Articulating Arms Helping hands bracket

this is a design made to hold a small helping hands base over a workpiece with articulating arms attached to a swivel over a workbench. It is helpful when soldering on delicate equipment where the base may scratch the surface or be in the way.

Resistance Training Handle

I made these for a friend that wanted a cheap and comfortable handle for resistance bands. The idea was intended to use a 1/2" conduit piece around 5" long  with these bushings on either end, and a braided nylon strap ran through the center. The strap was sewn together with a loop for a carabiner which attaches to a resistance band. the conduit would otherwise cut the braided strap without this bushing. This handle can be used with any type of resistance you decide to hook on the carabiner (weights, bands, cables, etc).

I hope someone else finds this useful. 

Happy printing!

Break away push pin anchor

Push Pin Shear Anchor flange

Boom light mount Bracket.stl

I designed a mounting bracket that attaches a Braun work light to the multifunction arm system created by RostaP. Its simple, allows for rotation of light fixture, and makes use of the original thumb screw. The hole is sized for an m6 heatset threaded insert, and securely fastens the light to the end of a boom for perfect lighting on your workpiece. While this is kind of a unique set up, I hope someone else finds this useful as well. I designed this to be printed as the model is oriented, and used some snug supports for the bridging on the light mounting surface.

This was designed to work along with the other accessories found here: https://www.printables.com/model/165239-multifunction-arm-mounting-system

Pipe Mounted Swivel Bracket for Adjustable boom

Light boom Pipe Mount Swivel.stl

drain cover and strainer

I was tired of cleaning the trap in a sink with no drain plug. All sorts of things get dropped in by accident, not to mention the multitude of hairs. This plug went through 3 revisions to allow decent drainage, while keeping the majority of debris from being sucked into the void. My drain was 1 ¼" with a taper after the opening, the tightest tolerance is not necessary here, so there is a slight amount of room to spare. The actual insert to the drain measures 30mm. 

Also included is the gcode which I used, It is set up for overture white PETG, and has reasonably  removable supports.

I do recommend printing this PETG for resilience and cleaning sake, and printing it upside down to minimized supports. 

Rpi 4b Cannakit Case holder and wall mount 

I made this to hold the cannakit case, it was my first raspberry pi project, and the kit was the right price with everything include, except one problem- where to put it?  This case holder fits snug on the cannakit case so it wont fall out by accident, but allows access to all the ports for cables and wires, while using minimal filament, and it matches my fancy printer. It is designed to mount to a wall or in my case the outside of my enclosure, which gets quite hot when printing PC, and causes thermal throttling.

Enjoy, and Happy printing!

Rpi 4b Case 30mm Fan with heated inserts

pi4b mount with inserts.stl

Remix of Dryer door magnetic Holder

I was being slightly lazy with a bad back and a free printer, so I whipped up a design to hold the dryer door open while doing laundry. I printed it with some PETG remnants because I dont like to be wasteful, so don't mind the multicolored part haha. I designed this to use a single trace on the upright portion so it does not need supports around the magnet holes. It had a big flat surface just screaming for a logo, so I obliged.

It uses (7) 12mmx3mm magnets, and seems like it will do the trick.

I hope others find this useful!

Happy printing!

Dryer door magnetic Holder

Glasses Replacement Nose Cushion

glasses nose cushion v1.3.stl

Sliding Closet door bottom stabilizer v2

This model was created for a set of closet doors which slide past each other, hanging from an overhead track. Someone had cut the bottoms of the doors off to accommodate new flooring, so no off the shelf guides worked. I hope that someone finds this useful!

Happy Printing!

Closet door stabilizer v2

thumb screw.stl

Bolt that held the fixed end of a clamp was toast, as well as the plastic caps which housed them. This new set up allows for the easy removal and reversal of the clamp so that it can be used differently. 

