SKEWBITS (v1) // Premium Board + Case *OUTDATED*
✨ VERSION 2 IS NOW AVAILABLE ✨
This is an upgraded version of the SKEWBITS board. The thicker board snaps onto the various cases which can be used to store SKEWBITS problems. There is also a cover that snaps over the top of the board, so you can store all the bits in one nice package.
The cover can be printed blank, or use multipass printing to include the logo on the lid using the LogoA.stl and LogoB.stl versions of the cover. The 'thin' cover can be used to close the problem containers instead of the Premium board. This is useful if you have a lot of skewbits problems, so they can be stored in multiple containers.
Containers comfortably fit 10,15,20 and 25 pieces. For more than than I would suggest using multiple containers. For best results, store problems flat one by one. PLA parts smushed together may deform over time!
SKEWBITS (v1) // Premium Board + Case *OUTDATED*
EZPZ Screwdriver Bit Clip
IKEA FLISAT Bench TPU Feet // Floor Protector + Grip
EZPZ Pot Spacers // Airflow and Drainage for Plants
EZPZ TPU Cable Clip Collection // Quick, Flexible, Cable Clips
EZPZ Dummy Nail // Damage Free Wall Hanger Collection
EZPZ Wall Hooks Collection // 17 Variations (and counting!)
EZPZ Shelf Hook Collection // Type 1
EZPZ TPU Cable Clip (4mm)
Caliper Undercut Gauge Adaptors
EZPZ Wall Hook // Type A 36mm
EZPZ Small Shelf Hook // Type1
EZPZ Tube to Wall Mount
Moss Dish/Frame for 100mm Chunky Puck Drip Tray
IKEA Bekväm TPU Feet // Floor Protector + Grip
Sink Brush Hanger // TPU Brush Loop Kitchen Organizer
SHIMMER 03 Planter
SHIMMER 02 Planter
SHIMMER 01 Planter
EZPZ PS5 Controller Wall Mount
Is there a way to combine the Logo A and Logo B files into one so that it will print properly on a Bambu Lab X1-Carbon? You mention multipass printing, but I do not know what that is and Google isn't being very helpful.
I combined them in Orca Slicer and printed them as an assembly, This has worked great for me, Just needs some alignment.
For the premium board, what layer should the filament swap take place? It looks like after 35 to me, but would like to be sure.
Layer 36 worked for me in Orca Slicer at 0.2 layer height