Framing system for 3D printed wall art that you find on my page.
Easyprint 3mf file is set up with modifiers for straight forward printing.

3D Painting Frame and Hanger System

Frame and Hanger.3mf

I have a bunch of 12V 2A DC inverters and I wanted to convert some of them from wall warts to inline inverters. So, I wanted to create a wall plug model to hold the prongs and install the wires.

Prongs can be heat pressed into slots in face plate. Prints fine at 0.2mm layer height with a 0.6mm nozzle and minimal support structure, if any.

WARNING: AC mains voltage can kill. Please do not mess around with it unless you know your local electrical codes and are certain you know exactly what you're doing.

Inspired by: https://free3d.com/3d-model/nema-5-15-male-plug-v1--938680.html

Nema 5-15 Plug

Nema 5-15 Plug Body.stl

If you are like me and you have the UniTak3D belt tensioner for your Ender 3 and a Logitech C270 webcam, here is a mount for it that fits the X-Axis.

Tensioner here: https://www.amazon.com/gp/product/B08F9MGNVC
Inspired by https://www.thingiverse.com/thing:4852861

Logitech c270 mount v5.3mf

Logitech c270 mount v5.stl

I have a foodsaver vacuum sealer and some zwilling vacuum bags and containers and I wanted to be able to use the foodsaver with the zwilling containers so I made up these adapters. Smaller one works for the containers and the larger works for the bags. Meant to be printed in TPU. Will probably require some post-processing to sand and melt the bottom edge for a better seal. I recommend sanding the sealing edge at 320 grit until rough texture, passing a torch over it to remelt, and then pressing onto a smooth surface to remold the edges so they seal better.

I printed with TPU 98A 15% infill, no supports.

Foodsaver Vacuum Hose to Zwilling Adapters

Bags_Foodsaver_Zwilling_Adapter.stl

I wasn't happy that I couldn't see the type of tweezers I was grabbing with the bin topper tweezer holder I made, so I created this stand as an alternative. 

Holds 12 pairs of tweezers.
Tweezer slots are 11.5mm x 1.8mm and stand 65mm off the base plate. 
Parts simply press fit, feel free to use a little glue if they come out undersized. 

I printed at 0.12mm layer height with no support and 15% infill. I don't think there would be any problem with 0.2mm or 0.3mm layer height or 10% infill.

Gridfinity 1x2 Tweezer Stand

1x2 Stand Tweezer Topper v1.stl

Designed to snap fit into a 1x2 Gridfinity hollow bin. Has 10 11mm x 11.5mm holes to loosely hold 10 different pairs of tweezers. Tested working with these bins: https://www.printables.com/model/321606-gridfinity-plain-bin

Gridfinity 1x2 Tweezer Holder Bin Cover

Gridfinity 1x2 Tweezer Holder Bin Cover.stl

Remix of Gridfinity module for Diamond Files by Niftyfixits. I added Press fit magnets and increased the size of the holes to 6mm.

Gridfinity 1x1x5u Holder for Diamond Files w/Press Fit Magnets

I must give credit to @Trackzero (https://www.printables.com/model/244748-gridfinity-diamond-needle-file-set/comments/981154) for the inspiration for this model. I resized the holes to 5.2mm to fit my tools, and there are now 12 holes. This uses a 1x1 gridfinity space. Hopefully someone else finds this useful as well.

Happy Printing!

Gridfinity module for Diamond Files

1x2 Mini Screwdriver Holder for Gridfinity. 3 tiers of height, holes are 4mm in diameter spaced 14.5mm on center and 14mm deep. Bottom has holes for magnets which have a very tight press fit: if you use a harder filament like PLA-CF, you might need a dab of acetone to soften the material to get them to press fit in. Hight of highest tier is 7u (49mm).

Gridfinity 1x2 Mini Screwdriver Holder 7u

Gridfinity 1x2 Mini Screwdriver Holder 7u.stl

Hi! I'm Pepsis and I make things out of plastic. I mostly model gridfinity and 3D paintings. If you like what I do, consider trying out a membership so you can get access to my monthly creations!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

FormosaHobbies

Achievements

Seedling

Trailblazer