sink dishes

sink dish 180x138mm.stl

Lenovo Thinkpad T460 keycap

Remixed from [Lenovo Legion Y720/520 keycap](https://www.thingiverse.com/thing:4617181)

Rotom - P1P form

The P1P 3D printer seems to be attracting Rotom all over the world. Many sightings have occured over the past two months. Users have reported their 3D printers to be the fastest they havev evver used. Might this be Rotom's fault?

Print this model in full colour using your AMS system. Lay the eyes flat to the bed so you can achieve a nice surface finish.
You might need to manually adjust the border to snap on the printer by trimming or sanding.
Combine it with Bambulab's red case and you will have a full Rotom P1P.

Next Up! Arcade Game Queue Quarters Holder

Tree Icons 00C4, nestable box (v2)

AVENGERS 3D PRINTABLE KEYCHAIN PORTFOLIO

Baby_Groot_Keychain.stl

AlfaRC Grasshopper GPS Mount - HGLRC M80 Pro

Remixed from https://www.thingiverse.com/thing:5485056/files

Takina Lycoris M&P 9 Pistol

Gridfinity Logitech G815 Baseplate

2x7 baseplate for the Logitech g815

Probably works with any 800 series keyboard, but i don't have any

Spiral Vase Rose With modular Stem

PTFE Tube Clamp for Prusa MMU

Hardware
Socket Head Cap Screw M3x10
Hex Nut M3

Model is created in Soldiworks with multiple bodies to easily assign colors to the numbers.

PTFE Tube Clamp for Prusa MMu

Prototype: 3D Printed HOT SWAP Mechanical keyboard.

Dinosaur Icon 0047, nestable box (v2)

3d-printer tom v1.3mf

Cable Holders

cable holder 6 mm.stl

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes  #ThangsBambuContest

SpinCycle_DefaultJar.stl

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

[See Description] Under Desk Magic Keyboard & Trackpad Mount Mk-I

magic underdesk rail right.stl

3D Printable Extruded Layer Pot with embellished 3D printing layers

Fluffy Hearts LESS-THAN SIGN, nestable box (v3)

computer peripherals

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

sink dishes

Lenovo Thinkpad T460 keycap

Rotom - P1P form

View 13 new models

Tree Icons 00C4, nestable box (v2)

AVENGERS 3D PRINTABLE KEYCHAIN PORTFOLIO

AlfaRC Grasshopper GPS Mount - HGLRC M80 Pro

Takina Lycoris M&P 9 Pistol

View 14 new models

Spiral Vase Rose With modular Stem

PTFE Tube Clamp for Prusa MMU

Prototype: 3D Printed HOT SWAP Mechanical keyboard.

View 193 new models

3d-printer tom v1.3mf

Cable Holders

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes #ThangsBambuContest

ZigZag Christmas Ornament

[See Description] Under Desk Magic Keyboard & Trackpad Mount Mk-I

3D Printable Extruded Layer Pot with embellished 3D printing layers

View 468 new models