Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2875481.
Update:29\04\18 The adapter workjed in a fashion but the set tolerence still allowed water through the O ring. I doubt if the part would stand more than afew hours in current design from - the weak area being the original JCB nozzle design. The rotatary head of my Aldi lance is constantly sticking and will be going into the bin so therefore I doubt if I will test\develope this Thing any further.
Adapter for JCB (Model:JCB-PW9TSS)Jet Washer to Aldi WorkZone Jet Washer, I designed this specifically for the Aldi Workzone Patio Lance\Cleaning Attachment.
The print should be printed horizontally to maximise strength. I have printed with PETG, with 50% infill and 8 perimeters.
The spacer is to insert at the JCB end after the bayonet is connected to help take some of the load from the JCB male connector tube which seems to be the weakest part of the component. This is not essential it may just take some of the load when levered at the end of the lance.
You will need the original spring from a Work Zone\Aldi fitting and an O ring from one of the JCB or similar fittings.
This is WIP - I have not tested on the Jet Washer yet. I will update after testing.