Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2996518.

It's a remix of the excellent job done by Alderoth.

I haven't modified the logo and the letters of the name plate.

I only separate the different elements to facilitate the printing in several parts and several different colors.

I added small guides and cavities to adjust and glue the different elements on the base.


**You can print Part 1 upside down for better surface rendering.**

**You have to print Part 2 upside down because of insert bumps.**

Nameplate for Hypercube Evolution with logo (Multi Parts)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1841693.

These are plastic parts to hold up the T8 trapezoidal screws centered thanks to a 608ZZ ball bearing. 
These parts are suitable for version 2.01 of the p3steel frame and others if identical. Make sure of the shape of the metal parts.

*** UPDATE 2017-02-25 ***
Pictures of the realization (orballo variant version for me)


*** UPDATE 2016-11-09 ***

- Aesthetic revision (v1.01) of nuts holes (parallel alignments of the nut with the edge of the plastic piece).

- I made another specific version of the plastic parts for the variant of the z-top frame sold by Orballo Printing in Spain. This z-top is narrower and has some improvements including the holding screw of the Z rod thanks to a lateral screw.

Now, you have the choice to take the classic version or "Orballo" variant depending on your Z top.

BOM :
- 2 x 608ZZ
- 6 x screws CHC M3x16 DIN 912
- 6 x nut NYLSTOP M3 DIN 985
- 4 x printed plastic parts (ie left and right version) ** Update : take classic version or "Orballo variant"

P3Steel Top Lead screw holder with 608zz

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:752559.

These are modules of 10x10 cm and 15x15 cm square and angular that assemble among themselves to build the necessary grid system to the establishment of a plenum in the Jaubert's method of a reef aquarium.  

The height of the modules is 2 cm.  

Use filament which does not degrade in water and with food contact.

Plenum modules for Jaubert's Method for living reef aquariums

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3211776.

It's a fan grid for the front 40x40 mm fan. Enjoy.


40mm Fan Grid for the New Fanduct JGaurora A5X

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3755283.

It's a redesign of the CR10_E3DV6_MANUAL_BASE_V7.5.stl part from petsfang v2 (https://www.thingiverse.com/thing:2759439)

This new part fit the specific Funssor CR10(-S)/Ender replacement carriage available on aliexpress here https://www.aliexpress.com/item/32961475769.html

The hotend's mounting brackets are longer than the original creality model.

They are 5 mm long, which is why I redesigned this part.

The part has been redesigned from scratch because I do not have access to the creator source file. There may be some minor differences.



Funssor CR10(-S)/ENDER Carriage E3d6 Manual Base for Petsfang v2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2930952.

C'est un remix du corps de l'extruder l3kv2 adapté au chassis de la p3steel.
L'arrière de l'extruder ou le moteur pas à pas est fixé vient cogner dans le haut du chassis lors de l'impression des pièces plus hautes.

Cette version ajoute 5 mm à la base de fixation de l'extrudeur sur le chariot X ce qui permet d'éliminer le problème.

Il faut des vis CHC plus longs comme M4x35 compte tenu de la modification de l'épaisseur.

------------------------------------------------------

This is a remix of the body of the extruder l3kv2 adapted to the chassis of the p3steel.
The back of the extruder where the stepper motor is fixed knocks in the frame when printing parts quite high.

This version adds 5mm of thickness to the base of attachment of the extruder on the carriage X which allows the extruder does not hit the frame any more.


Need 4 longer screws like CHC M4x35.



L3KV2 Body for P3Steel Frame

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3707009.

It's a remixed **right-block** part for Bowden X-Carriage Mount for E3D v6 with 40mm Fan and BLTouch (https://www.thingiverse.com/thing:3098894) by Emphacy. Thanks to him.

This remixed part has fixing holes (4 mm diam.) spaced 23 x 23 mm in H and V. No more change.

23x23 holes spacing Right Block for AIR

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1469092.

This is the plastic base for my laser tag sensor (Laser Battle).

Project blog here : http://www.myhomefab.fr/category/laser-tag/
Project github repository here : https://github.com/myhomefab/laser-battle

The work is based on this model of acrylic dome found here : http://www.ema-models.co.uk/index.php/acrylic-plastic-shapes/hemispherical-domes/clear-domes/hemispherical-head-44-5mm.html



Laser Tag sensor base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2949226.

