**Print-in-Place “Welcome/Go Away” Word Swap Sign** The words on this sign change from “Welcome” to “Go Away” when you turn the knob. **Printing** The sign is 34mm tall x 185mm long with 21mm high letters. It prints-in-place with no supports. To get the color change I did a filament swap at layer 10, 16, and 21, with .2mm layer heights and 6 top layers. For two colors swap at 10 and 21. **Mounting** There are desk and door mounting brackets that slides onto the sign from an end and stay in place with a friction fit. There are two mounting holes for screws, or you can use these [Command strips](https://amzn.to/37pH4a8) (aff.) to attach it to the door. **Filament** [Second to None Silver HTPLA]( https://www.proto-pasta.com/products/second-to-none-silver-htpla?aff=113) (aff.) and [3D Fuel Yellow]( https://www.3dfuel.com/collections/175spla/products/ingeo-pla-daffodil-yellow-1-75mm) Printed on the [Mulcore]( https://github.com/3dprintingworld/Mulcore). ___ **Support and Licensing** If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)