Brightmourne

Earth Brown.stl

Goddess of the land Can Cozy Dice Tower

Goddess of the land.stl

Emberfang

Ash Grey.stl

Strider’s Elven Knife – Knife Kit | No Supports, No AMS, No Glue

Blade - Fossil Grey.stl

Inazuma

EZPZ Pegboard Hook // 20mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

SPIRALIS Pot 001

SPIRALIS_001.stl

Solaron Prime

Regalis Prime

Army Purple - Duel Saber.stl

Earthrender

Mint Green.stl

Verdant Eclipse

Howling Wolf Book Nook

Howling WOLF.stl

Aokiba

Sapphire Blue.stl

SKEWBITS v2.0 Puzzle Game // Full Set w. Problems 001-050

bit_A_red.stl

Invictus - Sword Kit (No AMS, No Support, No Glue)

Frostbite

Army Blue.stl

Pirate Hook – Prop Kit (No AMS, No Support, No Glue)

Silk Gold.stl

SIMPLE RHINOCEROS FLEXI

FlexiRhinoSimple.stl

Skyborn

Muted Blue.stl

Tippi Tree Stacking Game

Take turns stacking Leaves on top of your **Tippi Tree**, but don't let it topple! The aim of the game is simple, but you'll find that every round can offer new challenges and surprises. This stacking game features a unique S-shaped Leaf piece that connects to other Leaves in over 60 different ways, so every Tippi Tree grows differently. That makes this game fun and challenging for anyone from age 6 to 106. Great for parties, family nights, desk distractions, and a fantastic gift! 

---
 

**Tippi Tree** is an original game designed for 3D printing. Easy to PRINT & PLAY!

---

This download includes all the parts necessary to build your Tippi Trees:

- Tippi Tree

- Branch

- Tall Trunk

- Short Trunk

- Leaf

Plus bonus parts:

- Test piece

- Tiny Tippi Tree

- Alternate Styles (Blocky and Dual)

- Printable Logo!

- **& MANY MORE** (see updates below)

 

You'll also get PDF instructions for printing and playing:

- Game Manual (printable PDF color and B&W) 

- Printing Guide (printable PDF color and B&W)

I hope you find these instructions thorough and enjoyable! 

 
---

**_General Printing Instructions_**

- All parts print at 11% infill, 2-3 shells, 5 top and bottom layers with a standard 0.4mm nozzle. No supports required.

- PLA suggested but not required. Photos show leaves printed with [MatterHackers PRO PLA](https://bit.ly/PRO-PLA)

- For more details + troubleshooting, please refer to the included Printing Guide


---

**_Update History_**

**Dec 14 2020 Update:**

- Added Tiny Leaf V2 that fits way better than the original
- Added Game Manual translations for German, Spanish, and Italian (thanks Marcel F., Valentín G, and Giovanni L. for volunteer translations)

**February 10 2021 Update:**

- Added Tiki Tree Skin (based on winning competition entry by Jen Day and Bill Drastel)
- Added Leaky Hydrant Skin (based on winning competition entry by René von Koolwijk)
- Added Birds & Berries
- Added Experimental Leaves, Trunks, Branches
- Added Split Tippi Tree Base
- Added Tipmas Tree Puzzle
- Added Belt Printer Version for Leaf (no chamfer on leading edge)
- Added Game Manual translations for Swedish and French (thanks to Thomas H, and Jules S for volunteer translations)
- Removed square version of the manual and printing guide to simplify things

**October 26 2021 Update:**

- Improved fit of Tiny Branch models

**November 30 2021 Update:**

- Added 'Split Tree' version of the Tiki Tree [~/02.Printing Files/02.Extras/05.Tree Skins/01.Tiki Tree (Concept by Jen Day and Bill Drastal)/Tiki Tree_Split Tree Version.stl]

**May 07 2022 Update:**

- Added 'Tiny Berry' files [~/02.Printing Files/02. Extras/02.Tiny/Tiny Berry/...]
More birds! Added Baby Bird, Bluebird, Cockatoo, Finch, and Sparrow [~/02.Printing Files/02.Extras/06.Bonus Bits/01.Birds/...]
**July 25 2022 Update:**

- Added split version of Tiny Tree [~/02.Printing Files/02.Extras/02.Tiny/Tiny_Tree_Split_A.stl + _B.stl]

Tippi Tree // Original Tabletop Stacking Game

Support Free

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Brightmourne

Goddess of the land Can Cozy Dice Tower

Emberfang

Strider’s Elven Knife – Knife Kit | No Supports, No AMS, No Glue

Inazuma

EZPZ Pegboard Hook // 20mm Reinforced Hook

SPIRALIS Pot 001

Solaron Prime

Regalis Prime

Earthrender

Verdant Eclipse

Howling Wolf Book Nook

Aokiba

SKEWBITS v2.0 Puzzle Game // Full Set w. Problems 001-050

Invictus - Sword Kit (No AMS, No Support, No Glue)

Frostbite

Pirate Hook – Prop Kit (No AMS, No Support, No Glue)

SIMPLE RHINOCEROS FLEXI

Skyborn

Tippi Tree Stacking Game