune Striker has been highly requested for some time now and I'm excited finally be releasing it! This is a BABY version based off the original Dune Striker Dragon model which was release a couple years ago! .3MF File Included Thanks to Cinderwing Tester, "Thor's Reign" Hope yo

Hi Cinders! So many of you have asked for a TINY BAT and I was so excited to make this model this year! I'm releasing it really early, so you all have some time to print it before Halloween! I specifically wanted to design a bat to lay flat in your hand and look like a little pet. These things are a

Hi Cinders! WELCOME TO AUGUST! ---> As most of you know, my family has been moving the last few weeks and things have been a little crazy. Thank you all for your patience and understanding! I finally have my desk set up and several fun models to release to you all! So excited for this month!! ===

Hi Cinders! There was a ton of ask for not only an alternative Unicorn Dragon but ALSO one with wings! This Alicorn Dragon is a mix of mane and feathers with a traditional spiral horn! Being an Alicorn Dragon, it does have wings - however I have included a wingless version for you all as well. :)You

Hi Cinders! BABY DRAGON RELEASE! Bringing you all the highly asked for BABY AXOLOTL DRAGONS! - These are a favorite of mine! With winged and wingless versions! Like the adult, these are entirely print in place with rotating and foldable wings - only baby sized! THANK YOU to Cinderwing

Hi Cinders! I have a new Wolf Dragon for you all!!! the FAE WOLF DRAGON!  The original Wolf Dragon had pop in wings, and by popular request, I have made this an all in one print with no pop-ins! Like all wings this style, simply rotate and fully extend the taller wing part out to hold them in p

Hi Cinders! I had plans to give you all a dragon today but a complication came up and we are fixing it! :) I'm giving you instead the next on our release, the Tiny Starfish, and the dragon will hopefully be out Sunday! There are two versions of this starfish and both are fun, easy, and fully articul

Hi Cinders! WELCOME TO JULY! So excited to have you all here this month! I am starting off July by giving you another fun summer model - the Tiny Squid! After the Tiny Octo, this one HAD to be done as well! The desert heat here has made pictures difficult, so these little guys decided to take a s

Hey everyone! First off thank you so SO much for this past June! It's been great getting set up here on Thangs and it's been wonderful working with everyone here! I have NEWS! Thangs just let us all know today that ANNUAL BILLING is now live! This means you can now subscribe for a full year, up fro

Hi Cinders! For the last release of June I'm bringing you all a TADLING PACK! These Tadlings are an Approved Community MOD made by Plague Doc! Thank you Plague Doc! Also Thank You to Silver (Crestie.Creations) for these amazing pictures, and to Admin Jazzy for the fun Keychain renditions! (All th

Hi Cinders! Releasing the Narwhal! Previously, I have made two other Narwhal inspired designs: the Flutterphin and Frostphin. I wanted to give you all a cute simple version for faster printing and smaller size! Hope you enjoy it! 🙂 These are Print-in-place with NO SUPPORTS! Tested between 60-100%

Hi Cinders! Releasing the STORM DRAGON! - with WINGED AND WINGLESS VERSIONS!! A stunning dragon decorated with lightning bolts! Admin Jazzy and I spent A LOT of time making coloring .3MF files for multi-color prints to really accent the features! I hope you all enjoy! These are Print-in-place with

Hi Cinders! Who's ready for a TINY OCTOPUS! I really wanted to make this cute design for summer! I hope you all enjoy! Below is the file list where I've included a few special ones! FILES INCLUDED: Blank Tiny Octo .3MF Color1 - Just the eyes .3MF Color2 - Rings and eyes (After the Blue-ringed Oct

Hi Everyone! I have a really cute and fun Exclusive for you all! The TINY T-REX! The first of a whole Tiny Dino Collection I'm really excited about! These are Print-in-place with NO SUPPORTS! Tested between 60-100% but can probably go smaller! 🙂 Admin Jazzy included a KEYCHAIN VERSION that can b

Last release of the month! - Unicorn Dragon! Hi Everyone!  It's been a fun month of models and I wanted to finish off with a Cinder-style Dragon for you all! This Unicorn Dragon rendition does have a couple pokey pieces, so I am working on a softer version as well that will be released in a la

Hi Everyone!! FINALLY!!!! Introducing the Great Stone Dragon! Thank you all for being patient this month! This guy was in testing for SO long. I really wanted to get the ball socket for the wings to hold and the front legs stronger before releasing it. Huge THANK YOU to Admin Jazzy and the m

Hi Everyone!! This is a 2-pack MEMBER EXCLUSIVE for you all! - Another one! The Tiny Crystal Spider and the Tiny Fairy Spider! These cute spiders are little redesigns from the original Tiny Spider, and part of the Tiny Spider Collection! They are also exclusives and will not be made publ

Thank you all for your patience while we got things set up! You can now subscribe here on Thangs! We have all the Subscriber Models up in a Collection so you can easily browse ALL the models you get for FREE when you join!You can use code THANGS1YEAR to get 50% off the first two months!Note you do

Hey everyone! My name is Tracy! Some of you may have heard of me before and if you have? Hi! Hello! Thank you for being here!If you haven't, I'm the maker of the Crystal Dragon and many others wonderful dragons and critters! I was invited to come to Thangs and decided that it was a lovely spot for