This is a net pot for hydroponic gardening. I've used it to grow lettuce, basil, cilantro, and parsley and have not encountered any problems.  The part is split in two so it can be printed without su

This is all my files to print your own tower, you will need a 350mmx350mm bed to print these as these are large. I recommend a .8mm or 1mm nozzle cuts down on print time and adds strength. Besides the

a little net pot designed to fit IKEA's rockwool plugs. prints (good enough) without supports.

I didn't want to spend money for something as simple as a net pot for my fogponics indoor farm. Since these net cups come in different sizes, I created a parametric design which can be configured in m

A net pot design with holder for a wick and sized to fit in a wide mouth mason jar. I use a standard nylon webbing strap as a wick. I recommend printing upright with support around the brim. Be car

Hello! This is an adapter used to hold a 2 inches net cup into a mason jar of 8cm diameter. I'm using it as a kratky method right now, but it can be used to any other kind of hydroponics just to s

50mm diameter, 50mm tall net pot for hydroponics

2" Net pot for hydroponics. Print @ .2mm layer height with the cup upside down and no supports will be needed. Once done printing the cutouts on the bottom will have a 1 layer bridge to cut away.

<p>This is an adapter for amazing <a href="https://www.thingiverse.com/thing:3405964"> Modular Hydroponic Tower Garden by boundarycondition</a>. it works perfectly with <a href="https://www.thingiver

net pot and ring for my mini aquaponics system

6'' inch Hydroponic DWC Deep water culture media mesh net, Bubble bucket DIY

The wifey wanted these to keep the light off of her lil sprouts rock wool / roots

Thanks to maddin_2 for his wonderful pot! I have searched for many different designs and this was the only real working design where it prints well with the needed extraction point to point print. Oth

TLDR: Net pot for hydroponics printed flat in 2 pieces. Fits a 50mm (2 inch) hole. Quick and easy! Usual story, started experimenting with growing herbs, etc. hydroponically, and needed so

I have designed this 50MM net pot based off of (Dani's Indoor Grow Towers on Thingiverse :6444781) If you have any suggestions please let me know.

Wanted mason jar lid with net pot built in. Used https://www.thingiverse.com/thing:3155622 net pot and combined it with the lid, extruding hole, and then exporting to STL

Customized version of https://www.thingiverse.com/thing:790339 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=790339

Customized version of https://www.thingiverse.com/thing:790339 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=790339

This is a cover for the receptacle of a Hydroponic Net Pot. The STL file is for a 3 inch hole, but the scad file is included for any size you may need. Also available on Github: (https://github.co

After trying to fit a square peg into a round net pot I decided to make this. I designed it for 1-1/2" (40mm) Grodan mini-blocks to go into the hole for a 2" net pot. From the bottom of the lip to th

this is a 3" net pot that I use in my hydroponics setup. As you can see in the picture it is basically identical to the commercial one

Customized version of http://www.thingiverse.com/thing:790339 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=790339

Cap for 2" Net Pot Print Settings Printer: Ender 3 Supports: No Resolution: 0.2mm Infill: 20% Filament material: PLA https://www.buymeacoffee.com/vermontsfinest

6" hydroponic grow media mesh hearts pot, Designed for my DIY DWC deep water culture bubble bucket project,I have placed four holes at the top of the net mesh lip to hold the net in place, after cutt

Customized version of https://www.thingiverse.com/thing:790339 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=790339

I designed this wide-mouth ball jar sieve to use to soak things in alcohol. The sieve allows me to just lift it out with everything in it to rinse. Printing: PLA is recommended. I printed this mo

this is a simple net pot required for the tower garden, instead of buying it, you can print it, if you have a 1mm nozzle, with 0.6mm of layer height, you can print it in less than 40 minutes each.

2 inch net pots will sit nicely on top of a regular mouth mason lid, but are not secure - this fixes that.

Couldn't find net pot to my liking so I designed one myself.

Same as my other net pot, but can be printed using spiral/vase/spiralize contour mode in <20 minutes. also, it's probably not quite as strong as the other one, not recommended for huge tomatoes.

Hydroponic Net cup/pot System for 4" PVC Pipe Start your plants off first in the smaller net cups in a cloner/nursery. Once you are ready to move your plants to your 4" PVC pipe hydroponics system

Perfectly fits a wide mouth mason jar. The print is designed with a 1 layer bridge across the bottom. This will allow it to be printed without any support. After done printing just trim the cut

This is a net pot with a thread on flange. It is around 140mm diameter with an 8mm flange.

This is a 80mm pod for Dani's indoor tower. Community printed and tested! based off of the successful 50mm pod design.

Customized version of https://www.thingiverse.com/thing:790339 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=790339

Voronoi inspired Net Pot/Planters for our Xoodo Pöd system but can be used universally (also IKEA Vaxer) Size : 68x68 mm *do check out the overall concept of this design,our aim is to automate

Correctly oriented, scaled and reinforced version of the Rise Garden pods created by @Friedham on printables.

3 inch net-pot for hydroponic systems. Can be printed without supports to save you time and material. (The bottom is printed separate from the pot and should be dropped in when "assembling" the

For some reasons IKEA does not sell the Vaxer net pots anymore where I live, so I've made my own direct replacement.

A screw top lid for a common ebay pickle barrel (https://www.ebay.co.uk/itm/Plastic-barrel-25L-Water-Storage-…

A Kratky method net pot with a stand and ring for holding plants up

This lets you put up to 9 seedlings in a single net pot for hydroponics

This is a 1.5 inch net pot and an optional drip nozzle attachment. Fits in a 2 inch diameter hole. Used with hydroponics and DWC. The drip attachment is designed to snap on. It fits rapid rooters and

Customized version of https://www.thingiverse.com/thing:790339 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=790339

Customized version of http://www.thingiverse.com/thing:790339 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=790339

Customized version of https://www.thingiverse.com/thing:790339 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=790339

Why buy em when you can make em. Extra wide ring works great in a bucket lid. Drill a 3.75 hole in bucket lid and slide it right in. You do have to use supports (at least my machine does) no matter wh

...steeper angle.

Customized version of https://www.thingiverse.com/thing:790339 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=790339

Aquaponic Rack and Net Pot for the Top Fin Indulge Easy Clean 3 gallon Aquarium