Straighten out your workshop with Gridfinity modular storage - deploy these plates anywhere you need some order! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Versatile open-top storage blocks for the Gridfinity modular workshop storage system - multiple sizes for infinite options! Gridfinity is the ultimate organizer for your whole workshop! Learn more at

"6.25 mm Offset Snaps" screw onto a surface and attaches to a tile, creating a 6.25 mm gap. This part also connects four tiles together. This is a "Part A" piece, and attaches to four [Part B Snaps](

"6.25 mm Offset Snaps" screw onto a surface and attaches to a tile, creating a 6.25 mm gap. This part also connects two tiles together and usually goes on the outer edges of your board. This is a "Pa

"6.25 mm Offset Snaps" screw onto a surface and attaches to a tile, creating a 6.25 mm gap. This part usually goes on the 4 corners of your board. This is a "Part A" piece, and attaches to a [Part B

The “dual snap connector” is used to connect two tiles together with snaps. This is a “Double Sided Part B” piece, so it joins with the Dual Snap Connector - DS Part A to create nice looking snaps on

“Quad Snap Connectors” are used to connect four tiles together with four snaps. The Cross Quad Snap Connector - DS Part B joins with the Cross Quad Snap Connector - DS Part A or with the Cross Quad O

The “Double-Sided Snap - Part B” joins with any “DS Part A” Snap, like the Double-Sided Snap - Part A or the T Offset Snaps - DS Part A. Remember: Part A’s join with Part B’s. When joining them toge

Get the new Extra Fast Cura Profile from Filament Friday. This Filament Friday Extruder top 3D print is just a fun example for using the new Filament Friday Extra Fast Cura Profile that is part of the

Drill Sword Print-in-Place Version This version of the Drill Sword prints complete all as one piece. The Replaceable Blade Version is available to my Thangs member

This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The sword is designed to be printed with a ,4mm nozzle

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

“Snaps” are pieces that snap into the Multiboard tiles. They have a push-fit hole to insert push-fit accessories or screw in mid thread bolts. Learn more about this part at https://multiboard.io/know

The “Offset Snaps Removal Tool” helps you to remove Snaps - DS Part B from the Offset Snaps - DS Part A. It comes with three parts: The plunger, the handle, and the pad. Slide the handle into the lo

The Multiboard Demo Pack is a free pack that will show you the flexibility and magic of Multiboard with the least amount of parts. Watch the video tutorial: https://www.youtube.com/watch?v=5ujBraWJPV

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

This small stack allows you to test "Ironing Stack Printing" with your printer. Stack Prints are parts that are printed on top of each other. [Click here to watch a video tutorial](https://www.yo

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

This is a "Part B" Double-Sided Snap that connects to any Part A Snap. Printing Guidelines: Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

This object is part of Multiboard, an "all in one" 3D printed storage system that combines the best of all other systems into ONE design. With over 600 parts, Multiboard will give you almost everythi

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Fix Points allow for fast and easy installation and removal of any accessory part while still being sturdy. This is a “Small Thread” Fix Point that can screw into the small threads on the [Multiboard

Moderate Weight Bearing Snaps can hold more weight than Regular Snaps. This Snap is 'directional' and the arrow must be pointing up. Learn more about this part at https://

Dual Clips are a common Multiboard connection piece. They are mostly used to connect Plates or Tiles together, as well as beams, and Bin Dividers. Learn more about this part at https://multiboard.io/

This object is part of Multiboard, an "all in one" 3D printed storage system that combines the best of all other systems into ONE design. With over 600 parts, Multiboard will give you almost everythi

Safely grab the right tool with the Gridfinity modular workshop storage system! Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8

Moderate Weight Bearing Snaps can hold more weight than Regular Snaps. They only take weight in one direction and are inserted at an angle, with the arrow pointing upwards

Hey, the Gear Cube is not my original idea. The concept seems to be older than 2010. The first printable version I could find is by Emmett on Thingiverse. You need: 4 Big Gears 4 Small Gears 8 Co

Create your own battle droid army and take over the galaxy! Scale 1:9 (90% for 1:10) May the force be with you! Roger roger! [If you are interested in more Starwars kitcards then take a look at

Stitch If you like my work, share and give me a like. Follow me here: https://www.facebook.co

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Hook Snaps can hold more weight than regular Snaps and Moderate Snaps due to its 'hook'. This Snap is 'directional' and the arrows must be point

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Multiboard Snaps "snap" into the Multiboard Tiles. They have a mid-hole that can be used for bolt-locking inserts or screwing in threads. Printing Guidelines: Use 3 perimeter wall thickness, 0.2

This might be your future favorite fidget toy - rotating rings with textures - spin them and enjoy! Print the different styles and find your personal favorite - and then give the other prints as gift

Use the “Grip Removal Tool” to separate any Double Sided Snaps (Part A’s and B’s). The tool is made to be extra tight going into threads. Printing Guidelines: The printing orientation is as prov

This object is part of Multiboard, an "all in one" 3D printed storage system that combines the best of all other systems into ONE design. With over 600 parts, Multiboard will give you almost everythi

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Use the Locking Bolt to secure your board onto the Bolt-Lock Mounts. Screw them into place using a coin. Printing Guidelines: Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and

This object is part of Multiboard, an "all in one" 3D printed storage system that combines the best of all other systems into ONE design. With over 600 parts, Multiboard will give you almost everythi

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Use Single Border Tiles if you just need an individual Tile with nice borders on all sides. Optionally, you can build an entire board using only Single Border Tiles for simplicity (instead of combin

3D printing accessories for the Gridfinity modular workshop system - store tools, nozzles, and more! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity

Heavy Hook Snaps can hold more weight than Regular Snaps and Moderate Snaps due to their "hook". Unlike Moderate Snaps, Heavy Snaps can't fi

The “dual snap connector” is used to connect two tiles together with snaps. This is a “Double Sided Part A” piece, so it joins with the Dual Snap Connector - DS Part B to create nice looking snaps on

Collapsing Master Sword This Master Sword prints-n-place as just the hilt but extends in to a full sword. Its 250mm tall when printing but extends to 870mm long! The sword is designed to be printe

The Multitool is an all-in-one tool that allows you to screw in different types of threads. You can use it to… Screw “screw-in fasteners” into snaps. Screw “Multigrid T bolts” into the bottom of

The “dual snap connector” is used to connect two tiles together with two snaps. If you want to attach it to the wall you will need an 4.5 mm screw-in fastener. Learn more about this part at https://m