Gridfinity Nippers + Strippers + Pliers Racks

Nipper Holder x6.stl

Gift Box #7 Print-in-Place

GIFT BOX 7_ASSY_REF ONLY.stl

Minifinity  |  Gridfinity Drawers Baseplate

Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.

Are you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!

Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.

P.S. This is really dumb, don't waste your resin on my flights of fancy.

Gift Box #7

GIFT BOX 7_ASSY REF ONLY.stl

Stackable Lego inspired Storage Box

Stackable Lego Storage Box print plate.stl

3D Print: One Can Cooler

12oz Cooler Complete.STEP

Gridfinity Toolbox (Parametric)

Plate.stl

Gridfinity Blank Blocks

1x1 Block 1.25in.stl

Gridfinity 2x2 Three-Bay Nipper, Stripper, Plier Rack

At the risk of having my nerd card revoked, I'll admit that I just don't need space for 6 nippers, strippers, and/or pliers. 

Rather than waste space with unused bins, I chopped Zack's original file down into this 2x2 Three-Bay Rack!

#Gridfinity

Gift Box #1  Print-In-Place 

GIFT BOX-ASSY.stl

#gridfinity Vase Mode Single Box

Vase Mode Single Cell.stl

Collapsible Basket 

This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket!

Here is my Amazon Affiliate Link to the Hatchbox Gold PLA Filament I used to make the basket :
https://amzn.to/2DikMq3

My assistant demonstrates how easy it is to take a freshly printed basket off the printer and unfold it.
https://youtu.be/7OAqEXW8H-k


Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

Umbrella in a Rain Shower Artwork

Umbrella Art Complete.stl

Gridfinity Kitchen Drawer Organizers (Collection)

Gridfinity 3x6 Cutlery Holder 2x.stl

Gridfinity Templates for Fusion360 (updated 18.03.23)

Easy to use Fusion360 Gridfinity Templates

Also available on my Github: https://github.com/KptnAutismus/KptnAutismus

Gridfinity Templates (Filled in and Hollow) for Fusion360

Master Sword Test Print

This is the test print for the collapsing Master sword.  Its  24mm high so what I do is  change retraction setting every 8mm.  Then I compare the changes until I achieve the best result. Each printer is going to be different but in my case  for this blade I used a negative “extra restart” distance to reduce the size of the layer seam. 

If the three pieces are completely separate you should have a successful print. 

MASTER SWORD TEST PRINT

Gift Box #1

Gift Box #6 Print-in-Place

GIFT BOX 6 PNP-ASSY REF ONLY.stl

Gridfinity AA Battery Holder

An extension of #GridFinity by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

A standard 2x2x3 AA Battery holder. Holds 25, with convenient tapers to allow the batteries to slide in easily. I made sure to add a bit of extra space as rechargeable batteries are often thicker than standard.

#Gridfinity Holder-2x2x3-25AABatteries

rectangle

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Nippers + Strippers + Pliers Racks

Gift Box #7 Print-in-Place

Minifinity | Gridfinity Drawers Baseplate

Gift Box #7

Stackable Lego inspired Storage Box

3D Print: One Can Cooler

Gridfinity Toolbox (Parametric)

Gridfinity Blank Blocks

Gridfinity 2x2 Three-Bay Nipper, Stripper, Plier Rack

Gift Box #1 Print-In-Place

#gridfinity Vase Mode Single Box

Collapsible Basket

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Umbrella in a Rain Shower Artwork

Gridfinity Kitchen Drawer Organizers (Collection)

Gridfinity Templates for Fusion360 (updated 18.03.23)

Master Sword Test Print

Gift Box #1

Gift Box #6 Print-in-Place

Gridfinity AA Battery Holder