Elf Door 

elf door frame.stl

Santa Stuck in Chimney LED Candle Holder

santa candle holder.3mf

Star Christmas Tree Ornament v2

8-Point Star Ornament Revisited v2.stl

Mini Snow Dragon 2025 

mini snoiw dragon.stl

Springo Santa Hat

SantaHatSpringoComb.stl

XL Max... inspired fan art.

XL Max.3mf

Snowflake Ornament

snowflake with hole 2025 v2.3mf

XL Rudolph

XL Rudolph.3mf

Merry Grinchmas Sign, For the XL and Not So XL Grinch.

not so xl grinch sign.stl

Balloon Holiday Wreath

DISPLAYONLY.obj

Merry Bloom Vase for Christmas Home Decor

Vase of grape leaves2.stl

Grinch Pane for Festive Lamppost

grinch text pane for festive lamppost.stl

Kaleidoscope Christmas Ball 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled it to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.

The narrator

tripo_convert_80c126e3-5f8f-402e-b61f-cf7907e14982.stl

Gingerbread House Vase — A Slice of Christmas Magic 

узор.stl

Berry Merry Cake Container - Jewelry Box and Gift Holder - Day 12/12 Holiday Desserts

Festive

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Elf Door

Santa Stuck in Chimney LED Candle Holder

Star Christmas Tree Ornament v2

Mini Snow Dragon 2025

Springo Santa Hat

XL Max... inspired fan art.

Snowflake Ornament

XL Rudolph

Merry Grinchmas Sign, For the XL and Not So XL Grinch.

Balloon Holiday Wreath

Merry Bloom Vase for Christmas Home Decor

Grinch Pane for Festive Lamppost

Kaleidoscope Christmas Ball 2

The narrator

Gingerbread House Vase — A Slice of Christmas Magic

Berry Merry Cake Container - Jewelry Box and Gift Holder - Day 12/12 Holiday Desserts

Santa Duck

Spiral Christmas Ornament

Kaleidoscope Christmas Balls with Stems

Snowman Candy Holder – Cute Christmas Treat Box