Airbrush Booth Vent

AirBrush_Booth-Exhaust_Panel_V4.stl

Anet A8 Plus - Power Supply Fan Duct

Anet A8 Plus_PS_FanDuct_Ribbed.step

2 inch Inline Fan Duct 60mm Fan 

2 inch inline duct  Top.3mf

3D Printed Duct Fan With 775 Motor

fan.stl

U.F.O. T1 Duct w/Alien!

U.F.O. T1 Duct - UFO.stl

Mobile Air Conditioner Exhaust Duct Adapter

ac_adapter_v1.stl

4 inch to 2 inch duct adapter with groove for hoseclamp

100 to 49mm duct adapte with groove.3mf

H2 V2s Lite 5015 Parts Cooling v4

H2 V2s Lite 5015 Parts Cooling v4 17 Jun.stl

Duct Adaptor Parametric

duct adaptor.step

Cover for Haron International 140 x 140mm Plastic Wall Vent.stl

DELACK ENCLOSURE HEPA FILTER + 4-INCH VENTILATION DUCT

hepa-filter-air-duct-mount.stl

Hero Me Documentation - Details.stl

Documentation Membership Details.stl

Tape Roll Holder // Peg Anything

Duct tape can hold your life together, so it deserves a dedicated spot on the wall! This is also great for your printer's masking/blue tape, as long as it's under 2" thick (50mm). In fact, use this to hold any tape roll with the standard 76mm (3") core, or larger.

Designed for standard pegboards with 1/4" holes spaced 1" apart

K2 Satsana Dual Stock Blower Fan Duct Shroud - Ender 3v2 with CRTouch

K2_Satsana_Dual_Fan_Duct_v.4.0.stl

Creality E-Fit 5015 Cooling Fan Adapter

I created this adapter to mount a 5015 to the E-fit direct drive extruder kit from Creality.

Prints with no supports and very little filament. Use the existing bolts in the kit to mount the adapter then use M3 bolts to mount the fan to the adapter.

This is tested and works but I am no fluid dynamics expert.

Show me yours if you print one!

@kwerkshop on Instagram

HMG7.2 ADXL345 22.5mm Horizontal Mount.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**


 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**


Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.


So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 


If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.


If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com


If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

4in blast gate

sideA.stl

Duct

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Airbrush Booth Vent

Anet A8 Plus - Power Supply Fan Duct

2 inch Inline Fan Duct 60mm Fan

3D Printed Duct Fan With 775 Motor

U.F.O. T1 Duct w/Alien!

Mobile Air Conditioner Exhaust Duct Adapter

4 inch to 2 inch duct adapter with groove for hoseclamp

H2 V2s Lite 5015 Parts Cooling v4

Duct Adaptor Parametric

Cover for Haron International 140 x 140mm Plastic Wall Vent.stl

View 11 new models

Hero Me Documentation - Details.stl

View 111 new models

View 14 new models

Creality E-Fit 5015 Cooling Fan Adapter

View 510 new models

4in blast gate