AllAll

AllAll

Hand Crossbow 3D-print

by

Arkoudaki

Follow

Follow

Remix Model

Social

Like

Hand Crossbow 3D-print by Arkoudaki full viewable 3d model

Loading preview...

482 Likes1604 DownloadsJune 22, 2021

Community Uploads

Hand Crossbow 3D-print - Thanks a lot for this model and providing the CAD files. I was able to modify a lot of little points to make it easier to print and build

- 45degree for the loading slot
- M3 screws instead of plastic joints
- Split in half and added slot to the front part to print it with less supports
- Added a centering pin for the top center part
- Added some more space for the locking front
- Need to reduce the bullet slot, as they will fall when loading it
- Merged all the two parts in one because I have a larger printer

I will upload my files once I've finalized my little tweaks.

Thanks again for the model, it even fires :D

Hand Crossbow 3D-print - Loved the project! Good model 9/10

-Printed in all PLA
-Printed with 2mm height and 20% infill, supports on everything that needed it
-Worked on my Ender 3 V2

The only problem I have with this model other than it's difficult assembly is the fact that it doesn't **** when you pull it back all the way, you need a screwdriver or something long and thin to **** it for you because the elastic doesn't have enough strength to do it for you, slowing down firing considerably. Otherwise, great project.

Hand Crossbow 3D-print

482 Likes1604 DownloadsJune 22, 2021

Community Uploads

Hand Crossbow 3D-print - Thanks a lot for this model and providing the CAD files. I was able to modify a lot of little points to make it easier to print and build

- 45degree for the loading slot
- M3 screws instead of plastic joints
- Split in half and added slot to the front part to print it with less supports
- Added a centering pin for the top center part
- Added some more space for the locking front
- Need to reduce the bullet slot, as they will fall when loading it
- Merged all the two parts in one because I have a larger printer

I will upload my files once I've finalized my little tweaks.

Thanks again for the model, it even fires :D

Hand Crossbow 3D-print - Loved the project! Good model 9/10

-Printed in all PLA
-Printed with 2mm height and 20% infill, supports on everything that needed it
-Worked on my Ender 3 V2

The only problem I have with this model other than it's difficult assembly is the fact that it doesn't **** when you pull it back all the way, you need a screwdriver or something long and thin to **** it for you because the elastic doesn't have enough strength to do it for you, slowing down firing considerably. Otherwise, great project.

Hand Crossbow 3D-print

Hand Crossbow 3d-print ready For pellets or bullets diameter 6.5-7,5mm 3D print ready. for Ender3

Category

Hobbies & Games

482 Likes1604 DownloadsJune 22, 2021

Community Uploads

Hand Crossbow 3D-print - Thanks a lot for this model and providing the CAD files. I was able to modify a lot of little points to make it easier to print and build

- 45degree for the loading slot
- M3 screws instead of plastic joints
- Split in half and added slot to the front part to print it with less supports
- Added a centering pin for the top center part
- Added some more space for the locking front
- Need to reduce the bullet slot, as they will fall when loading it
- Merged all the two parts in one because I have a larger printer

I will upload my files once I've finalized my little tweaks.

Thanks again for the model, it even fires :D

Hand Crossbow 3D-print - Loved the project! Good model 9/10

-Printed in all PLA
-Printed with 2mm height and 20% infill, supports on everything that needed it
-Worked on my Ender 3 V2

The only problem I have with this model other than it's difficult assembly is the fact that it doesn't **** when you pull it back all the way, you need a screwdriver or something long and thin to **** it for you because the elastic doesn't have enough strength to do it for you, slowing down firing considerably. Otherwise, great project.

Hand Crossbow 3D-print

482 Likes1604 DownloadsJune 22, 2021

Community Uploads

Hand Crossbow 3D-print - Thanks a lot for this model and providing the CAD files. I was able to modify a lot of little points to make it easier to print and build

- 45degree for the loading slot
- M3 screws instead of plastic joints
- Split in half and added slot to the front part to print it with less supports
- Added a centering pin for the top center part
- Added some more space for the locking front
- Need to reduce the bullet slot, as they will fall when loading it
- Merged all the two parts in one because I have a larger printer

I will upload my files once I've finalized my little tweaks.

Thanks again for the model, it even fires :D

Hand Crossbow 3D-print - Loved the project! Good model 9/10

-Printed in all PLA
-Printed with 2mm height and 20% infill, supports on everything that needed it
-Worked on my Ender 3 V2

The only problem I have with this model other than it's difficult assembly is the fact that it doesn't **** when you pull it back all the way, you need a screwdriver or something long and thin to **** it for you because the elastic doesn't have enough strength to do it for you, slowing down firing considerably. Otherwise, great project.

Hand Crossbow 3D-print