I recently got an Aldi 10" bandsaw, the dust port it came with didn't fit my hoses.

I use 32mm ID hoses. This port tapers down to 31mm so I can just push a hose on there whenever I use it.

The cad model was just built from primitives so really easy for you to change if you want different dimensions to suit your hoses.

Thangs won't let me upload the FreeCAD model. It's also on Thingiverse.

aldi bandsaw dust port.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2083622.

The dust tube was just a bit too big for the vacuum hoses I use, so this one is tapered so a wider range of tube sizes will fit (including my own).

I've uploaded the Freecad file too.

update: oops linked to the wrong cyclone - correct one linked now :)

Cyclone separator dust tube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4737636.

Magazine for the EK Archery Cobra 80. Holds 7 bolts, I've used both the plastic and aluminium bolts without issue.

You'll need some M2.5, M3 and M4 nuts and bolts, a length (6"/150mm) of 6mm aluminium rod and a suitable 8mmx20mm ish spring. Reuse the screw which held the original picatinny rail in place to secure the rear of the magazine. A second picatinny rail can be printed for a foregrip, you'll need to source some imperial machine screws that fit the body of the bow to attach it though.

A drill guide for the rod is included - drill the holes in the rod with a 2.5mm drill. You might want to file a hook into the end of the rod to prevent cocking when empty.

The safety needs to be removed (drift out the pin that holds it in place) and the trigger cover put into the slot to fill the hole and stop the bolts from moving back too far and jamming, it also takes a lot of the slop out of the trigger mechanism. I've added a photo of how it fits (printed in silver).

You need a reasonable sized bed to fit the magazine on as it prints in one piece.

Additional fasteners required:
Front mounting:
1 x M4x40 button head screw
1 x M4 nut

Rear picatinny rail:
2 x M4x12 countersink screws

Lever assembly:
2 x M2.5x12 button head screws
2 x M2.5 nuts
3 x M3x12 button head screws
3 x M3 nyloc nuts
1 x M3x20 button head screw
1 x M3 nut

Update: Added an extended picatinny rail so both a foregrip and laser can be used.

Designed in FreeCAD.

EK Archery Cobra 80 Magazine

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2291664.

The depth locking part on my aldi router failed so I created this. It's 9mm across the flats.

A deliberately very tight fit, once it's on the bolt it won't come off. pull the bolt into the hole by tightening the screw which goes into the top of the bolt.

FreeCAD file attached too as usual.

aldi router adjustment knob

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3414546.

I liked the slim case, but recently needed a case with supports for a 3.5" touchscreen (http://www.lcdwiki.com/3.5inch_RPi_Display) which fits snug and flush.

FreeCAD file included.

Alternative case top for 3.5" screen

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5022171.

Basic fairly stiff jazz pick. Prints well in PLA,I used the ironing feature in cura which makes it nice and grippy, benefits from a light scuffing on the bottom too if you've got a shiny bed.

I've included the freecad file so you can modify it to your hearts content.

Jazz pick

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2144861.

It's just a stand for my MiPad2.

Printed with 20% infill.

As always FreeCAD file is included.

MiPad2 stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2249317.

My table saw has a 40mm OD outlet for dust collection. This adapts it to the same taper as my adapter for the cyclone separator 34mm OD down to 29.5mm OD over 50mm.

Mine was printed in PLA, 0.2mm layer height, no supports and with a 5mm brim on my Anet A8. It's a nice snug fit.

As always FreeCAD file is here as well as the stl.

40mm to taper adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2136849.

A simple candle holder/base the hole is 23mm diameter

candle holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2191851.

The table insert on my band saw finally went south, so I printed a replacement. It fits better than the original.

Ryobi EBW2523 bandsaw table insert

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2191856.

The door fasteners on my bandsaw failed a while ago. These replace the plastic parts that failed. Simply re-use the original bolts. I had to hammer them through so the knurled section of the bolt fits in the hole. They're much more solid than the originals and I don't see them failing again in the life of the saw.

Ryobi EBW2523 bandsaw cover fastener

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

doobedoobedo