Desktop Caddy to store extra build plates, alcohol, glue stick, and some tools.

Bambu Labs Glue stick: https://tinyurl.com/BambuStick

99% IPA: https://amzn.to/3zPxyIu

Hex Scraper: https://tinyurl.com/HexScraper

AMS Disconnect Tool: https://tinyurl.com/AMSDisconnect

Bambu Labs Desktop Plate Holder.stl

Shallow drawer design with integrated dupont wire rack.  Designed for top slot of my Drawer set design. 

Dupont drawer contains remix of Windchime's Dupont wires holder
https://www.thingiverse.com/thing:2429184

Shallow Drawer with Dupont rack.stl

This is a big set of drawers I made for organizing my desk area.
The deeper drawers can be mixed and matched (need 3) 

20% infill no supports needed. 
Rack size 185w X 155t X150d


Updated shallow drawer available here
https://thangs.com/mythangs/file/74733

All of my Designs are covered by a Creative Commons Non-Commercial License.

Drawer set

Just a simple tray to set the Mars 2 in to catch any wayward resin drips.

ELEGOO MARS 2 DripTray v1.stl

I made this bar to elevate my lightbar on my Ender 5.  Attaches to top rail using single M3x10 screw and tnut.
Works with Light bar
Ultra Thin LED Under Cabinet/Counter Kitchen Lighting Plug-in, Dimmable 2 Coin Thickness LED Light with 42 LEDs
 here:
Aff Link
https://www.amazon.com/gp/product/B07MNRCR48/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07MNRCR48&linkCode=as2&tag=tuxydoh-20&linkId=df74510af005270c0ba12dfecc4f42b4

LightBar.stl

I made this bar to elevate my lightbar on my Ender 5. 

Works with Light bar here:
Aff Link
<a target="_blank" href="https://www.amazon.com/gp/product/B07MNRCR48/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07MNRCR48&linkCode=as2&tag=tuxydoh-20&linkId=df74510af005270c0ba12dfecc4f42b4">Ultra Thin LED Under Cabinet/Counter Kitchen Lighting Plug-in, Dimmable 2 Coin Thickness LED Light with 42 LEDs, Natural White Easy Installation 12V/1A 5W/450LM CRI90, 2 Pack, All in One Kit</a>

This is my work in progress cam mount for Ender 5. This has a slot that allows for a standard 1/4 20 tripod mount screw to attach it to the mount and allows a degree of adjustability. It attaches to the front bar of the Ender 5 using M3 screws and tnuts.  

https://creativecommons.org/licenses/by-nc-sa/4.0/

CAM MOUNT v4.stl

Made a quick little valet tray to hold wallet, keys, and coins after work. Enjoy!

Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. By downloading this design you are agreeing to these terms. 

Valet Tray.stl

Made a quick little valet tray to hold wallet, keys, and coins after work. Enjoy!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4980225.

I use the dryer as a holder box and do not feed directly into the extruder. So to try and keep outside air to a minimum I created this plug. It goes directly into the small plastic bushing they give you as a guide. 

Dryer Box 
https://smile.amazon.com/gp/product/B08P3BWHPJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. By downloading this design you are agreeing to these terms.

Sunlu Filament Dryer Filament Hole Plug

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Tuxydoh