Mini Print-in-Place Vise

**Print-in-Place Mini Vice**
This mini vise prints vertically as one piece using no supports. There are small pads on the moving jaws that reduce the clearance required in order to print it in place.  The risers under the vise allow the handwheel to be turned while sitting on a flat surface. The knob on the hand wheel should swivel as well.  The jaws are 64mm wide and  open to 80mm.  It has an overall printing height of 164mm.

**Print Instructions**
The moving jaws form on top of the serrations of the stationary jaw and as a result it’s important that you use a .4mm nozzle x .45mm line width, and .2mm layer heights if printing at 100%.  To free the jaws after printing I pried slightly with a screw driver on each side of the jaws before opening it with the screw.

The hardest thing about this print is probably the overhangs and bridging as a result of the weight saver holes.  If these hole are causing people issues I can make a version without them but I think most printers have adequate cooling to handle it. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.

Printed with [3D Fuel Silver PLA]( https://www.3dfuel.com/collections/175ppla)


Print-in-Place Mini Vice

Steampunk Light Switch

SWITCH ASSEMBLY.stl

Baby Yoda - Grogu

Grogu -.stl

Tiny Donut Spider

Cinderwing3D Tiny Spider Donut Color.3mf

Gridfinity Toolbox (Parametric)

Plate.stl

Hand Crossbow 3D-print

Hand Crossbow 3d-print ready
For pellets or bullets diameter 7-7,5mm

AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest

AMS Stand 10mm rod - decorated left.stl

Octopus - Cinder Hatchling

Cinderwing3D Octopus Hatchling Colors.3mf

Darth Vader Pen and Phone Holder

Darth Vader Pen and Phone Stand.stl

Mario and Yoshi - Super Mario Bros - Fan Art

Mario and Yoshi - Super Mario Bros - Fan Art

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Cubone - Pokemon - Fan Art

Small Thread - Raised Fix Point

2.6 mm Offset - Small Thread - Multipoint.stl

Gridfinity 1x1 Dense 9 Full SD & 9 Micro SD Card Storage

This is a 1x1 block for the Gridfinity system, which stores up to 9 full-size SD cards as well as 9 Micro SD cards.

I recommend printing this if you have a large amount of SD cards to store. This is not great for cards which you are using constantly, as it will get tedious to remove individual cards. This is dense storage for those of us who have lots of these cards and adapters lying around.

Print settings are as usual for my Gridfinity items:

Layer height: .24 - .32
Top / Bottom Layers + Walls: 3 - 4
Infill: 10% - 20%

Use the lower values for cheaper / faster prints; use the higher values for weightier / higher quality items. You get the idea.

Gridfinity Dense 1x1 Full SD & Micro SD Storage

Shenron - Dragon Ball Z - Wall Decoration 

Shenron - full.stl

Vampire Skull - Decoration

Vampire Skull - Decoration
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Togepi - Pokemon - Fan Art

Togepi - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

✊

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mini Print-in-Place Vise

Steampunk Light Switch

Baby Yoda - Grogu

Tiny Donut Spider

Gridfinity Toolbox (Parametric)

Hand Crossbow 3D-print

AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest

Octopus - Cinder Hatchling

Darth Vader Pen and Phone Holder

Mario and Yoshi - Super Mario Bros - Fan Art

Cubone - Pokemon - Fan Art

Small Thread - Raised Fix Point

Gridfinity 1x1 Dense 9 Full SD & 9 Micro SD Card Storage

Shenron - Dragon Ball Z - Wall Decoration

Vampire Skull - Decoration

Togepi - Pokemon - Fan Art

7x7 Multiboard Corner Legacy Tile

TCG Munkey Card Scanner With Phone Tower

Bracket-Fix Point Joint

9 mm Small Thread, Flat Head, T-Bolt