Graduation Bowtie - CMU & General (Class of 2025)

Bowties 2025.STL

Candy Dispenser Planetary Snowman

Build your own Planetary Snowman

This Snowman has a planetary gear on the bottom so when you hold the center ball and spin the bottom ball his head rotates at 4 times the speed.  If you hold the center ball and spin the head, the bottom will rotate at 3 times slower. If you hold it by the head and spin the bottom or middle ball, it will spin freely, like a bearing. 

It is 133mm tall 100% and does not require supports. I used a .4mm nozzle at .2mm layer heights but a bigger nozzle or layers should work. If you scale it down it will make it more difficult to print but scaling it up will actually make it easier. I think it will scale up to at least 200% if not more without issue. 

Its hollow to save material, be sure not to add any details that extend to far into the inside as it could mess us the mechanics or create a part that should have supports. 


Planetary Snowman

Compact Cord Manager

This is a screw top round box that scales very well.

The boxes in the picture are printed at 100%, 60% and 40%.

Prints without supports

Scalable Round Screw-Top Box

Bubble Vase

Here is a vase with the walls shaped like bubbles.

Preferable to print in vase mode with line width 0.5/0.6 

Ghosts in the mirror are closer than they appear (Ghosts Only))

Halloween is just around the corner!
Objects in the mirror are closer than they appear!

Here is a model of Halloween ghosts seen in the car mirror (without BOO)

Happy Halloween!

Multiple Variations Available:
2 Ghosts with Boo
2 Ghosts only
1 Ghost with Boo
1 Ghost only

Ghosts in the mirror are closer than they appear

Halloween is just around the corner!
Objects in the mirror are closer than they appear!

Here is a model of Halloween ghosts seen in the car mirror.

Happy Halloween!

Multiple Variations Available:
2 Ghosts with Boo
2 Ghosts only
1 Ghost with Boo
1 Ghost only

Caution Caution.STL

This is a 3D printable Caution symbol with an exclamation mark to indicate caution XD

Can be printed in two different colours for better effect. (Highly recommended)

Trashcan with Lid

Dustbin can.STL

M8 Button Bolt Cover

Here is a Bolt covers for M8 Hex head bolts shaped in the form of a button, which provides a sleek appearance.

Caution BioHazard.STL

This is a 3D printable symbol that indicates a Biohazard.

Can be printed in two different colours for better effect.

Chair Leg End Cover

This is a custom designed end cover/plug that can be attached to metallic chair legs that have an oval tubular cross section.

The part can be scaled according to size.

Attaching such a part to the chair prevent the metal from scratching the floor.

Rounded Bolt covers

M8 Rounded Bolt Cover.STL

Caution Radioactive.STL

This is a 3D printable symbol that indicates a radioactive hazard.

Can be printed in two different colours for better effect.

C-Mount.STL

This is a C-shaped mount that can be 3d printed or made out of bent metal.

The two side holed can be used to attach it to a container or bucket-like object. The third, larger hole can be attached to another object or can act as a slot for inserting another object at a certain angle to the initial object.

Flat Bottom Mount.stl

This is a flat mount that can be used at the bottom as a constraint for any rotating object.

It can be considered as an a-arm for small cars and two holes can be used to attach the mount to the chassis while the big hole can be used to insert the upright into place.

Angular Mount.stl

This is an angular mount/frame that can be fixed to any horizontal surface using fasteners. The two angled triangular faces can be used for mounting any required object at an incline. 

Sliding Mount.stl

This is a mount with a single attachment point which can be slid on rails.

Supports required for printing.
Can be scaled as needed.

Spiral Test.STL

This is a large crazy spiral test for testing the overhang performance of your 3D printer.

Can be scaled down as necessary.

Pizza Stool.STL

Here is a pizza stool actually modelled with a pizza on top.
ps. A pizza stool is basically an object kept on top of pizzas inside pizza boxes so that the lid does not touch the surface of the pizza and prevents cheese and toppings sticking onto the lid.

Wheel Small.SLDPRT

This is a solidworks part file of a small wheel that can be attached to a cart or trolley.

3D Printer Nozzle.stl

Here is a small replica of a nozzle used in 3D printers. There are no markings and it can be easily customized as required.

Bolt Casing.STL

This is a casing for hexagonal bolt heads that can be used to cover and hide the bolt heads with a circumcircle diameter of 14.8 mm. 

Octo Twist Box

DISPLAY ONLY.stl

Octo Sudoku Box

Octobox base file created by 3DPrintBunny

Octobox base File

Sliding Dovetail Lock Box with Key

Sliding Dovetail Lid Box by Product Design Online. (Base file for remixing)

Sliding Dovetail Lid Box.stl

Leaf Vase.STL

#MakerMay
Here is a vase with slots that look like leaves. Can be used as a pen-stand or as a flower holder.
Would look best printed in green.
Designed in Solidworks.
.stl files available.



Truck Tyre Rim

TRUCK RIM-1.SLDPRT

Sports Car Tyre Rim

#MakerMay
Here is a single piece rim designed for RC sportscars. Rubber or plastic custom tyres can be added on top of these rims.
Designed in Solidworks.
.sldprt & .stl files available.

