Create a small breathing space for 60mm wide labels

T-Slot_Spacer_Zebra ZD410.3mf

T-Slot_stamps.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3009873.

Oh yea, Its a Thug`s life!
Thug glasses.
Scale to fit.

I HIGHLY recommend you lightly sandpaper the inside of the glasses.
Then run water over and wash off.
It's no fun getting filament stuck in your eye!


Try print the spliff in spiral mode in cura.
AND dont try take off bed with hands. use a scraper to bottom ;)

update 31/08/18
made a spliff, joint...etc..

update: 29/07/18
I made the sides of the "glasses" slightly thicker.  v1.1





Thug Glasses + spliff

Cluedo weapons game pieces.  

I thought id get them on thingiverse :-)  I didn't find any....
So I set about designing my own :)  They are simple objects thankfully.  Although the rope was a bit...err ropey.

CLUEDO WEAPONS GAME PIECES

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3906433.

Some of the tweezers can be extremely pointy.  I seem to lose these clear caps easy.....

Simple tweezers cap. 

Cura : Enable Bridge Settings [Experimental]

100% infill

.2 or .1  (only a small print)


Tweezers Cap Protection

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3914337.

Spooky skeletons.
I used flexible filament.

Skeleton Buntings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3959400.

I designed this to store my fit ring away.
I stuck it behind the TV. 

I just used double sided tape but I also made some holes 100mm apart to fit a vesa mount if that was an option for you.

Standard print. No supports needed.

Ring Fit Holder

Rio Statue (Christ the Redeemer)

Updated the model. Some tweaks to the thickness of some areas.
Be sure to enable supports.

Christ the Redeemer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3630773.

New AnPost logo....

Printed using two filaments.
I turned the Ironing feature on in Cura.  It did a great job on surface layers.

Just used some waterproof double-sided tape to stick to box.  Finally break/snip off supporting sprus

Post box sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2838941.

The shelf I designed goes perfectly with the Malm design.  Minimal and functional.  This two level shelf is very strong and fitting exactly.
The lower shelf has slot for a charging cable to slot into.  upper shelf has a recessed rim.
In darkness you can feel where to place an item.

Its designed so it can be placed on either side of bed.  No left or right version ;)
Please upload your printed version. Id love to see.  Hopefully it prints well for you!!

UPDATE:
I decided to do a left and right  with 1 cable slot on the back.  Another version without any cable slot.
You can chose yourself what version you want to print.
Put a fillet on more parts of the shelfs


Ikea Malm Bed - minimal side shelf.

After seeing some great designs on thingiverse and other model sites, I set about trying to design one myself.  
I want to learn Fusion 360....and who doesn't love Elephants..Right ?

You can see from the pictures I started with pen and paper just drawing out different elephant shapes.
I wanted the print to be printed without any supports.  I modified the trunk to be part of the legs. The tail also comes out just enough to see its a tail.

UPDATE: 
13/06/2018: Added another modified model called Stylish elephant v02
Adjusted the curve on head area. You can see the eyes from the front now.  Which I think is a lot cooler :) 
Adjusted tail thickness slightly.



Stylish Elephant

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3881421.

To store your Nintendo game cartridges near your console.  4up.

Nintendo Switch Game cartridge holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3894493.

Stand alone - Sydney Opera House.  A silhouette illustration piece.
Length is about 155mm

Sydney Opera House silhouette

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3149324.

Enchanted Fairy Door and Window.
Can be scaled to suit. Door height is about 115mm

Change filament during print for Door handle and hinges then for bricks frame colours.

The model was a lot thicker when I printed this example. 
I reduced the thickness to save on time and filament. Will test this and also included a version with small holes to aid in permanently fixing to wall or whatever. Have not tested this version yet.

TIPS FOR CHANGING FILAMENT DURING A PRINT
Your layers might be different to mine so check them first.
For the Door object...Pause at layer 9 and layer 29; if you want to have 3 different colours.
For example Brown first. Then pause at layer 9. Change filament to Silver. Finally at layer 29 pause and change filament to another colour of choice (would be the bricks and entrance).

For the Window object....Pause at layer 5 and put window frame filament colour in.