A share of my cosmetic variation of the panel caps for the FDL-2X Blaster https://www.thingiverse.com/thing:2556255 from JesseKovarovics.

New Panel Caps for FDL-2X

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2205074.

This is a remix of the slug trap from AlexEnglish (http://www.thingiverse.com/thing:23467)

<b>Improvements: new mushroom-shaped design and 3 eyelets in order to anchor the trap on the ground in case of strong wind.</b>

This is a slug trap for killing slugs in the garden. Print (body in white beige and hat in red for example). Take a beer. You can drink it a little before :-) and fill about 2/3 the way full. Put the hat on, and place in the garden.

Slugs will be out more when it's raining or has recently rained; the hat helps the water run off so the rain won't dilute the beer and make the trap ineffective.

Mushroom slug trap / Piège à  limaces Champignon

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3500889.

This is a sieve for seed potting soil.

- bottom square ~ 20 cm
- top square ~ 25 cm
- height 12.5 cm
- mesh 4 mm
- 4 handles

Addition : new simple model M size (square bottom 162 mm / top 186 mm, height 50 mm, round mesh pattern 4 mm diameter, 2 handles).



C'est un tamis pour terreau de semis

- base carrée de ~ 20 cm
- carré de ~ 25 cm en haut
- hauteur de 12.5 cm
- maille de 4 mm
- 4 poignées

Ajout : un nouveau modèle simple en taille moyenne (carré base 162 mm / haut 186 mm, hauteur 50 mm, maille circulaire de 4 mm, 2 poignées).

Sieves / Tamis

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3682663.

It's a simple 40x40mm fan grid for the Jgaurora A5X mod.

A5X name inside.

40x40mm Fan Grid A5X Name

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3222505.

Original models lacked faces (https://www.thingiverse.com/thing:341543).
These have been repaired so that Simplify3d (or others slicers) can slice them without any problems.

Plug Protect Baby - Cache Prise Electrique (fixed faces)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3136589.

English :

It's a rack shelf mount 19" size 1U to place a modem.The object is printable in three parts and must be assembled with screws M3*10 and washers on each side. The slotted holes allow a shelf adaptability to small differences in widths of 19 "racks.


French :

C'est une étagère pour rack 19" taille 1U pour placer un modem comme la Freebox par exemple. L'objet est imprimable en trois parties et doit être assemblé avec des vis M3*10 et des rondelles de chaque côté.

Les trous oblongs permettent une adaptabilité de l'étagère aux petites différences de largeurs des racks 19" du marché.



19" 1U Rack Mount Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2318364.

This is my official maker coin with my logo.
I use it to test the new filaments to know their ideal printing temperature, etc... So I note the good print data on the back with a pencil to remind me.

My Home Fab maker coin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3701623.

It's a remixed part from the JGAurora A5X Bondtech mount by seaspotter https://www.thingiverse.com/thing:3259649

I improved the part so that we can mount the original sensor runout.

A PTFE tube is required between the entrance of the Bondtech BMG and the output of the Runout sensor.

Insert the PTFE tube into the BMG and cut the length flush (see picture) and then install the runout sensor.

There is also a support to attach the braided wire sleeve on the side with holes for zip ties.


*** Printed and tested sucessfully 2019/06/20 ***

JGAurora A5X Bondtech and Runout Sensor Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3012400.

I remixed some parts that I share.

- new main tube (need x 1)
- new lever & rettler (assembled in one piece) (neesd x 3) - cut the little attach part after print.
- new stands (front x 1 & back x 1)
- new shaft with specific head for new rotor blades holder (need x 1)
- new blades holder (need x 1)
- new shaft spacers (need x 4)
- new shaft terminal (need x 1)

You need m3 CHC screws.

Thanks to the original author for creating this object.

Missing parts are on the original author post : https://www.thingiverse.com/thing:950635

Vidéo : https://www.youtube.com/watch?v=JOD7Qrfx-CU&t=14s

Birds Scarer - Effaroucheur oiseaux (Tic Tic Tic)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2936717.

This the angular magwell grip from the FDL-2V adapted for the Customization Pack (FDL-CP) you can found here https://www.thingiverse.com/thing:2818310


FDL-2V Magwell Grip Ribbed for Customization Pack (FDL-CP)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

xfifi79