An improved add-on strain relief for the creality Ender-3 S1. Print : Resolution: 0.16 mm Infill: 100% Supports: Yes !!! ATTENTION !!! Please be aware that for very high models (> 250mm) the toolhea

Remixed Ender 5 (Pro, Plus) hotend strain relief for bowden tube and heater/thermistor wiring. Three models, one slightly wider to better fit Ender5-Plus and with modification to fit with the Satsana

A strain relief for the heated bed is crucial! A failed thermistor wire can lead to thermal runaway which may or may not be handled by your firmware, and worst of all, if you have an AC heated bed lik

Simple cable strain relief for the Micro Swiss Direct Drive (Ender 5 version). Prints with no supports. Mounts on the aluminum plate with a screw. FreeCAD file included, so you could easily adapt it f

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4740312. This is a remix of https://www.thingiverse.com/thing:4632689 Added some distance on the clip. If you have the

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5215119. A relief for the bowden and cable to the heat end

Made with only 10 iterations

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4965685. I liked the design that this was based on but had a few issues. I don't include unaltered parts here. Look back

I modeled this modest, easy to print mezuzah with a tree relief.

3D PRINT/LASER EDGING COMPATIBLE, BLEND FILE, HDRI, AND BASE LINE ART INCLUDED. ENJOY FREE CONTENT THAT OTHERS ARE SELLING YOU RIGHT HERE WITH CEPHALOS81

This contraption will save the USB Port on the Rode NT-USB from wearing out and breaking over time. You simply slide the strain relief on the round bit on the bottom of the microphone and plug the cab

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4392316. Side exit cable strain relief for the Z axis stepper motor and spindle motor cables on a 3018 CNC Mill / Engrave

A RELIEF OF GANESH, SOME SUPPORT MAY NEED TO BE ADDED DEPENDING ON YOUR 3D PRINTER. THAT IS WHY THE .BLEND FILE HAS BEEN INCLUDED SO YOU CAN EASILY ADJUST HEIGHT, SLICING AND EVEN COLOR SCHEME. IF LAS

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1099452. Button with Ataturk relief.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4613766. Huanyang VFD Line Filter extension box created for my hy01d511b. Used M5 screws and nuts to mount the line filte

256 iterations. Made using python script in Blender.

The model can be used for CNC or 3d Print. This free 3D printing design is exactly what you need for your next creation. Just download the free STL file and enjoy the result. Layer height - 0.16

Art piece depicting both main characters from Deathnote. This one is awesome for video, game asset or 3d printing. It can be used however you like and best of all all materials and textures are includ

This Painting relief sculpture model was scanned by Revopoint Range. If you want to get more perfect models like this, please back Revopoint Range on Kickstarter: https://www.kickstarter.com/projects/

RELIEF TILE OF THE VENOM LOSE IN A CITY. GOOD FOR 3D PRINTING/LASER EDGING.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6156892. <a href="https://jfs-agri.com/index.php/agtech-projects/49-system-level-projects/50-project-fireplace/52-data-ma

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4613766. Huanyang VFD Line Filter extension box created for my hy01d511b. Used M5 screws and nuts to mount the line filte

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4138892. I modified the original design to fit the aftermarket (yellow/blue) springs for the bed. All modifications:

BL-Touch with strain relief for Creality printers. Uses stock hardware, prints with no supports, captive nuts for BL-Touch hardware.

This adds a 4mm diameter hole to accept the bowden tube and provide strain relief for both the cables and the PTFE tube going to the print head. Current version has the following changes: makes t

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4127243. This is a customisable riser for an FFC (flexible flat cable) extension PCB. This riser is intended for use o

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3629739. Remixed to fit with the bed lowering system (using 8mm bolts to attach) and with a enlarged center hole to facil

MAPA RELIEVE MALLORCA CABRERA RELIEF MAP

Uploaded by Thangs Sync

Uploaded by Thangs Sync

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4315248. A simple remix of shinwachi X-axis strain relief for the Prusa mini. I simply opened up the ziptie hole that

Uploaded by Thangs Sync

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4934243. This version of the Orbiter v1.5 extruder mount pulls from a number of models. It avoids the end stop and h

A bracket to alleviate the stresses found at the extremes of the build volume that bend and put pressure on the Bowden tube connectors causing shortened life of the part. Use a standard size Zip Tie (

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2868439. From original: This hotend assembly is composed of two halves that bolt together around the E3D heatsink gr

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4295811. I tried many of the ear saver gizmos others have posted and while they were all better than the pressure on the

I recently replaced my hotend with an E3D V6 all metal hotend. I had to rewire quite a bit and when I was done I wanted a better way to provide strain relief to the wire bundle.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5037683. When you (for whatever reason) have uncoupled your hotend cables from the bowden tube you will find out rather s

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3224706. I just took the Fusion file and added the Prusa logo type to the top. That's all...

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5137605. For your BIQU B1 3D printer ... this is a print bed AC heater wire strain relief part that is modified to have a

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2746497. This is a remix of Kiolia's strain relief, which I've modified to suit the Anycubic Linear. The original was des

Don't let your Neptune 3 cables be a DRAG! Neptune 4 either! The new Elegoo Neptune 3 Plus / Max (And Neptune 4 Max & Plus) lines are an excellent lineup of 3D printers, but they have one major f

Fidget Bolt Toy good for stress relief. You can unscrew the bottom part to make it works as a stash container as well, so you can keep small staff in it. Easy to print without any additional supports.

Don't let your Neptune 3 cables be a DRAG! The new Elegoo Neptune 3 Pro Elegoo includes a single P-Clamp to mount this harness and it simply is not enough to do the job adequately. NOTE: **

This is a 2D shaded relief map of Middle Earth, with a crazy depth illusion. The print is only 2mm thick, but because of the way the print is shaded, looks to be a lot thicker and 'deeper' than that.

I have here taken and edited this model for SAE bits: https://www.thingiverse.com/thing:3347979/files The cap/top can be printed with no supports upsidedown. Original description: Video here:: htt

If you own a Wyze Cam, you've probably debated mounting one outdoors. After all that's where security cameras tend to be most effective! This outdoor housing for Wyze Cams v

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4329631. While I try to keep this set of files up to date the repository always has the latest model files: https://bitb

6 Color HueForge model. Aztec carving filament painting made using Sunlu and Esun PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunl