Gridfinity Pinecil + TS100 Tips and Tool Holder

Pinecil Tips w Magnet.stl

Gridfinity Solder Holder station

Gridfinity Solder Holder Base

Gridfinity Hakko 599B Holder

The perfect way to stash the sturdy and inexpensive [Hakko 599B brass tip cleaner](https://amzn.to/3XTwi1Q) on your favorite Gridfinity baseplate. Combine with a soldering stand and wire dispenser for a full soldering station!

To assemble, first remove the feet from the 599B's base to expose the three holes. Insert into the recess so the pegs mate with the holes. For a permanent fit, peen the pegs over with a soldering iron or other hot thingy.

Magnets or screws are VERY STRONGLY RECOMMENDED! You don't want to spill solder dust all over your project!!

Directions:
1. Print one Main Unit and two Sili-Jar Holders from any rigid filament.
2. Take one of the silicone jars apart. Put the lid on the small dish atop the Main Unit to create a screw holder.
3. Cut an X in the bottom of the jar and mount it to a Jar Holder. It will fit snugly in the recessed rim.
4. Take another jar apart and discard the lid. 
5. Completely cut out the floor of the jar bottom and mount to the other Jar Holder.
6. Glue the Jar Holders to the Main Unit. The X goes in the high position and the other goes in the lower position. The floor of both jars face upward.
7. ADD MAGNETS OR SCREWS!!
8. Solder.

Magnets or screws are mandatory for safety. A baseplate is integrated into the stand for more surface area and to manage the center of gravity.

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Fusion source file: https://a360.co/3Vuk7H6

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
You can add [6x2mm magnets](https://amzn.to/3UuuJV9) to the corners!
You can also use [M3 screws](https://amzn.to/3VRrS9T) to secure the corners.

Buck Converter Mount - LM2596 VHB or Bolt-On

LM2596_Buck_Converter_Mount_V1.step

Soldering Clamp

Base Flat.stl

Gridfinity Helping Hands Mount

A Gridfinity mount (2x2) for soldering helping hands - https://www.amazon.com/dp/B002PIA6Z4?psc=1&ref=ppx_yo2ov_dt_b_product_details

Solder Tip Holder Gridfinity for Weller WE1010 soldering station

1x1 Gridfinity solder tip holder for Weller WE1010 soldering station for 16 Tips

Gridfinity 1x1x3 soldering tips

A 1x1 box that organize 8 soldering tips + the full set of soldering tips for threaded insert by CNC kitchen

Compatible with soldering tips of diameter ~6.5mm

Gridfinity Solder Sucker Holder

#Gridfinity compatible holder for this style of solder sucker (aka desoldering pump): https://www.amazon.com/WEmake-WM-SP4-Solder-Sucker-desoldering/dp/B0002KRAAG/

Soldering Station - Gridfinity

K2_Gridfinity_Solder_Iron-Tips-Sponge.stl

Multiboard Soldering Iron Holder

Multiboard Soldering Iron Holder.step

Gridfinity Soldering Spool Holder - 500grms

holder.stl

Pinecil Soldering Iron Carry Case and Portable Solder Station

Pinecil Carry Case - Bottom Half.stl

gridfinity soldering spool holder

Blank Storage.3mf

Gridfinity Soldering Tools Holder

A Gridfinity Soldering Tools Holder.
A Holder for 6 tools in 2x4 configuration. The slots are 3.5mm and the space between the 2 sections is 81mm.

Gridfinity bin for pinecil and included tip

PinecilGridfinity-Magnets.stl

#Gridfinity Solder Tube Holder

Fits the solder tube that comes with this [soldering kit](https://a.co/d/h1vGjyS), and should fit other similar solder tubes with a bottom diameter of 15.40 mm and a top diameter of 16.85 mm directly below the cap. Since the solder tube is an upside-down [frustum](https://www.google.com/search?q=frustum&rlz=1C1ONGR_enUS931US931&oq=fr&aqs=chrome.0.69i59l2j69i57j69i61l3j69i65j69i60.714j0j1&sourceid=chrome&ie=UTF-8), I have made the hole wider at the top than at the bottom. Made to be used with [Zach Freedman's](https://social.thangs.com/u/76763) [Gridfinity](https://youtu.be/ra_9zU-mnl8) system.
Derived from: [Gridfinity | Hole Customizer](https://social.thangs.com/m/62607) by [brian.kerley](https://social.thangs.com/u/118076) which is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

Hakko Soldering Station Multiboard Multiconnect

Hakko Side Mount Multiconnect.stl

FNIRSI HS-01 Soldering Iron Case with Electric Screwdriver

case1.stl

Gridfinity Improved TS100 Holder

A holder for the TS100 soldering iron, with space to easy grab the soldering iron and designed so its easy to transport in combination with my gridfinity lids. I never use different soldering tips, so this is designed for only one tip. There is added extra space around the tip in case the solering iron has not cooled down before putting it back. There is also space for a smal sponge. 

Improved TS100 Holder

Soldering

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Pinecil + TS100 Tips and Tool Holder

Gridfinity Solder Holder station

Gridfinity Hakko 599B Holder

Buck Converter Mount - LM2596 VHB or Bolt-On

Soldering Clamp

Gridfinity Helping Hands Mount

Solder Tip Holder Gridfinity for Weller WE1010 soldering station

Gridfinity 1x1x3 soldering tips

Gridfinity Solder Sucker Holder

Soldering Station - Gridfinity

Multiboard Soldering Iron Holder

Gridfinity Soldering Spool Holder - 500grms

Pinecil Soldering Iron Carry Case and Portable Solder Station

gridfinity soldering spool holder

Gridfinity Soldering Tools Holder

Gridfinity bin for pinecil and included tip

#Gridfinity Solder Tube Holder

Hakko Soldering Station Multiboard Multiconnect

FNIRSI HS-01 Soldering Iron Case with Electric Screwdriver

Gridfinity Improved TS100 Holder