Miniature Book Box [Draft]

bookbox_05.stl

IKEA VAPPEBY to Fleximount Monitor Mount Adaptor

VAPPEBY_fleximount.stl

Print in place handle with a hinge .stl

simple handle with a hinge. Print the whole thing then remove the brim and bend the handle a few times to loosen the hinge. It prints already assembled and is suprisingly smooth and sturdy. The rotational range is about 210 degrees. I added only a few supports for the elevated flat parts. Print at low infill with thicker walls depending on the expected load. The hinge is very strong and it hardly flexes when being twisted. for addidtional strength, two machine screws and nuts can be slid into the holes in the hinge. Tolerances in the hinge are pretty high so it should print well on most printers. It can be down-scaled within reason if needed.

I printed mine with black PLA at 50C Bed and 195C nozzle with 100% cooling to better handle the overhangs
the hinge is very squeaky but the noise gets reduced the more the hinge is used, a little bit of thick lubricant can be added to mitigate the issue

The "Emergency" Button!

Press.STL

Mailbox Indicator Flap // Spider

Spider_Shorter.stl

(Snap) Coffin Shaped Box (Skull)

(Snap) Coffin Shaped Box (Skull).stl

Auxetic Table (beta) // 68x88mm 4x5 Stacked

Auxetic Rectangles 68x88mm 4x5 stack Table .stl

Decorative box hinged

Coinbox with key lock

CoinboxWithKey-Lock.stl

Hinges

LEFT.3mf

Mailbox Indicator Flap // Raccoon

Raccoon_C_Black.stl

Heart Shaped Box (Snap)(hearts engraved)

Heart Shaped Box (Snap)(hearts engraved).stl

(Snap) Coffin Shaped Box (Cross)

(Snap) Coffin Shaped Box (Cross).stl

HEART SHAPED BOX (print in place)

300123-01-000-HEART SHAPED BOX (lip).3mf

Storage Container Organizer Boxes with Snap Lock in 4 Sizes

Print_in_Place_Box_45x75x20.STL

Dragon Bust Accessory Stand - Moveable Jaw Version

Dragon Controller Holder - MoveableJaw - Project.3mf

Replacement Ryobi Deadbolt and Lockset Installation Kit

RepairAutoStrikeLocator v2.stl

Square Strawberry Cake Container

Pixeleena_Square Strawberry Cake Container.3mf

P1P Top Lid Mod for ARC Enclosure

ARC Lid Support.3mf

Mailbox Indicator Flap // Fuschia Flower

Fuschia_C_DeepPurple_shorter.stl

hinge

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Miniature Book Box [Draft]

IKEA VAPPEBY to Fleximount Monitor Mount Adaptor

Print in place handle with a hinge .stl

The "Emergency" Button!

Mailbox Indicator Flap // Spider

(Snap) Coffin Shaped Box (Skull)

Auxetic Table (beta) // 68x88mm 4x5 Stacked

Decorative box hinged

Coinbox with key lock

Hinges

Mailbox Indicator Flap // Raccoon

Heart Shaped Box (Snap)(hearts engraved)

(Snap) Coffin Shaped Box (Cross)

HEART SHAPED BOX (print in place)

Storage Container Organizer Boxes with Snap Lock in 4 Sizes

Dragon Bust Accessory Stand - Moveable Jaw Version

Replacement Ryobi Deadbolt and Lockset Installation Kit

Square Strawberry Cake Container

P1P Top Lid Mod for ARC Enclosure

Mailbox Indicator Flap // Fuschia Flower