Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2177455.

A simple M3 nut knob. Works great with both regular nuts and nylock nuts. This version is adapted for the DIN985 standard, which is common in the EU.

Print with the thumbscrew's largest face on the print bed, that is, upside down.
I printed using PLA, no issues.

This is a remix of http://www.thingiverse.com/thing:2153764 

M3 Nut Knob DIN985

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5020179.

Remixed from the already excellent design by vl4dt3p3s, https://www.thingiverse.com/thing:3995301

My alterations:
 - Added chamfers to vent slots to reduce required supports. Makes it for uniform looking to me :) 
 - Added M3 sized holes at the bottom of the brass insert slots, in case you have screws that are slightly too long (like me)
 - Made the tabs for the lid slightly larger
 - Made the part about the motherboard IO shield slightly thicker
 - Redid the inlay so that it and the inlay groove in the case can be printed without supports
 - Some other small changes that I probably forgot

Things I want to add, but haven't yet:
 - Add hole in lid for a fan

You should be able to follow the instructions in vl4dt3p3s design. Although you can now use slightly longer M3 screws if you don't have the proper sized ones.

It does take a long time to print! 
Printed mine with a .8mm nozzle with a layer height of .28mm and it still took about 24 hours to print. 
Supports are required, unless you REALLY have large bridges dialled in. 
Did reduce the amount of top and bottom layers to 3, you could probably go down to 2 if you wanted to save on plastic, with the risk of having issues when inserting the M3 brass inserts (they might melt right through!) 

I have included the source Fusion360 file if anyone else wants to remix this further!

HTPC - pfSense mini-ITX case, less supports remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4896847.

A simple low profile base for the very nice watch stand by [PRIma](https://www.thingiverse.com/thing:3053563).
The stand base is inspired by [P4ckit](https://www.thingiverse.com/thing:3156585) design, but made from scratch in Fusion360.

The pieces are interconnecting to make a stylish display stand for your watches! They do not need any supports to print properly. Very easy to expand when your collection expands.
Infill isn't very important, 10-20% is more than enough for this.

Source file is included if anyone wishes to modify it. 

Feel like buying me a coffee or to simply support me and my designs?
https://ko-fi.com/deekkarn

Low Profile Adjustable Watch Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4315248.

A simple remix of shinwachi X-axis strain relief for the Prusa mini.

I simply opened up the ziptie hole that clamps the strain relief to the stepper motor to allow for larger zipties. The update FreeCAD file is included.

Updated 31-05-2020: 
I've added a tiny notch in the cable holder part of the design so that they ziptie better clamps down on the cable. Download version 2 if you want the notch, otherwise just use the first version without it.

Feel like buying me a coffee or to simply support me and my designs? 
https://ko-fi.com/deekkarn

Prusa Mini X-Axis cable strain relief larger ziptie

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4413164.

I wanted to clean up my desk from all the clutter and one thing that had to go was the Schiit Audio Fulla 2 heaphone DAC/amp combo, but I still need it if I want to enjoy music or any sound at all for that matter.
So why not mount it underneath my table instead?

This design encapsulates the unit entirely and mounts it very securely to the underside of your table. It uses 4 screws to mount to the table.

Feel like buying me a coffee or to simply support me and my designs? 
https://ko-fi.com/deekkarn

Schiit Audio Fulla 2 under table mount

Simple man from northern Sweden, designing and printing stuff. Programming happens. 
Current printers in farm:
 - Prusa Mini
 - Creality CR6-SE

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

16BitOwl

M3 Nut Knob DIN985

HTPC - pfSense mini-ITX case, less supports remix

Low Profile Adjustable Watch Stand

Prusa Mini X-Axis cable strain relief larger ziptie

Schiit Audio Fulla 2 under table mount