SC_tyre rim.SLDPRT

Printing In Progress Sign

Printing In Progress.SLDPRT

Caution Hot !!! Symbol

Caution Hot (Regular).SLDPRT

Caution Hot Mounting clips

GlassBedClip.STL

Shelf Spacer

This part is designed to increase the space between shelves which are supported by tabs on the sides. Placing these spacers on top of the top will help in increasing the height and the distance between two shelves, thus allowing you to store larger objects.

I wasn't able to place my filament boxes vertically due to space constraints so I made these spacers for that purpose.

Quite a small print and can be printed with any required settings.

Happy Birthday Cake Topper

Happy.STL

V2 Logo

Ender 3 Logo

Ender 3 Logo.SLDPRT

Aluminum Profile Insert for 3D Printers

15mm Aluminium profile insert.SLDPRT

Gold Brick

Hey Guys,
This is a replica of a 1000g / 1Kg Gold Brick with almost the exact dimensions. 
Similar text has also been added on top of the brick face. 
The model can be easily 3D printed directly.

I've added both the .stl as well as the Solidworks Part file for 3D Printing or modification.

**Pictures added along with this are of 0.4x scale to original.**

Gold Brick.SLDPRT

HandScrew

HandScrew.STL

RC Car Ramp 

This is a ramp designed for RC Cars. The Solidworks part file has been uploaded and dimensions can be customised as per requirement.

NOTE: The QR Code on the ramp can be replaced with any other image or text as required.

"K" Letter Cake Topper

This is a large cake topper in the form of the Letter K. It is best to 3d print this with glossy/silk filament for the best effect.
(Solidworks part file)

Check out my account for multiple other Cake Topper designs!

RC Remote Controller

This is a Solidworks model of a Remote Controller for RC cars and so on. It's got two joysticks and multiple control buttons.

Remote Controller

RC Truck Tyre with Treads

Here is a truck tire/tyre with proper treads. Can be used for RC Cars or models.
Diameter: 86 mm

Truck Tyre with Treads

ButterDishCover.SLDPRT

This is a cover (lid) designed for a butter dish. It can be placed onto the dish into its grooves over any items that need to be protected from dust, flies, etc. 
The thickness of the cover is 3mm.
Dimensions: 146 x 91 x 83.6 mm
CAD Files for the butter dish can be found in my account.

ButterDishTray.SLDPRT

This is a Butter Dish (Tray) for storing butter. The grooves allow a lid to be placed securely on top. The tray can be used with or without the lid based on requirements.
Dimensions: 160 x 105 x 6 mm
CAD for the lid uploaded on my account as well.
(Solidworks Part File)

Z Mount

This is a Z- shaped mount that can be used for multiple things. I designed and printed it to be used as a mount for the uprights in an RC car. However, this can be easily used for any other purpose that it fulfills as well!
(Solidworks Part File)

30 Cake Topper

This is a cake topper with the number 30 on it. 

Party Glasses Assembly

#custom #pdo #diy

Why buy expensive party glasses/shades from outside when you can print your own!

Here's a set of fully customizable glasses which have a base frame similar to regular glasses which will sit on your nose and ears. Instead of lenses, we have 4 tabs coming out which can be used to dock the variety of attachments onto your glasses.

With 3 different attachments that are fully customizable: 
(Thug Life, 
Text- Party! 
& X O)
get ready to rock the part and click some awesome pictures with these on.

Note: Frame has been designed wrt. a certain head size. please adjust it as per your requirements.

Hope you like the design :) Will try to add some 3d printed product pics as well. Cheers !!!

Uploaded 12:52 PM IST on 13th Nov. 
(11:20 pm PST 12 Nov.)



Ender 3 Tool Holder

#custom #diy #pdo
While my Ender 3 V2 has a drawer for Allen keys and spanners, the bigger tools like the flush cutter and the spatula are just lying around.

Thus, I designed and printed a compact but high utility tool holder which fits on the front left of the printer in the slots on the 80x80 aluminum profile. This tool holder not only fits on the Ender 3 V2 but on all Ender 3 series printers as well as any printer using similar aluminum profiles for the base frame.

The tool holder can hold the following:
1x flush cutter on the side hook
1x spatula in the diagonal slot
1x plastic scale (15 cm) in the horizontal slot
Micro SD cards, card readers, USB drives, etc. in the pocket on the right side.

This has been quite useful to me in practical application and much more cheaper and efficient than buying something similar from outside.

Note: 
1. Supports Required (Refer uploaded print image)
2. The front text (E3 V2) and side initial (N) can be easily customised along with other model dimensions

Hope you'll like my design :) Cheers !!!

Juicer Handle Assembly 1.STL

#custom #pdo
I had a hand-operated juicer at home with a small handle that broke and I was never able to apply a lot of power because of its size.

Thus I have made a print-in-place juicer handle which can easily be mounted on the juicer shaft with a locknut (locknut not included in this design upload)

It works like wonders and everytime someone sees it I have a story to tell

Juicer Handle Assembly 1

Lego | CAD | 3D Printing
I love to design mechanical models on Solidworks and 3D print them!!!

Printed_By_Nis

Achievements

Fan Favorite

Sapling

Explorer