China soldering iron wall mount

This fits my cheapo china soldering iron (the one from the second picture taken direct from ebay seller listing cause f u I lazy)

PRINT HOWEVER U FACN WANNA PRINT I AINT YA MOMMA SO I AINT GUNNA TELL U HOW TO DO SHITE FIGURE IT OUT LIKE A BIG KID

Dewalt Soldering Station

Dewalt Soldering Station Top.stl

Magnetic PCB/Circuit Board Clamp

PCB Clamp Base.stl

GridFinityPinHeaderSolderingAid.stl

Gridfinity Soldersucker Holder 22mm OD.3mf

Soldersucker holder for a 22mm OD Soldersucker and a 7mm OD tip

T18 tip station

T18 tip station v6.stl

Weller ET soldering tip organizer (~5.5mm base )

# **Soldering Tip Organizer**
Inner hole diameter is 6mm, holes extend ~18mm. Will hold any tips that fit those dimensions accounting for shrinkage with your printer/filament.

**Infill is required to support internal geometry.**
7% Line infill using Cura worked well for me.

Easy Soldering Stand For Raspberry Pi 3 & 4 - (Resin)

**Easy Soldering Stand For Raspberry Pi 3 & 4 - (Resin)**

**Soldering stand**, to keep the pieces **in place**, while having both **hands free** to **concentrate** on the soldering task.

This soldering aid is **one** of the product of DIYBlender.com.

If you **support us** on [Kickstarter](https://www.kickstarter.com/projects/diyblender/diy-blender-casing-and-tools), we will be able to 
**release** all the current **versions**, extend the **variations** and **combinations**,
**implement** other **SBC**'s and even **customize** them for anybody **on-demand**.




For more casing examples, visit [**here**](https://www.diyblender.com/).
For more pictures, visit [**here**](https://albumizr.com/skins/bandana/index.php?key=Mkrc#1).

TS100 Soldering Station Setup

Station de soudage.3mf

Soldering wire stand (Print in place)

Really proud of this one. Soldering wire stand with print in place hinge and metal shaft slid into a hole. supports most sizes of soldering wire spools, many spools can be installed at once. If you want to access the spools, just lift the metal shaft up. If a small wire spool is installed, there is always more room for insulation tape, scotch tape etc
it works incredibly smoothly and is very strong. the bottom of the stand is corrugated so it grips nicely to a rough desk but there are also round holes for rubber pads.
The middle section has all the main lead exposure health hazards noted down for when you'll inevitably forget about them from all the lead fumes you have been inhaling. The sides have tin and lead elements decals.

_The model is supposed to be printed laying down with the hinge's shaft touching the build plate. The orientation here is very important so that the hinge works properly. I printed mine with .6mm nozzle at .14mm layer height and 10% infill. it's very strong and the letters & decals and perfectly readable. No brim and only one support for the shaft slot on the left side.
After printing, a ~10cm long, 10mm wide shaft is supposed to be pushed into the hole above the hinge. If you dont have a metal shaft, you can always 3d print one though it wont look as neat._

Articulating Arms Helping hands bracket

this is a design made to hold a small helping hands base over a workpiece with articulating arms attached to a swivel over a workbench. It is helpful when soldering on delicate equipment where the base may scratch the surface or be in the way.

Weller WLBRK12

Battery powered soldering iron with top-cover.

Soldering

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

China soldering iron wall mount

Dewalt Soldering Station

Magnetic PCB/Circuit Board Clamp

GridFinityPinHeaderSolderingAid.stl

Gridfinity Soldersucker Holder 22mm OD.3mf

T18 tip station

Weller ET soldering tip organizer (~5.5mm base )

Easy Soldering Stand For Raspberry Pi 3 & 4 - (Resin)

TS100 Soldering Station Setup

Soldering wire stand (Print in place)

Articulating Arms Helping hands bracket

Weller WLBRK12

Modular SMD Storage Plates - Stackable