Shinobu's Collapsing Sword Multi-Part Version

The cap on the replaceable blade version of this sword is not glued on but is removable by squeezing its sides, the blades then can be printed separately and inserted or replaced.

The multi-part version of the sword has been broken down to different parts so they can be printed separately in different colors and assembled. The print-in-place versions print complete with the blade.

There are six versions of this sword:

• Print-in-Place Single Color
• Print-in-Place Multi-Color (requires a MMU, AMS, IDEX, or Toolchanger)
• Replaceable Blade Multi-Color (requires a MMU, AMS, IDEX, or Toolchanger)
• Replaceable Blade Single Color Multi-Part
• Replaceable Blade Single Extruder Multi-Part(Pictured)

Supports are not required, for best results use a .4mm nozzle. You can print the blades all at once concentrically or one at a time in vase mode. Find detailed instructions on how to print collapsing swords on my website.

Assembled with Starbond Medium CA Glue (aff.)

Printed on the Prusa XL(aff.) with Polymaker Metallic Pro PLA