🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘

Calibration Cube_ICPI.stl

🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘𝙖𝙡𝙞𝙗𝙧𝙖𝙩𝙞𝙤𝙣 𝙘𝙪𝙗𝙚 🎲

My own version of the popular model used to test out printing tolerances, surface quality and to tune up your slicing profiles for every filament change.

This 20mm calibration cube has almost everything you need to check before actually start your prints: overhangs, bridging, retraction, ghosting, stringing, etc.

You can enjoy making it and have an actual cool, original and good-looking cube!

Join the #𝙞𝙘𝙖𝙣𝙥𝙧𝙞𝙣𝙩𝙞𝙩 challenge , show up your printed cube!

Happy printing everyone! 🎲

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy, share your make and be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.𝙞𝙩 in your socials!

⸻⸻⸻⸻⸻⸻⸻⸻

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Hinged Calibration Cube Accessories 01

agepbiz_cube_tounge.stl

Social Media Calibration Cube - Flex your precision!

Calibration_Cube_Social_Medias_V1.step

Hinged Calibration Cube Accessories 02

not-printable.stl

XYZ Calibration Test - Vase Mode

Quick 10 minute print - 0.3 m of filament

Don't waste your precious time and filament printing a so called “calibration cube”!

This quick print provides clues for all the important features and settings:

Extrusion width
E-steps / rotation distance (X, Y, Z)
Bridging
Cooling
Overhangs
Speed / accelleration
First layer / bed adhesion
Retraction (stringing test, seam test)
Preassure advance / linear advance
Print Settings
1 perimeter
0.2 mm layer hight
3 bottom layers
Disable “Ensure vertical shell thickness” (PrusaSlicer)
No Infill, top layers, brim or supports

**Troubleshooting**
https://www.reddit.com/r/3Dprinting/wiki/troubleshootingandcalibration

Some quick tipps:

_**Extrusion width**_
Check if the thickness of one of the outside walls at the top matches the setting in your silcer
**_E-steps / rotation distance (X, Y, Z)_**
If the outside dimensions are not 20 mm but way off, correct the settings for the affected axis
**_Bridging / cooling_**
If the bridging perimeters in the top center are drooping/sagging, check cooling an bridging settings in your slicer
45° overhangs
If the perimeters in this section are drooping/sagging, check the part cooling and cooling settings in your slicer
**_Speed / accelleration_**
ringing, bulged corners - you may want to reduce speed and/or accelleration (also see Preassure advance / linear advance)
**_First layer / bed adhesion_**
If there are problems with the print adhering to the bed, check if
- the bed is level and parallel to the x-axis
- the bed is clean - no dirt or grease
- the bed temperature is correct
If the print is wider at the bottom (first few layers) than at the top, check your z-offset and first layer settings
**_Retraction (stringing test)_**
If you experience stringing, check your retraction and cooling settings
**_Preassure advance / linear advance_**
If large seam gaps or bulged corners appear, consider tuning your printer firmware settings for preassure advance (Marlin) / linear advance (Klipper)

XYZ Calibration Test

XYZ_CallibrationCube.stl

This is a small and simple XYZ calibration cube for checking the dimensional accuracy of your printer.   The cube has X, Y and Z written along their respective axes.

Once printed either use an accurate ruler or callipers to measure the dimensions of the print. The original model size is 20mm*20mm*20mm however you may wish to resize it to be bigger (or smaller). 

Once you have measured your dimensions you may want to adjust the steps or steps per mm for each axis in your printers firmware - This may or may not be possible depending on your printer. 

To do this you will need to find your current Steps per mm, and then have your observed dimension and expected dimension.

To calculate the new Steps per mm you will need to do:

(Expected/Observed)*Current Steps per mm = New Steps per mm

It is also good as just giving a gauge of how well your 3D printer works with small over hangs and flat faces to check for Z-Banding or ghosting!

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Mood Mate - Spacesuit - Faces 2.stl

Easy Torture test -Torture Cube

This is a very easy very simple torture test to see the dimensional accuracy of your print and also slightly test your overhangs!!
This is a small ornate "cube" which can be printed in about 30-50mins depending on your settings.
I print one with faces parallel to the axes and then another at a 45 degree angle to test the diagonals of the printer.


artillery cali cube - Printer Giveaway 

I’ve teamed up with artillery3d to give away a brand new artillery hornet, all you have to do is to print this artillery calibration cube or this [rocket ](https://thangs.com/mythangs/file/119795?source=mythangs)ship , show me a video of it on tiktok using the hashtag #artillery3d, and I’ll pick a winner in two weeks, also you must be following artillery on their official tiktok account. GOOD LUCK.

Artillery3d official [tiktok](https://www.tiktok.com/@artillery3dofficial) account
My [TikTok ](https://www.tiktok.com/@pressprint?is_from_webapp=1&sender_device=pc)account.

My [Instagram ](https://www.instagram.com/pressprint__/?hl=fr)account.

the giveaway is hosted on tiktok only


--------------------------------------------------------


**printing settings**
scaling: at least 80%
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: no 




----------------------------------------------------------


this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_



-----------------------------------------------

happy printing.

GUCCI Calibration cube

This is a calibration test cube for your 3D printer with the GUCCI logo on it 



**printing settings**
scaling: at least 100%
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: no




this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing

Calibration Fool

Looking for an April Fool’s Day post? Print and post to social media… be sure to tag (and blame!) all your favourite 3D printer and filament brands. Use hashtag #calibrationfool 
See here for video: https://youtube.com/shorts/ii4bMlS8C14 


Frikarte3D XYZ Calibration Cube Plus

Frikarte3D XYZ Calibration Cube Plus.stl

cute calibration cube 

Cute calibration cube
its 20mm by 20mm by 20mm 

Tripod Cube.stl

Just another boring calibration cube that is 20x20mm with X - Y - Z extruded.  Has Tripod's Garage on the bottom.  What?  Were you expecting something exciting?

Calibration Cube

Calibration Cube.stl

Voron Design Cube Pen Holder

A pen holder based on the Voron Design calibration cube.

Horizontal Expansion Calibration Figures

Hole horzontal Expansion - 5 - 10 - 8.stl

The Oh the Horror Cube

Testlement

Testlements are small, simple test prints that are great for showing off your filament collection. (Named after their likeness to battlements and being test prints) Testlements are designed to use only a few grams of filament, making them economical and eco-friendly. They are also easy to print, requiring no supports or rafts. You can print Testlements in different sizes, colors, and materials, mix and match them, and even pop them together in groups (as shown in pics). 
Testlements are fun and useful test prints that let you test your 3D printer settings and showcase your filament choices. (Making them Great for showcasing filament choices for prints on places like Etsy) Try them today and see how they can transform your 3D printing experience.

Calibration Measurements:
20 mm wide and long (at its largest points)
22 mm tall

Print Settings:
.1 mm layer height
no supports


calibration cube

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Calibration Cube_ICPI.stl

Hinged Calibration Cube Accessories 01

Social Media Calibration Cube - Flex your precision!

Hinged Calibration Cube Accessories 02

XYZ Calibration Test - Vase Mode

XYZ_CallibrationCube.stl

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Easy Torture test -Torture Cube

artillery cali cube - Printer Giveaway

GUCCI Calibration cube

Calibration Fool

Frikarte3D XYZ Calibration Cube Plus

cute calibration cube

Tripod Cube.stl

Calibration Cube

Voron Design Cube Pen Holder

Horizontal Expansion Calibration Figures

The Oh the Horror Cube

Testlement

Slay the Horrific Cubimal!