Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4980225. I use the dryer as a holder box and do not feed directly into the extruder. So to try and keep outside air to a

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5513630. Update 24 Feb 2023: Added new versions (V2) and (V3) with some minor tweaks. Made the claws slightly weaker and

Tapón para la caja de secado/almacenado de filamento 3D de AliExpress. Compré [esta caja para secado/almacenado de filamento 3D](https://es.aliexpress.com/item/1005007712210110.html?gatewayAdapt=glo2e

The Sovolsaurus Rex, a modified and upgraded Sovol 3D Dual Filament Dryer with activated carbon & silica drying cartridges, exhaust fan and LED indicator light. Dries twice as fast as the original des

Bed Filament Dryer just add a cardboard box and a 4010 fan and heat the bed to dry your filament.

3D-Printed Filament Dryer for Enhanced Print Quality Improve your 3D printing by drying your filament with this custom-designed filament dryer! Tailored to fit standard circular food dehydrators,

Designed a Filament Dryer for 1.75mm 1 Kilogram Spools. The Design is shaped so that a Simple Filament Roller ( https://www.thingiverse.com/thing:6732615 designed by e_grnsmnn ) can fit inside as well

Ender 3 V3 SE Filament Dryer Holder printed in ABS No jiggle and no wiggle!

Yeah, that's a lot of title to work through, ain't it? I designed this bracket to mount to an Ikea Lack table (55cm x 55cm). You will first need to download this file: https://www.printables.com/mo

Adapt a food dehydrator to work as a filament dryer. Adjust the wall height to fit one or multiple spools. Fusion 360 file included. Change the diameter and other parameters to fit your dehydrator.

Because my Comgrow dryer sits above the printer, the PTFE filament guide puts a lot of stress on the print head, causing step skips and can even pull the dryer over. Therefore, I replaced the through-

Snap on bracket to hold your filament dryer lid open at a 90 degrees upright position. Made this to fit my Sunlu & Jayo FilaDryerS1 units. I've added a M10 PTFE fitting with a flange (https://than.g

I made this top rail mount for an eSun filament dryer box, to be used with a direct drive system on an Ender 3 Max. Printed at 25% triangular infill with normal PLA, it is more than strong enough to s

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6399971. filament dryer feet / standoffs, thing gets hot underneath, made these to just let a little more air in around t

Sunlu filament latch, My solution to keeping the cover closed on the Sunlu filament dryer while printing, when gluing the halfs on keep it all together with the hinge rod in 5mm bamboo skewer rod then

The string that comes with the Eibos Filament Dryer was not a pleasure to interact with. It came out under normal use and gave me the gumption to make a better replacement. I wanted a spring loaded kn

First version of my filament dryer made out of cheap food dehydrator. This is just a circular wall splitted into three parts so I can print it on my Prusa i3. Watch full video: https://youtu.be/jtaRjH

Originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5199066 Designed to plug the EIBOS Filament Dryer exit holes. Keeps moister from entering box. Easy print with default PrusaSli

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4279074. I created these cylinder chambers to make a food dehydrator into a makeshift filament dryer. I made two sizes de

The SH01s and Comgrow 2-spool dryers are decent out of the box and get the job done, but anyone who owns one knows that the fan just doesn't circulate enough air, leading to uneven drying and inaccura

Do not change orientation, default orientation already edited to avoid use of supports. Enclosure required! The hotter the better but 50c should be the bare minimum. Even then still use at least an

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6399778. Simple lid prop, instructions says to leave the lid open a bit while drying to let the humidity out, so i guess

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4946616. I wanted to use a 4010 blower instead of a larger fan for the inside of my FilaDryer as it doesn't need a huge a

This hole plug is specialized and designed for SUNLU FilaDryer S4. To prevent the moisture re-flow into the filament dryer. SUNLU FilaDryer

1/420 Scale RX-0 Unicorn Gundam (Destroy Mode) 3D Printed Tabletop Miniature 29.12 mm x 18.30 mm x 51 mm Printer: Bambu Lab A1 mini 3D Printer Filament: FDM TPU Medium Hard (95A) 1.75 mm Filament Dry

This is a spool adapter for Inland Brand Filaments that have a cardboard spool rather than the plastic spool. Why? This version was designed specifically to allow Inland Filament Spools to fit inside

Instagram❤️ Facebook❤️ TikTok❤️ [*

Instagram❤️ Facebook❤️ TikTok❤️ [*

This is the latest version of my filament dry box. It's made using a Rubbermaid 21-cup (or 22-cup?) container made for keeping cereal and pasta in bulk. This container also happens to be the exact siz

The reduced to the max filament dry box! Design If you are looking for a fancy dry box with filament feeder and spool holder and hygrometer and whatnot then this one is NOT for you! This is the m

Desiccant Dryer in a spool shape and size in order to dry loose desiccant in an active dry box. In my case I am using the Sunlu S4. It also doubles as a desiccant holder to maintain low humidity when

Isn't it funny how some events can set things in motion? My Bambu AMS desiccant was all used up, so I decided to order some silica gel pearls that change color when they've done their job. I installed

Instagram❤️ Facebook❤️ TikTok❤️ [*

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4900483. I needed a cable holder for my portable lamp. The result is this model. I print using a <a href="https://s.cl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4906665. This is just a joke with a subtext in the style of art street. I print using a <a href="https://s.click.aliex

Instagram❤️ Facebook❤️ TikTok❤️ [*

Instagram❤️ Facebook❤️ TikTok❤️ [*

Update 12Jun22: Version 2 added. Frame mounting tab made narrower to help clear parts of an LED light strip (if used). Mounting hole recess also removed so bracket can be turned around if desired. M

Yet another Desiccant container The main reason for my decision to design a new desiccant container that can hold a digital humidity sensor, along with a specialized lid-sheet to protect the sens

Replaces the filament guide for the M5C to accommodate a dryer on the side of the printer. See pic for an action shot! It's simple but works.

Instagram❤️ Facebook❤️ TikTok❤️ [*

Here is Filament spool with storage, This awesome design is designed to be used with Ams or other multicolour filament systems, Similar to my filament spool this multipart design simply screws togethe

remixed from: https://makerworld.com/en/models/164670?designId=164670#profileId-180842

D3P RISER FOR BAMBU LAB H2D - H2S - H2C by Darren 3d Print The D3P riser system is an innovative and modular riser system for your 3d printer. It features numerous free to download add-ons allowi

Follow up revision to the initial AMS dryer. This ducting has a modified profile to suit the TPU adapter gasket plugs. No need for supports as the only necessary ones are modeled in. I would recomme

D3P RISER FOR BAMBU LAB P2S by Darren 3d Print The D3P riser system is an innovative and modular riser system for your 3d printer. It features numerous free to download add-ons allowing you to cu

A printer stand for i3 printers with a relatively small floor footprint and intended for allowing for additions/modifications/etc. [You can find detailed info on the build here.](https://jfs-agri.com/

3d printable sunglasses. Pop these bad boys off the build plate and they are good to go! You may add a slight bend to them if you wish by using a hair dryer or heat gun.Insert a piece of 1.75mm filame

This model has been revised and updated here https://thangs.com/mythangs/file/1142209 Prototype air duct for use with PolyMaker PolyDryer and Bambu AMS. This allows you to use the AMS as an active dr

While messing with my silica gel to get it restored I realized that I had a dryer source sitting right next to my printers. I went looking for a model that would allow me to use my single spool filam