Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5020179.
Remixed from the already excellent design by vl4dt3p3s, https://www.thingiverse.com/thing:3995301
My alterations:
- Added chamfers to vent slots to reduce required supports. Makes it for uniform looking to me :)
- Added M3 sized holes at the bottom of the brass insert slots, in case you have screws that are slightly too long (like me)
- Made the tabs for the lid slightly larger
- Made the part about the motherboard IO shield slightly thicker
- Redid the inlay so that it and the inlay groove in the case can be printed without supports
- Some other small changes that I probably forgot
Things I want to add, but haven't yet:
- Add hole in lid for a fan
You should be able to follow the instructions in vl4dt3p3s design. Although you can now use slightly longer M3 screws if you don't have the proper sized ones.
It does take a long time to print! Printed mine with a .8mm nozzle with a layer height of .28mm and it still took about 24 hours to print. Supports are required, unless you REALLY have large bridges dialled in. Did reduce the amount of top and bottom layers to 3, you could probably go down to 2 if you wanted to save on plastic, with the risk of having issues when inserting the M3 brass inserts (they might melt right through!)
I have included the source Fusion360 file if anyone else wants to remix this further!