I used a 3/8" carriage bolt, and a matching nut: https://www.mcmaster.com/bolts/carriage-bolts-4/thread-size~3-8-16/length~1-3-4/material~steel/finish~zinc-plated/fastener-strength-grade-class~grade-2/

happy printing!

Lion's Head Ornate Palace Handle

This model is a small handle with a lion's head on either end to make it look regal. I designed this to be used with m4x6x6 heated inserts. As you can see from the pictures it is just large enough to get a few fingers through. 

Happy printing!

Antique Doll House Foot

This item was fairly unique, in that it was a copy of an existing antique doll house foot to repair/replace on which had been broken. It was printed with Amolen walnut PLA, and I have included the settings I used in a .3mf project file. It was interesting to me that this wood filled PLA can be stained and sanded like regular wood, and even smells like wood!

Good luck, and Happy Printing!

Work bench speed clamp

Speed Nut2.stl

Work Bench Friction Clamp

work bench clamp (18mm).stl

Gridfinity module for Diamond Files

I must give credit to @Trackzero (https://www.printables.com/model/244748-gridfinity-diamond-needle-file-set/comments/981154) for the inspiration for this model. I resized the holes to 5.2mm to fit my tools, and there are now 12 holes. This uses a 1x1 gridfinity space. Hopefully someone else finds this useful as well.

Happy Printing!

1/2" Pipe Clamp mount.stl

This is a simple but stable pipe clamp that can be color coded for the type of utility being held. It is sized for 1/2" copper pipe, and requires a couple bolts/screws of your choosing to hold it in place. I saw a flat surface, so I just had to add the Brainfuse logo.

Happy Printing!

06 honda civic hubcap

This model was designed to fit an '06 honda civic with aluminum wheels. This cap covers the CV shaft nut at the center of the wheel. I printed this standing on it's edge to give the tabs the much needed strength for compliance, it snaps into place just like the original would. Of course I had to put my logo in the center, it looked so plain with nothing else there!

Happy Printing!

Sunlu Filament Dehydrator PTFE Connection 

Dehydrator ptfe Filanut V2.stl

Sunlu Dehydrator flex Plug

This is a replacement Flex plug for the SUNLU filament dehydrator system.  It came with a tiny, easy to lose plug which almost immediately gets lost upon use. I designed this to be bright and obvious, have a moderate seal and be easy to grab. I do recommend printing this in TPU with some supports through the middle.

Enjoy, and Happy Printing!

Gridfinity Noga Bearing Scraper.stl

This model is designed to fit two NOGA carbide bearing scrapers, and a single porcelain blade scraper. It holds them upright in a handy position for use at your workstation while providing little to no resistance when grabbing the tool to prevent tipping the module over.

Gridfinity Screwdriver Holder

Screwdriver Top Mod-3.stl

Gridfinity Exacto or Scalpel holder

This model is designed to hold an exacto knife, some people call them hobby knives, or scalpels. Whatever it is, its handy to clean up prints and supports so this model keeps it nearby the workstation. It has a space for a spare blades case, as well as an empty slot for used blades. 

Happy Printing!

Gridfinity card scrapers.stl

This model is made to hold a set of card scrapers, and to work with the open source gridfinity organization and workflow project. It fits snug on this scraper kit: https://a.co/d/hB3mVd7 
the burnishing tool is not something to be used daily, so I left it out to be stored elsewhere.

Gridfinity Kaiweets Multimeter KM100

This is a 2x3 gridfinity module, made to hold the Kaiweets KM100 multimeter. It has space to organize the cables while leaving them plugged in, and an extra storage slot that I used for alligator leads. 

Thanks to Zack for the open source Gridfinity project. 

Happy Printing!

Kaiweets Multimeter gridfinity.stl

Dehydrator ptfe Filaspacer V2.stl

Unifying the ideas of the client and the designer to bring custom designs to life, using strict quality standards with a global conscience.

Niftyfixits

Achievements

Seedling

Up and Coming

Explorer