This tool is untested - use at your own risk!

My attempt at copying Yamaha tool YM-04106. It is used to create a gap between the camshaft and valve buckets. This should allow you to replace the valve shims without removing the camshafts.

Source: https://cad.onshape.com/documents/53037c3e0563f3498ba6c20e/w/234531ff4dbda3d74ec094b0/e/997088d74cfa22ad96122589?renderMode=0&uiState=62834960081f5750d4a320a6

Yamaha XT350 Valve Adjustment Tool YM-04106

This tool is untested - use at your own risk!

My attempt at copying Yamaha tool YM-04106. It is used to create a gap between the camshaft and valve buckets. This should allow you to replace the valve shims without removing the camshafts.

I often buy used furniture that is missing dowel nuts (aka barrel nuts). This holder allows me to use a standard hex-nut for the same function. Recommend printing these in a material with good layer adhesion such as PETG or PC.
The model can be copied/modified how every you'd like and is found here: https://cad.onshape.com/documents/db5f93ae27ead7a6a1e6b5a8/w/af1f4397a5633b61ebd4ec80/e/38e8523b1d7b755a9274b952?renderMode=0&uiState=623eb9c82881b114c4fea9fb

Parametric Dowel Nut (Barrel Nut) Holder

I made this little ear saver a long while back with the intention of making them fast to print, flexible, durable, and compact (for packing more into a build plate). I have given out thousands of these at work and they perform very well, usually lasting more than a week of daily use.

I always print these in PETG with all infill patterns set to concentric and 100% infill.

Ear Jesus: Salvation From Chapped Ears

EarJesus-Standard.stl

This is a stand to measure the thrust of RC motor and propeller combinations. The tray in the base holds a simple digital kitchen scale. The pivot uses a M5 bolt/nut with two 625 bearings.

RC Motor Thrust Stand

ThrustStand - Base.stl

This is a simple funnel and packer that I use with an Atmos Jump vaporizer. It makes loading much easier. 

Atmos Jump Funnel and Packer

AtmosJumpFunnel - Funnel.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4900257.

This adapter connects between a Dewalt DCC020I inflator and the inflation hose of a SereneLife stand-up paddle board. It may fit other applications, but I don't know them.

Source: https://cad.onshape.com/documents/72b37b20b1ada2962e84e2b5/w/233fdec6f4db1cfda255a374/e/15ed93aa633726cf9b4c8a28

Dewalt Inflator Adapter for SUPs and Kayaks

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4568571.

Updated to v2 Sept 9th 2020. Changes made to make the arms longer and lower the profile of the assembly.

This is a quick adjuster for the forks on a Kawasaki Z900RS. It is a print-in-place design so will require a well tuned printer. I printed in PLA with supports from the build-plate only and it came out fine on the first print.

The non-printed parts needed for a pair of these are:
 - 2 flat tip 1/4" hex bits.
 - 4 M3x5mm screws.

The image shows the bit sticking up out of the adjuster. This excess length can be ground down. I also made a lower profile version, but I have not tested it.

Source: https://cad.onshape.com/documents/4fdeee4eb87c1f7958c196a2/w/26abc0a244b3383392a4537d/e/cb1d0ee50c36ad44c964e3fc

Z900RS Fork Adjuster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2008712.

These little plates are intended to funnel the sound from the speakers toward the user. They are attached to the laptop with high strength double-sided tape. Overall, these improve the audio when the computer is on my lap, which is the purpose.

I put a BSD license on this thing, so do whatever the hell you'd like with it. :-)

UPDATE: I have made another version of this part that is thicker and sturdier than the original, which may improve the performance. This additional thickness may cause the rubber pads on the bottom of the laptop to not make contact on flat surfaces.

Lenovo T440 Speaker Funnel Thingy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4596205.

This thing is a replacement part for some models of LG portable air conditioner. The type of nozzle that connects to this part it is shown here: https://www.thingiverse.com/thing:2608955.

I recommend printing the adapter.stl and end.stl files first, then measure the gap between them when installed. After this you can print the number/size of spacers needed to fill the gap. Simply adjust the length of the spacers in your slicing software to get the perfect fit.

If you would like to modify these parts the source files are available at: https://cad.onshape.com/documents/126947b128216c37be939f7b/w/3cecd2ac18bc7af79469d314/e/d5684e0d1508480d466b9cbd

LG Air Conditioner Window Adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4601284.

This thing is an adapter/mount to secure an Ubiquiti EdgeRouter X and Unifi Switch 8 150W in a 19-inch 1U rack slot. The mount can be installed to either side of the switch. The EdgeRouter X has to have the rubber pads removed to fit into the slot where it is secured with two M3x6mm screws and washers.

Source: https://cad.onshape.com/documents/e645343fbebec8287baf9f70/w/ed073d65ee097c8532df73ec/e/9226584cce18fc1f416dd2f2

1U Mount for EdgeRouter X and Unifi Switch 8 150W

This is an adapter to allow installation of a cheap 4x6 inch LED headlight on a Yamaha XT350.

The design requires an M4 threaded insert. M3 inserts are optional but recommended.

Source files are located here: https://cad.onshape.com/documents/53037c3e0563f3498ba6c20e/w/234531ff4dbda3d74ec094b0/e/c4f961e379be5ed4a934598d?renderMode=0&uiState=61782b36a4c1072d7bc1ccd6

XT350 4x6 LED Headlight Mount

front

back

clippy

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

MechanizedMedic