I use Cura from <a href="https://ultimaker.com/en/products/ultimaker-cura-software">Ultimaker</a>.
In Cura, you can add these layer pauses. 
Goto Menu/Extensions/Post Processing/Modify G-Code.
Add a script. 
Pause at Height. 
Drop down the first Option -Pause at height. Change to layer. Then key in next option the layer height.
Click Close or Add a Script if you need another layer change.
MOST important tip if you do this.....Turn these off after you save your gcode....or it will go onto all future objects you save to print!! :-O

On my Anycubic i3 MEGA, The pause g-code mod works. I just wasn't sure how to resume! I changed filament then switched OFF the printer. Switched back on and went into Resume print and selected the print i was doing.. It continued the last print!! Sweet!

If your using OctoPrint...Then simply click to resume, when you have changed the filament.


Other options are to just manually pause it from the screen as its printing......

Definitely interested in what your print turned out like?

Enchanted Fairy Door & Window

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2977296.

https://youtu.be/GlywsWTN1Tk
A great classic game you can 3D print!  Great for a gift.
Get 4 of your colours in a row. Any angle.
I hope you enjoy this print.  It should be easy enough to print.  
Do not use supports (lengthy clean up if you do:)

I encourage you to design your own discs!  
The diameter is 18mm and thickness is 2mm
21 for each player.

I recommend you print on a raft for the Slots object.

When finished print..There might be light stringing.  You may need to encourage the discs to fall.  This goes after a couple of plays.

If you can post a print you did of it, that would be great.

Connect 4 Travel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2768271.

Cisco 1800 Series Integrated Services Routers
The award-winning 1800 Series is ideal for small to midsize businesses and branch offices.

Are you tired of trying to hook your router onto the back of a screw!!
If so... You need the Wall Mount Brackets!....Make life easy...

A simple 2 piece (half height) wall mount bracket for this office/corporate router.
Let us know if you found the parts useful.

This will also hold the 890 series routers.

Update 18/7/18
Made slightly shorter versions.
Where these routers are installed there is not much room.  This shorter bracket means I can (hopefully) slot router in easier. :)

Cisco router 1800 series wall mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2811443.

Make a snowman and put these prints on to make Olaf from the film FROZEN.  Add a carrot for the nose :)

Olaf Snowman face parts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4255244.

A smiley stand appropriate for this machine :)


Behringer TD-3 Smiley Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3401592.

A sturdy base to seat your DJI Osmo Pocket.  Stops it falling over when doing time-lapses :)

Osmo Pocket Wide Base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3196234.

This picture is the elephant printed at 50% scale

Stylish Elephant 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3166636.

Print as many as you like... Grab a piece of string.  Stick/Hang them up on a wall or window...Done ;)

Scale some to give variation....

2 different expressions.  Evil and happy.

Pumpkin Buntings

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2829424.

My simple lens cap.


Xiaomi Mijia 4k camera lens cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2700675.

Idea was to hold up Christmas lights cabling on gutters outside house. put double sided tape on back and stick.  obviously clean surface maybe with a solvent.
Actually very happy with this quick design!...  It works!! very functional.

Ill add some pics of that done.
I guess these can be used for anything.  keep things tidy is the main goal ;-)


Underside Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4232493.

Inspired by other Pi 3 designs, I created this TV box for the raspberry Pi4.  

*Install libreelec and you got a media station :)*

No supports needed.
Enable combing. -Not in Skin.

 Raspberry Pi4 TV Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2811568.

Snowman stormtrooper face parts.
Make a cool stormtrooper from your snowman :)


Stormtrooper snoman face part

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3542256.

A simple spice rack. Holds 4 spices.  Diameter for spice is 45mm
I buy my herbs n spices in Lidl and Aldi.

I printed it at .3 with support on.

Spice Rack

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4184535.

A SIRUI_TY-C10 Tripod Mount

Did a slight modification since this initial print in pictures.  Removed the two outer slots. Widened part of middle slot to make fixing screw go in easier.

SIRUI_TY-C10 quick release Tripod Mount

This 3D printing is great.  I try to use Fusion360 to do some designs.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

ME3D