Spiral Bowl (Support Free)

An easy to print, decorative bowl.

No supports are needed for this model - you shouldn't need a brim or anything else either! 

EZPZ Pegboard Hook // 20mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Deadpool Katana | No AMS, No Support, No Glue

Deadpool Katana 3MF (For Bambu Printers).3mf

EZPZ Pegboard Hook // 25mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Simple Rocket Print in Place

About as simple as it gets, no supports required! Fun and easy print that can be scaled to your hearts desire!

Knight’s Hammer Kit | No AMS, No Support, No Glue

Silk Gold.stl

PLEIADES Tealight // Tall

Tealight 0.8 vase Tall.stl

Force Field Puzzle 3x3 Wireframe Cube

17.stl

Soulbound Bookend

Soulbound Bookend (Left).stl

Springo Santa Hat

SantaHatSpringoComb.stl

Force Field Puzzle 3x3 Solid Cube

27.stl

Tippi Jack-O'-Lantern (Alternate)

Tippi_JackOLantern2.stl

Candy Cane Dagger – Dagger Kit (No AMS, No Support, No Glue)

Lava Red.stl

Skull Castle Can Holder | No AMS, No Support, No Glue

Muted Green.stl

See No Evil Frog

OnlyFrogs_006.3mf

Mushroom Man Container With Lid - Support Free

MusrhoomManBottom.stl

Bubble Trays / Coasters

BubbleTrayRaisedSpiral.stl

The Garden Goddess: Support-free planter with water catch tray

The Garden Goddess.stl

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Ancient Dragon Book & Tablet Display

Ancient Dragon Book Display.3mf

Support Free

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Spiral Bowl (Support Free)

EZPZ Pegboard Hook // 20mm Hook

Deadpool Katana | No AMS, No Support, No Glue

EZPZ Pegboard Hook // 25mm Hook

Simple Rocket Print in Place

Knight’s Hammer Kit | No AMS, No Support, No Glue

PLEIADES Tealight // Tall

Force Field Puzzle 3x3 Wireframe Cube

Soulbound Bookend

Springo Santa Hat

Force Field Puzzle 3x3 Solid Cube

Tippi Jack-O'-Lantern (Alternate)

Candy Cane Dagger – Dagger Kit (No AMS, No Support, No Glue)

Skull Castle Can Holder | No AMS, No Support, No Glue

See No Evil Frog

Mushroom Man Container With Lid - Support Free

Bubble Trays / Coasters

The Garden Goddess: Support-free planter with water catch tray

EZPZ Pegboard Hook // 10mm Hook

Ancient Dragon Book & Tablet Display