Don't let your Neptune 3 cables be a DRAG! Neptune 4 either!

The new Elegoo Neptune 3 Plus / Max (And Neptune 4 Max & Plus) lines are an excellent lineup of 3D printers, but they have one major flaw. The cable going to the toolhead drags on your print bed while printing and can snag on printed parts causing print failure. Elegoo includes a single P-Clamp to mount this harness and it simply is not enough to do the job adequately.

This design angles the cable upward, away from the print area. It also more securely mounts and strain relieves the harness for better long term reliability.

Requires longer screws for mounting and a pair of Zip Ties.You can reuse the original harness M4 screw for the 3rd mounting hole of this bracket.

Parts Needed (Affiliate Links):

• 1x - M4x10mm Screw: https://amzn.to/40Csxzc
• 1x - M3x20mm Screw: https://amzn.to/3DRcZxA
• 3x - Zip Ties: https://amzn.to/3jKNV4Q
• Elegoo Neptune 4 Max: https://tinyurl.com/Neptune4Max
• Elegoo Neptune 4 Plus: https://tinyurl.com/Neptune4Plus
• Elegoo Neptune 3 Max: https://tinyurl.com/Neptune3Max
• Polymaker Filament: https://tinyurl.com/Polymakerr

Files Included:

• Neptune 3/4 Cable Mount - STEP File
• Neptune 3/4 Cable Mount - STL

Recommended Print Settings:

• 3 Perimeters
• 10% Infill
• No Supports Required
• PLA filament is fine for this application.

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.MandicReally.com/links