Ezra Bridger’s 3rd lightsaber Multi-Part Version with Saber Plug

This is the first Saber Plug compatible collapsing lightsaber! This is a print-in-place spring-loaded cap that is printed separately to retain the blades when not in use. The cap positivity locks onto a groove on the ID of the hilt.

This multi-part design of Ezra’s lightsaber is split into different stl's so it can be printed in full color with a single color printer and some manual filament swaps. There is a screw on cap, so the blades can be printed separately in different colors and inserted or replaced.

There are locators or the parts nest into each other making it easy to assemble. I used Starbond Medium CA Glue (aff.) You will need a multi color printer only to get the red and green buttons on the control panel, and the screws on the emitter. The matrix can be printed in black and gold with a filament swap, then glued to the control panel.

For best results use a .4mm nozzle for the blades. You can print the blades all at once or one at a time in vase mode. Find detailed instructions on how to print collapsing swords on my website.

Printed on the Prusa XL(aff.) with Polymaker Metallic Pro PLA