Rainbow Pothos
This was a fun print and perfect for someone like me who has the opposite of a green thumb for real plants!
The first time I printed the branches, I used supports and brim but it was such a pain getting them cleaned up. This time I didn't use either and it printed just fine.
Leaves were printed on a Bambu X1C and the branches were printed on a Prusa MK4.
I have an Elegoo Neptune 4 pro and also am unable to get a solid layer for the leaf... any help? I already tried lowering my offset and it still isn't printing as a solid layer. Edit: I used the Prusa slicer and the leaf worked great.
Hi, Those short branches can be trouble sometimes. My advice for those is to make sure your filament is dry and also slow your print speeds down significantly. That way your printer has the best chance of printing those overhangs.
Discussions — Pothos - Articulating Plant
Which color did you use for this? It's perfection.
I used ERYONE Silk Dual Color PLA Yellow Green. I bought it on Amazon https://a.co/d/3QlLXBx
I have an Elegoo Neptune 4 pro and also am unable to get a solid layer for the leaf... any help? I already tried lowering my offset and it still isn't printing as a solid layer. Edit: I used the Prusa slicer and the leaf worked great.
Please make sure you are printing at 0.08 mm later height!
Love this design! I'm trying to just print the short branches by themselves and they keep failing. Any advice? Thanks in advance.
Hi, Those short branches can be trouble sometimes. My advice for those is to make sure your filament is dry and also slow your print speeds down significantly. That way your printer has the best chance of printing those overhangs.