Style & Substance for your Voron!

Add a little flare to your Voron Trident or 2.4 with this touchscreen mount! Klipperscreen is an excellent touchscreen interface for Klipper based printers. This mount allows you to use a BigTreeTech Pi TFT43 on your Voron.

This is a Remix of cneshi's design. Some geometry changes were made to clean up minor errors and fitment. The largest changes are cosmetic. I've created 5 faceplate variations. 2 are Multi-Color versions with Hex designs & the Voron logo (1 with the LDO logo).

Requires additional hardware:

• 5x - M3x8
• 3x - M3 Roll-In Nuts (or T-Nuts)
• 2x - M3 heat press inserts

Parts Needed (Affiliate Links):

• BTT PiTFT43: http://shrsl.com/422xl
• M3x8 Screws: https://amzn.to/3AYdAMc
• M3 Heat Inserts: https://amzn.to/3LEMezN
• Polymaker Filament: https://tinyurl.com/Polymakerr

Files Included:

• BTT Pi TFT43 Mount & Faceplate STEP File
• BTT PiTFT43 Mount STL
• Blank Faceplate STL
• Voron Logo Faceplate STL
• Voron / LDO Logo Faceplate STL
• Multi-Color Hex / Voron / LDO STL
• Multi-Color Hex / Voron STL

Recommended Print Settings:

• 3 Perimeters
• 20% Infill
• No Supports Required
• PLA filament is generally fine for this application. If near hot components ASA or ABS would be preferred.
• "Multi" STLs require using "Split -> To Objects" in your slicer. Then you can color the individual bodies.

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.MandicReally.com/links

Design covered by GPL3 Open Source license. Any Remixes or Derivatives are required to adhere to license terms & use the same license.

PLEASE Attrubute any Remixes of my designs: MandicReally