fishing lure mold

**mold size:
**35.4 mm long (1.4 inches)
18 mm wide (0.7 inches)
12 mm high (0.5 inches) 

**Lure size:**
16 mm long (0.6 inches)
12.7 mm wide (0.5 inches)
6 mm high (0.2 inches)


Christmas Village Fence

Poo Rocket - Dog Waste Bag Holder

Poo Rocket v1.step

YZ10 Front Knucle v2.3mf

Yokomo YZ10 Lipo Box

YZ10 Lipo Box Secured.3mf

YZ10 Rear Knuckle v11.3mf

Vintage Tamiya 1/12 Lamborghini Countach (58008)/Porsche 908 Body mounts

Cthulu Puppy

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
_____________________________________________

The Name says it all. Enjoy the kisses from a being from another dimension. 

I hope you enjoy.
______________________________________________
If print some of my models please tag me on social media. 

www.Twitter.com/carmelo_nazario
www.instagram.com/thecreatorx3d

If you want to help a brother out please consider signing up to my patreon.

www.patreon.com/thecreatorx3d

Squirell holding a Heart

Made for valentines day for a friend of mine

Valentines Heart Bowl

This heart-shaped candy bowl sits on top of a matrix of separate but intertwined chiral channels of the Laves Graph. 

Maybe you and your loved one are like intertwined chiral channels?

The channels are approximately 2mm in diameter, which is as small as you’d want to go with a 0.8 mm nozzle. The example in the picture above is printed with a 0.8mm nozzle, and up close you can see a few imperfections. If you like this size, I suggest using a smaller nozzle. If you want to use a 0.8mm nozzle, I suggested scaling up a bit.


sewing stitcher

handle.stl

Flowergirl (generated by Revopoint POP 2)

This Flowergirl model was scanned by Jon.Himself with Revopoint POP 2. You also can download this model from his channel:https://skfb.ly/o88qZ

Refletor Defletor Mavic Mini- Mini SE

refletor.stl

gopro_9_v4.stl

dummy_gopro_body.stl

Degbit ‎EOS 100 bike light reflector lens

I lost the reflector from my bike light. The reflector keeps out water, and also ensures that the light points forward while also using the case as a heat-sink.

Printed with Prusa MK3S+

- Print with the bottom down, using base-plate supports only.
- Glue a piece of aluminium foil onto the slope as a reflective surface.
- Glue a piece of acrylic or other clear plastic to use as a lens cover. 
- Use thermal paste to connect the LED PCB to the casing
- I recommend gluing around the edge a little, to improve water-resistance



RC Car Stands v2.stl

Stands for 1/8 RC Cars.
Height is 60mm of the ground.

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

Micro Camera Shelf

A small shelf for webcams that have a tripod screw thread. I use it to have my webcam stuck on the side of m enclosure for octolapses

Thing ico Digitrax Throttle Holder (DT600, DT500, UT4)

Based on [jtpeyton](https://www.thingiverse.com/thing:4704556) Digitrax Throttle Dimensions. I needed to change the bottom to allow access to the Loconet Cable port (cause I use a tethered system), and the lanyard attachment to fit in the holder for the Digitrax DT600 throttle. It can also hold the last series of Digitrax throttles: the DT500 and UT4. I do not have a UT600 to see if it fits. I also used a 50% infill to increase the holder's strength.

I included the holder in two versions:

    Tethered, the version I added access to the Loconet cable port.
    Wireless, the version with the bottom fully intact.

Print Settings

Printer:

Monoprice MP10 Mini

Rafts:
No

Supports:
No

Resolution:
0.20

Infill:
50%

Filament brand:

Inland

Filament color:

Gray

Filament material:

ABS

Notes:

I used a brim and the print took 4hrs 40mins.
Post-Printing
Optional

You may want to cut and sand away some of the plastic to make it look nicer.

Hobbies & Leisure

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

fishing lure mold

Christmas Village Fence

Poo Rocket - Dog Waste Bag Holder

YZ10 Front Knucle v2.3mf

Yokomo YZ10 Lipo Box

YZ10 Rear Knuckle v11.3mf

View 47 new models

View 24 new models

Squirell holding a Heart

Valentines Heart Bowl

sewing stitcher

Flowergirl (generated by Revopoint POP 2)

Refletor Defletor Mavic Mini- Mini SE

gopro_9_v4.stl

dummy_gopro_body.stl

Degbit ‎EOS 100 bike light reflector lens

RC Car Stands v2.stl

Micro Camera Shelf

Thing ico Digitrax Throttle Holder (DT600, DT500, UT4)

View 12 new models