tracking pixel
SB

Hypercube Evolution Compact Dual 4010 Duct 2 with X Endstop

by
Boothy
Follow
Follow
Remix Model
Hypercube Evolution Compact Dual 4010 Duct 2 with X Endstop 3d model
Hypercube Evolution Compact Dual 4010 Duct 2 with X Endstop 3d model
2D
3D
Makes
Be the first to upload a Make
This model is restricted by licensing terms. 
0 Likes4 DownloadsOctober 18, 2021
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4245520.

There is newer thing\remix here: https://www.thingiverse.com/thing:4425580

This is a compact dual 4010 duct assembly for the Hypercube Evolution. My second version which includes a X optical endstop. 1.The overall width of this things is only 6 mm wider than the original Scott3d assembly so therefore should not offset too much build volume. The position of the X endstop adds to this making an overall reduction of approximately 10mm 3.The fan ducts are based generally on my recent Hydra Duct design. 4.The offsets for the BLTouch are x= 22 y= -37. There are two brackets, one allows for use with the provided springs. 5.This can be used in conjunction with my revised XY Joiners at this link: https://www.thingiverse.com/thing:4245532 6.The other components required can be found at the original thing here: https://www.thingiverse.com/thing:4222420

Useful Accessories:

I remixed this great thing by kulfuerst with a scallop in the right hand side to allow more clearance for the heater cables in some of my compact 4010 fan duct designs. I also included an additional amount of material to the top edge of the duct to provide some additional strength when clipping. It may be better to attach the fan prior to clipping to the heatsink has the fan fixings will reinforce the part I have found the additional clip enhancements for the Dragon provides improved grip to the V6 heat sink. I have not yet tested sufficiently to comment on the longevity of the part but if the fan is doing its job printing in PETG or stronger should be sufficient. https://www.thingiverse.com/thing:4426090

I have included a step file if anyone wants to use this has a base for their own design. Printed in Amazon Basics Red PETG on and Ender 3 Pro. M3 thermal inserts used: https://www.amazon.co.uk/gp/product/B07PMZCP23/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1


0 Likes4 DownloadsOctober 18, 2021




This model is restricted by licensing terms. 
0 Likes4 DownloadsOctober 18, 2021
This model is restricted by licensing terms.