Pothos - Articulating Plant

2.6K downloads · 2 years ago · [Instructions](https://prinnit.com/ForgeCore/design/3683b06e7EiDYr29TSHuXmkIhX9?tab=instructions&hig

Description

Instructions Hardware Filaments

Pothos - Intermediate Another Articulating Plant! This one turned out really lifelike. Took me a couple dozen versions to get it right. I made it while surrounded by 3 real pothos plants to try and get it to look as realistic as possible. Put this in a hanging pot, and it will look awesome! Make sure to cover the base with dirt to get an even more realistic appearance.

Tags:

Community Makes (3)

Rainbow Pothos

This was a fun print and perfect for someone like me who has the opposite of a green thumb for real plants!

The first time I printed the branches, I used supports and brim but it was such a pain getting them cleaned up. This time I didn't use either and it printed just fine.

Leaves were printed on a Bambu X1C and the branches were printed on a Prusa MK4.

A tricky make but looks great from a hanging basket.

Community Makes (3)

Discussions

YoungPrint3D1 year ago

PrinterBambu Lab A1

mrtltrtl102311 months ago

Which color did you use for this? It's perfection.

YoungPrint3D11 months ago

I used ERYONE Silk Dual Color PLA Yellow Green. I bought it on Amazon https://a.co/d/3QlLXBx

Will(Same)2 years ago

A tricky make but looks great from a hanging basket.

PrinterBambu Lab P1S

Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm

MaterialPLA

Layer height0.08 mm

Infill density5 %

Sierra9072 years ago

Rainbow Pothos This was a fun print and perfect for someone like me who has the opposite of a green thumb for real plants! The first time I printed the branches, I used supports and brim but it was such a pain getting them cleaned up. This time I didn't use either and it printed just fine. Leaves were printed on a Bambu X1C and the branches were printed on a Prusa MK4.

PrinterBambu Lab X1

MaterialPLA

SupportsNone

BrimNo

rjjanice2 years ago

I have an Elegoo Neptune 4 pro and also am unable to get a solid layer for the leaf... any help? I already tried lowering my offset and it still isn't printing as a solid layer. Edit: I used the Prusa slicer and the leaf worked great.

ForgeCore1 year ago

Please make sure you are printing at 0.08 mm later height!

snook09738 months ago

Love this design! I'm trying to just print the short branches by themselves and they keep failing. Any advice? Thanks in advance.

ForgeCore8 months ago

Hi, Those short branches can be trouble sometimes. My advice for those is to make sure your filament is dry and also slow your print speeds down significantly. That way your printer has the best chance of printing those overhangs.

View all 15 discussions