Stretchy Spiral Square 02

StretchySpiralSquare_02.stl

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Print-in-Place DSLR Lens Cap (43->95mm)

58mm.STL

Ancient Dragon Book & Tablet Display

Ancient Dragon Book Display.3mf

Mini Christmas Dragon Keychain

MiniMonster#1SANTAhatKeychain.stl

Scooby | Supportless

100_Scooby_PIXELandPLASTIC_RM.3mf

Gymnastic Rings (Exercise, Gym, Climbing, Crossfit, etc.)

32mmRing.stl

Santa's Sleigh Flatpack

sleigh_flatprint.stl

Dragon - Centipede (Dragonipede)

CENTIDRAGON.stl

MiniMonster3BabySharkColored.3mf

Coathanger S-Hook

S_Hook_35mm.stl

Hidden Message Easter Egg

This Easter Egg appears plain at first glance but pop a light inside or behind it and see the pictures and secret message shine through! 

Very straightforward print, just set infill to 100% to make sure the infill pattern doesn't show - no need for supports!

Teabag Ferris Wheel (The Teabagger) - Easy to print - Easy to assemble

TeaBaggerWheel_X2.stl

Pickle Tickle

Pickle TickleR1.stl

EZPZ Pegboard Hook // 10mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

*FREEBIE* SKEWBITS Problem 023 (v2)

023.stl

Moss Planter 170x150mm

MossPlanter170x150_Planter_Bambu.3mf

Tall bowl/pot - intricate facets

Easy to print bowl - no need for supports etc.

Recommended settings:
- 2 perimeters
- 2 bottom layers
- 0 top layers 
- 0% infill

Origami Inspired Tree Ornament #4

Origami Inspired Tree Ornament #4.stl

Simple Grasshopper Flexi

grasshopper.stl

Support Free

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Stretchy Spiral Square 02

EZPZ Pegboard Hook // 10mm Hook

Print-in-Place DSLR Lens Cap (43->95mm)

Ancient Dragon Book & Tablet Display

Mini Christmas Dragon Keychain

Scooby | Supportless

Gymnastic Rings (Exercise, Gym, Climbing, Crossfit, etc.)

Santa's Sleigh Flatpack

Dragon - Centipede (Dragonipede)

MiniMonster3BabySharkColored.3mf

Coathanger S-Hook

Hidden Message Easter Egg

Teabag Ferris Wheel (The Teabagger) - Easy to print - Easy to assemble

Pickle Tickle

EZPZ Pegboard Hook // 10mm Reinforced Hook

FREEBIE SKEWBITS Problem 023 (v2)

Moss Planter 170x150mm

Tall bowl/pot - intricate facets

Origami Inspired Tree Ornament #4

Simple Grasshopper Flexi